Yutkin effect, plant growth stimulants, nitrogen splitting, fertilizers, "kV" installation, water collider, electrohydric impact, cold canning, electrohydric impact effect, electrophoric capacitor, gas diode. Yutkin effect, water hammer or pressure
Read also
For more than seventy years, humanity has known more than effective method transformation electrical energy into mechanical, through the electrohydraulic Yutkin effect (EGE). But, as always, the effect is not used in everyday life, there is nothing about it and its author in Wikipedia, and official science really does not like to remember either the effect itself, much less its author Lev Yutkin with his more than a hundred inventions . This is all due, as always, to super-efficiency and an efficiency of several thousand percent, which, as we know from official science and physics textbooks, cannot be!
The outstanding Soviet physicist and inventor Lev Aleksandrovich Yutkin was born on August 5, 1911 in the city of Belozersk, Vologda region. He entered the university only in 1930, after two years of forced labor at a factory as a turner “due to class insecurity.” In his fourth year at university, in 1933, Lev Yutkin obtained the first serious results on the electrohydraulic effect. Soon after his discovery, in the same year of 1933, he was imprisoned under Article 58 (treason). Accused of trying to blow up a bridge with his EGE! The opinion was formed that Yutkin invented his EGE only in 1950, since it was in this year that the effect was patented, but this is not so! The vast majority of research on the topic of the electrohydraulic effect was carried out and completed by him back in the 30s, and according to him, he formed the complete theory of the electrohydrodynamic effect back in 1938.
Himself electrohydraulic Yutkin effect or briefly EGE is a powerful water hammer with a local pressure above one hundred thousand atmospheres, which occurs during the passage of a spark discharge high voltage, through the water gap. That is why “people” simply call this effect water hammer, although in fairness it should be noted that the scientific meaning of water hammer is far from this phenomenon and has nothing to do with Yutkin’s EGE.
To obtain an EGE alternating current from the network is supplied to a step-up transformer, where the voltage increases to several kilovolts. Further electricity rectified by diodes and fed to a capacitor, where the voltage accumulates to the desired value. After this, a high-voltage breakdown occurs between the electrodes placed in the water, which gives rise to an electro-hydraulic shock, manifested in the form of a loud bang with a local increase in pressure of several tens of thousands of atmospheres.
One of the most serious practical values and advantages of this effect is its 100% repeatability and ease of implementation even in at home, without the use of expensive laboratory equipment and materials.
The author himself has repeatedly modernized and improved his developments, for example, the same circuit diagram was ultimately implemented using two spark gaps, which, according to its creator, greatly increased the steepness of the pulse fronts and made the circuit much more efficient and easier to configure.
In addition to the appearance of local pressure of several tens of thousands of atmospheres, which the author successfully used, for example, for crushing stone boulders into small pieces or for pressing metals, this effect is also accompanied by several other useful and amazing properties. If you try to select everything amazing properties EGE, then it turns out something like this:
— Local increase in pressure to several tens of thousands of atmospheres. Due to the incompressibility of water and, as a consequence, the distribution of this pressure throughout the entire water volume, this property can be used for crushing and grinding rock, metal pressing and stamping, as well as for converting into other types mechanical energy, for example, in torque through the use of crank mechanisms of a special design.
— Local increase in temperature. According to the author and independent researchers of this effect, in the presence of EGE, the temperature of the liquid increases disproportionately faster than the electricity spent on EGE, which makes it possible to build highly efficient heating devices based on this effect. This heating property appears together with the above-mentioned property of local pressure increase, which makes it advisable to use these two properties simultaneously.
— Release of Brown's gas from water. Since this property was discovered not by the author himself, but by his later followers, this property is not so well studied, especially in its quantitative part, but its very presence, as mentioned earlier, does not cancel the previously described properties and makes it possible to use all three the main properties of the electrohydraulic Yutkin effect at the same time!
More details technical information on this effect and other discoveries and inventions of the author can be found in the proposed book.
And to help practitioners, we offer an excellent resource where you can find connection diagrams for transformer windings, designations of the beginnings and ends of transformer windings, groups of winding connections and much more practically useful information in electrical engineering.
The author of the channel “Show “IGIP” presents the topic of the experiment “Yutkin’s Electrohydroelectric Effect”. Its essence is that when a high voltage discharge passes through a liquid, we experience several physical phenomena: from evaporation to electrolysis. As a result, we get an instant increase in pressure and a noticeable water hammer. Let's check the effect in practice by creating an installation for this with our own hands. At the end of the second publication homemade installation to study this phenomenon. It was developed by another author.
By the way, the proposed capacity is quite enough to crush stones. In Germany, even equipment for the production of crushed stone is produced on this principle. The Yutkin effect was obtained wide application in medicine and technology. Unfortunately, charlatans also liked the Yutkin effect. Therefore, he is credited with anything: from free electricity to cold nuclear fusion. To the point, they do not believe that the Yutkin effect can turn water into something that gets rid of all diseases worse than urine therapy.
But that's not what we're here for. Let's assemble the setup and conduct some experiments with our own with my own hands. The main unit of the demonstration device is a bank of capacitors. The capacitors were purchased at a local flea market. Next in line are arresters: airborne and underwater. They will be made in two pieces breadboard using a wire.
To begin with, we solder the capacitors together, in parallel. Let's make two blocks of four each. We soldered it, now we have two blocks of capacitors. This is done for this reason: there are two blocks of capacitors, 4 kV 0.4 μF each. Now you can turn them on, either in parallel, by short-circuiting these two pins, or in series. In the first case we will have 0.8 µF at 4 kV, and in the second case 8 kV 0.2 µF.
In this experiment to reproduce the Yutkin effect, we will connect them in parallel, so now we will short-circuit the two terminals using a piece of copper wire. By the way, this same piece of copper wire will be one of the terminals of the arrester. Therefore, we bend it with the letter G and solder it onto our board. Please note that the ends of the arresters must be sharpened, sharpened to a needle. We'll do this a little later with a needle file. Now we will solder them onto the base.
In the same way we prepare the second output of the arrester. That's it, the spark gap is almost ready, all that remains is to sharpen these two electrodes. Now we connect the spark gap with the capacitors with this wire, and then we do parallel connection capacitors. Next, we make a second arrester, take another piece of wire, but do not immediately remove the insulation from it with our own hands. We remove 4 centimeters of insulation from each side, level it and wrap it around a blank of a suitable diameter.
Continued from minute 5 on the video about the Yutkin effect.
Another design that consists of 6 parts.
The heart of Yutkin's installation is the capacitor. It can be made at home. It's very easy to do. Foil, film, sock and ball. The ball presses the foil. The head of the installation is a forming spark gap. It's also easy to make. Ignition coil from a car. Electronic transformer, it can be purchased at any store. We rewind the winding and get 24 kilovolts. We connect this device to the capacitor through a diode to the forming spark gap. We remove the latter from the microwave. We connect the cavitator, which is standing in the water. Spring water. Turn it on.
Please note: the water begins to become cloudy. The minerals in the water are crushed. Water turns from hard to soft. After drinking a glass of this water, you will feel inner warmth.
Russian State Geological Prospecting University, Moscow.
Abstracts of the report at the XI International Conference "New Ideas in Geosciences"
April 2013
"WATER COLLIDER"
Authors of the report
A.A. Nasyrov, V.N. Pocheevsky, S.V. Pichugin, I.L. Pavlenko, V.S. Shobyrev
For more than seventy years, humanity has known an extremely effective method of converting electrical energy into mechanical energy, using the Yutkin electrohydraulic impact effect (EHE) method. But as always, the effect is not used in everyday life, there is nothing about it and its author in Wikipedia, and official science really does not like to remember either the effect itself, much less its author Lev Yutkin with his more than a hundred inventions. This is all due to, as always, super efficiency and an efficiency of several thousand percent, which, as we know from official science and physics textbooks, cannot be!
The Yutkin electrohydraulic effect itself, or EGE for short, is a powerful hydraulic shock with a local pressure above one hundred thousand atmospheres, which occurs when a high voltage spark discharge passes through a water gap.
This is why “people” simply call this effect water hammer, although in fairness it should be noted that the scientific concept of water hammer is far from this phenomenon and has nothing
common with EGE Yutkin. LET'S EXPLAIN!!!
During a spark discharge in water, the temperature at the point where the streamer starts increases to 40 thousand degrees.
Oxygen, hydrogen and other gases burn, forming vacuum bubbles.
Arises cavitation effect- avalanche-like compression of vacuum bubbles.
The pressure arising at this stage, according to scientists, can reach more than 300 thousand atmospheres.
It is not surprising that there are no materials that can withstand cavitation from an electric spark in water.
The water collider is an analogue of the android collider. In the "KV" installation the same processes occur, only in water.
During cavitation, enormous pressure arises, more than 300 THOUSAND atmospheres, atoms of substance molecules collide and new substances are born.
Using the "KV" installation in everyday life.
"WATER COLLIDER"
A pulsed high-voltage voltage is applied to the electrodes; when lightning occurs, we obtain a cavitation effect with simultaneous disinfection of peat pulp and the production of humic fertilizers.
Productivity - 1 liter of concentrate per minute, from which 100 liters of humic fertilizers can be prepared.
add 80 liters of water, leave for three days and 100 liters of humic fertilizers are ready!
You will receive "MIRACLE WATER" if you water and spray the plants with this water, they stop getting sick and the harvest increases significantly.
The Yutkin effect inhibits pathogenic microflora and activates the activity of beneficial soil fauna.
Treating fruits and vegetables with “MIRACLE WATER” increases their shelf life several times!
COLD PRESERVATION OF JUICES.
Video from Channel 1 TV program "Test Purchase"
Using the "KV" installation, you can cold preserve milk, juices, vegetables and fruits without boiling water, while all the vitamins in the products are preserved and they are stored for a long time without changing their taste.
After pasteurizing the wine using the Yutkin effect, pour the wine into bottles and seal it from air!
With the help of "MIRACLE WATER" ponds and lakes are effectively restored, the water becomes clear within a week, the fish stop getting sick and the microflora in the entire lake is restored!
- “MIRACLE WATER” is a powerful barrier to viruses!
By consuming "LIVING WATER" in medicinal purposes, You will live a long time, as the body is cleansed at the cellular level and life cycle cells increases.
The whole body is cleansed of pathogenic bacteria, and immunity is increased.
Colloidal gold - enhances medicinal properties healing herbs!
Using the Yutkin effect in the KV-4 installation, it is possible to obtain colloidal gold with particles less than 10 nanometers; you can read about the miraculous properties of colloidal gold on the Internet!
In this installation, using the cavitation effect, it is possible to obtain stable combustible mixtures such as “diesel fuel + water”, “fuel oil + water”, etc.!
Using the Yutkin effect, you can crush coal, mix it with water and waste oil - for heating your home.
By using the "KV" installation to prepare water for heating, scale will stop forming in the pipes and the heat transfer of water will increase.
Using the Yutkin effect, it is possible to obtain water from the air (Water under enormous pressure turns into water dust, becomes electrified - during movement it cools and attracts water from the air. Tests are being conducted on cheap desalination sea water this method!)
video from TV program https://www.rline.tv/programs/ryadom-s-toboy/
Testing of the "KV - 1" installation
November 2013 - MOSCOW.During tests of the KV-1 installation, I noticed that nearby capacitors with a connected capacitor are charged in the same way as the connected one.
EXPLANATION OF THE EFFECT:
A pulse is applied to the capacitor D.C. 24 kV, frequency 30 kHz, current 30 mA.
In capacitors, charge occurs in the dielectric.
If you apply a constant high-voltage pulse current with a high frequency to the capacitor (1,2), then a constant pulse electric field appears around the capacitor, which charges nearby capacitors (3,4) in this electric field. (Electrophoric machine effect),
By connecting such a capacitor to the circuit as shown in the figure, a soft (extended) discharge is obtained with a small capacitor capacity.
Power consumption is 150 watts, but the cavitation effect produces tens of kilowatts, which theoretically can be used in various mechanical devices!
Electrohydraulic shock installation "KV - 2"
with an electrophoric capacitor.
Tests March 2014 - MOSCOW.(watch the video)
Electrohydraulic shock installation "KV - 3"
with high voltage choke.
Tests January 2015 - MOSCOW.(watch the video)
Electrohydraulic shock installation "KV - 4"
with the effect of one turn.
Tests August 2016 - MOSCOW.(watch the video)
On the Internet, the cost of installation with the Yutkin effect starts from 200,000 rubles!!!
But!!! You can install the KV-4 yourself by making a donation
Electrohydraulic shock installation "KV - 5"
with two air dischargers.
Tests January 2017 - MOSCOW.(watch the video)
You can install the KV-5 yourself by making a donation
for further development in the amount of 5,000 rubles!
You will spend approximately 10,000 rubles on parts and a day of time to assemble and configure the installation.
Electrohydraulic shock installation "KV - 6"
for laboratory testing.
Tests July 2018 - MOSCOW.
(watch the video)
You can install the KV-6 yourself by making a donation
for further development in the amount of 3,000 rubles! You will spend no more than 3,000 rubles on parts and a day of time to assemble and configure the installation.
| Vitaly Semyannikov Andrey Vladimirovich Ivanov - Barnaul Vasiliev Yu. E. - Moscow Myachin Alexander Ivanovich - Ivanovo Victor Ivanovich Kashchenko - Evpatoria. Crimea Derbenev Andrey Vasilievich - Ekaterinburg Stanislav Vitalievich Bodin - Moscow Andrey Khokhlov - Tver region. Kimry Oleg McRite - Orangeville Canada Yuri Yakovlev - Yakutsk Alexander Kagarmanov - Ekaterinburg Alen Kucharavy - USA RIMANTAS LIACAS - Klaipeda Zuhurov Parviz Islomovich - Stavropol Oleg Ananchenko - Volgograd region. Simonov Nikolay Viktorovich - Severodvinsk David Tomadze - Georgia. Gilin Viktor Fedorovich - Perm Gilin Sergey Fedorovich - Perm Igor Naumets - Moscow Novotorzhentsev Alexey Ivanovich - Kurgan Andrey Shemshuk - Moscow Alexander Goberman - Chicago Evgeniy Orlin - Vologda Valery Palekh - Belarus, Gennady VORONIN - Vologda Region Igor Pavlenko - Omsk Radislav Latypov - Ufa Vyacheslav Gladyshev - Arkhangelsk Alexander Nasyrov - Moscow Sergey Pichugin - Moscow Valentin Shobyrev - Moscow Evgeny Shevelev - Nizhny Tagil Victor Zhuravlev - St. Petersburg Vladimir Khokhlov - Barnaul Ermakov Maxim - Vladimir Vasily Davydenko - Kiev Gershgorin Igor - Israel Vyacheslav Safronov - Khakassia. Abakan Lubomir - Slovakia. Bratislava Rafikov Radik - Ufa Baev Sergey - Nizhny Novgorod. Dmitry Syrkin - Moscow region. Kashirsky Igor - Moscow. Alexey Kislyuk - Krasny Sulin, Rostov region Gizatullin Nail - Almetyevsk. Kim Yuri Vasilievich - Kazakhstan. Anatoly Khobot - Ukraine. Kanan Babayev - Baku. Alexey Malkov - Pervouralsk. |
Luzin Vladislav Yurievich Andrey Chevola - Krasnodar. Ilsur Galiev - Orenburg. Lazutkin Georgy - Armavir. Roman Zhdanov - Moscow. Smirnov Fedor Nikolaevich - Moscow. Borsch Nikolay Vitalievich - Moscow. Sergey Khodun - Kyiv. Smirnov Yuri Nikolaevich - Moscow. Andrey Erlich - Werl, Germany. Ponyatov Nikolay Grigorievich - Samara region, Novokuibyshevsk Alexey Elavin - Vyksa, Nizhny Novgorod region. Sergey Smirnov - Vyksa, Nizhny Novgorod region. Eduard Savin - Ecuador. Dualet Orynbaev - Kazakhstan. Marynkin Igor Aleksandrovich - Moscow. Balashov Konstantin Igorevich - Belgorod. Kazakov Eduard Vladislavovich - Krasnodar Vladimir Dobroskokin - Krasnodar Kutepov Sergey Vasilievich - Khimki Andrey Temnikov - Maykop Igor Khvashchevsky - Belarus, Igor Leiko - Dnepropetrovsk Vladimir Gomonenko - Kursk region Vladimir Anakin - Almaty Slashchinin Yuri Ivanovich - Sergiev Posad Mubariz Ismailov - Baku Victor Nasonov - Voronezh Zhirnov Vladimir - Cheboksary Vladimir Medeltsev - Krasnoyarsk Maxim Morozov - Bryansk Sergey Semashko - Novosibirsk Konstantin Rumyantsev - St. Petersburg Bahodirov Abduvali - Tashkent Nikolay Marynyuk - Ukraine Alexander Nikolaev - Maykop Igor Titarenko - Bratsk Vorobiev Alexander - Ulan-Ude Victor Pleshakov - Smolensk region Andrey Tereshkin - Arctic, Yakutsk. Sergey Poddubny - Odessa. Boris Emelev - Norilsk. Alexander Ugryumov - Hungary. Denis Mironov - Blagoveshchensk. Shibanov Vitaly - Krasnodar region. Daraev Alexey Andreevich - Moscow. Fedorov Maxim - Sevastopol. Roshchupkin Yuri Vyacheslavovich - |
Installation "NITROGEN" on the Yutkin effect.
KV-7 plus powerful "OZONATOR"
Ozonized air is supplied to the electrodes; when lightning occurs, we obtain a cavitation effect while simultaneously disinfecting water from pathogenic bacteria and producing nitrogen fertilizers.
The power consumption of the installation is 70 watts.
Productivity - 1 liter of concentrate per minute, from which 100 liters of nitrogen fertilizers can be prepared.
It's easy to do:
Dilute 1 liter of concentrate in 20 liters of water, after 3 days nitrogen-fixing bacteria will begin to colonize,
add 80 liters of water, leave for three days and 100 liters of nitrogen fertilizer is ready!
This amount of fertilizer is enough to spray 0.5 hectares of crops.
If you add peat to the water at a ratio of 5 to 1, you will get a complete complex fertilizer for all types of plants!
YOU CAN INVEST IN THE FURTHER DEVELOPMENT OF THE "KV" INSTALLATION,
ON CONDITIONS THAT ARE FAVORABLE FOR YOU AND BECOME A CO-AUTHOR!
Having provided financial assistance for further development domestic installation"KV".
You become a co-author of the invention.
In the future, you will receive reports (diagrams and drawings upon request from the co-author's email) about the work done to improve the "KV" installation, based on which you can create industrial installation"KV".
The issue price is 15,000 rubles.
Target people's program"REVIVAL OF SPRINGS OF RUSSIA" to create from available parts a household installation "KV" to restore the ecology of the Earth and make the work of farmers easier.
For the most part, co-authors make the “KV” installation to create, not destroy.
Everyone chooses their rights and responsibilities for themselves!
You have to make many parts for installing the "KV" yourself at home,
since our industry does not produce them!
Those wishing to install "KV - 1" at home from available materials,
can download FREE detailed technical documentation in photographs
for the production of household installation "KV - 1"
Donation for documentation on the production of "KV - 4" (5,000 rubles.)
Donation for documentation on the production of "KV - 5" (5,000 rubles.)
Donation for documentation on the production of "KV - 6" (3,000 rubles.)
Donation for documentation on the production of "KV - 7" (8,000 rubles.)
Become a co-author and receive documentation for "KV - 4", "KV - 5", "KV - 6", "KV - 7" (15,000 rubles.)
You will receive the OZONATOR manufacturing technology as a gift!
In the future, you will receive new technical information upon request by email to the co-author!
Within 24 hours, after a notification letter by E-mail: [email protected]
Account number: 4276380050142798
VLADIMIR POCHEEVSKY
Your money will go
for the further development of the KV electrohydraulic shock installation.
Interregional program "REVIVAL OF SPRINGS OF RUSSIA"- is the PEOPLE!
We work only on private donations from citizens and do not accept funding from commercial government and political organizations.
HEAD OF THE PEOPLE'S PROGRAM "REVIVAL OF SPRINGS OF RUSSIA"
Vladimir Nikolaevich Pocheevsky Tel: 8-965-289-96-76
Electrohydraulic effect
Animation
Description
The essence of the effect is that around the zone of a specially formed pulsed electrical discharge inside the volume of liquid located in an open or closed vessel, ultra-high hydraulic pressures arise that are capable of performing mechanical work.
During the hydraulic effect, there is an instantaneous (10-100 μs) release of energy accumulated, for example, in a capacitor bank through a pulsed discharge in a liquid. During the discharge, a plasma channel with a temperature of 15-30 thousand K is formed. In a channel with a small cross section, intense local heating of the liquid occurs. At the same time, the energy of superheated ionized gas and steam is concentrated in it. Rapid expansion of the discharge channel in the form of a vapor-gas cavity (bubble) under the influence of internal pressure creates compression waves and pressure pulses in the surrounding incompressible medium (liquid). With intense energy release in the channel, the speed of its expansion can exceed the speed of sound in the liquid, then the compression wave turns into shock wave. The expansion of the cavity continues until the pressure in it, due to the inertia of the diverging fluid flow, becomes less than the pressure external environment. From this moment, the liquid moves in reverse (the cavity slams shut), the gas pressure in it increases sharply and the process repeats in the form of several gradually decaying pulsations.
A high-voltage pulsed discharge in a liquid can be considered in the following sequence: electrical breakdown and formation of a discharge channel, energy release in the channel, amplification of shock, ultrasonic and sound waves, expansion of the cavity, accompanied by the generation of a pressure pulse with the formation of a divergent flow of liquid, pulsation of the cavity.
Amplitude of shock pressure during the electrohydraulic effect in a cylindrical container:
,
where V sh is the speed of shock wave propagation;
r is the density of the liquid;
E 0 - volumetric compression modulus of the liquid;
E - elastic modulus of the material;
d - internal diameter of the working volume;
d is the wall thickness of the working volume;
V 0 - speed of sound in liquid.
The manifestation of the physical effect occurs only in a conductive liquid on almost all geometric shapes, which the liquid accepts.
Timing characteristics
Initiation time (log to -2 to -1);
Lifetime (log tc from -1 to 1);
Degradation time (log td from -1 to 0);
Optimal development time (log tk from 0 to 1).
Diagram:
Technical implementations of the effect
Technical implementation of the effect
Method and device for excitation of hydraulic shock waves by a high-voltage pulse discharge between plate, fixedly installed electrodes (Fig. 1).
Excitation of sound waves spark discharge in liquid
Rice. 1
Pulse voltage is applied to electrodes immersed in liquid. A discharge occurs between the electrodes, generating an acoustic shock wave in the liquid.
Applying an effect
The unique capabilities of the electrohydraulic effect have led to its widespread use in many areas National economy: in mechanical engineering technology and metalworking, in welding and transport devices, in mining and industry building materials, in the chemical industry, in electrical engineering, in power plants, in medicine.
In particular, the electrohydraulic effect is used for crushing and grinding solid minerals and slags, drilling rocks, removing scale from castings; grinding fibrous and lamellar materials, also used for stamping, pressing, drawing metal sheet materials; for obtaining colloidal solutions, emulsions, suspensions; for pulsed supply of liquid under high pressure.
Improving the quality of products in a number of cases is associated with ensuring guaranteed chemical composition its material, which can be achieved using methods powder metallurgy when using powders of strictly regulated shapes and sizes. The use of mechanical crushers here turns out to be ineffective, which is associated with wear of the tool and the entry of its particles into the prepared powder. The function of the tool in electrohydraulic crushing is performed by liquid, most often water.
For quite some time now, many scientists have known the most unimaginable way of converting electrical energy into mechanical energy, which is commonly called the “Yutkin Effect”. However, this method was rejected long ago, they tried to hide access to information, and practically nothing is known about the author himself.
Such stringent measures were due to the fact that this method was particularly effective and Useful Action- more than 1000%, but official science cannot tolerate this. Therefore, this scientist has been criticized more than once. However, years later, based on his inventions, powerful technologies were created that are now used in China, Japan and Germany.
Lev Aleksandrovich Yutkin is a fairly well-known and outstanding scientist of the 30s, who developed more than 100 inventions and came up with a truly amazing method of energy conversion. This method EGE, as it is commonly called, is a water hammer with a powerful pressure of 100,000 atmospheres or more, which appears after charging a high voltage spark through a water gap.
To obtain such an EGE, it is necessary to apply alternating current to a transformer, where the voltage will increase and the current is rectified by diodes, after which it is supplied to a capacitor and accumulates desired value. After this, a water hammer occurs (a loud and strong bang is very high power), which increases the pressure to 10,000-100,000 thousand atmospheres. The interesting thing about this experiment is that it can be repeated at home without using expensive technical devices.
How to conduct an experiment at home?
This experiment will help anyone to obtain from available materials fast growth pressure and feel a real water hammer. If you believe Yutkin’s notes and experiments, such a blow can crush boulders and huge stones.
To conduct the experiment you will need:
- Capacitor bank;
- Two arresters (air and underwater);
- Bread board;
- Wire (a meter is enough);
- Knife, pliers, soldering iron;
- Other small handy tools.
Actions:
- Make capacitors by soldering them together - in parallel (2 blocks of 4 pieces - 4 kV 0.4 µF);
- Short-circuit the two terminals in parallel and in series;
- Get 0.8 microfarads at 4 kV and 8 kV at 2 microfarads;
- Now you need to short-circuit the two outputs copper wire(they will be the output for the arrester);
- Bend the structure with the letter r and solder the board (the ends of the arresters must be sharpened);
- Solder everything into the base;
- Make electrodes that will be the necessary adapters.
As a result, you should have capacitors connected to each other, a spark gap sharpened for a needle, electrodes and any generator. After that, the electrodes must be placed in a vessel with water and the generator must be started. Then you can observe the experiment itself and the Yutkin effect.
This experiment will clearly show how you can convert energy and at the same time receive a powerful charge or water hammer.