DIY paths made of granite chips. Garden path made of granite screenings Crushed sand screenings paths in the country

Construction of a garden path from granite screenings is one of the most inexpensive and simple ways lay reliable, durable and beautiful paths by dacha or garden plot. It is no coincidence that in all suburbs, paths are made exclusively from granite screenings. In England, many garden paths are made of medium-sized crushed stone. Such paths are much cheaper than natural stone or concrete paving stones.

We are building a path from granite stones around the house. In combination, the screening path will serve to drain water from the foundation of the house. Since our soil is peat, and the foundation is pile-grillage (with a high grillage, that is, hanging above the ground), a real blind area around the house is not needed. There is also no need for soil insulation: freezing of peat under snow is minimal (20-30 cm). The dropout path will only support pedestrians or cyclists. A road made of screenings for cars or a device will require laying geotextiles and road mesh, backfilling with a layer of crushed stone and only then - granite screenings.

To begin with, peat is removed from the screenings to a depth of 1-1.5 shovels under the path. Geotextiles with a density of 120 g/m2 are laid on the peat. Crushed stone, gravel, and coarse sand can be poured on top of geotextiles. We had at our disposal a mixture of sand, small crushed stone and loam. Having thoroughly mixed the mixture, we laid it, forming a slope from the house with a difference of 12-15 cm by 1.5 meters. The mixture under the path was trampled and compacted. For tamping, a vibrating platform, a hand roller or a tamper made of logs or timber is used.		A path made of granite screenings necessarily requires a curb. The border will prevent soil and vegetation from penetrating the path and will protect it from blurring the edges. We use a garden ribbon border for the path. You can also purchase reinforced curbs and use concrete ones as a curb. curb stones, siding, wooden slats, bars, a natural stone or old linoleum.
Sprinkle the border of the garden path with sand. The tape should protrude at least 1 cm above the track level. The depth (height) of the border strip depends on the thickness of the fertile layer. By default, the deeper the garden path curb is from the screenings, the better.		Sprinkle the surface of the garden path with a 5-10 cm layer of sand and level it using the back of a rake. This layer will protect the next layer of geotextile from damage. We compact the layer again, maintaining the formed slope of the garden path away from the house.
We spread geotextiles over the sand layer of the path. It is best to use non-woven non-woven geotextiles for garden paths - it allows water to pass through well. In our case, geotextiles allow water to pass through worse - but this is not bad - the geotextile layer will drain water away from the house towards the ring drainage.		They brought us granite screenings. Near St. Petersburg, screenings come in three colors: gray, pink and red. They cost the same. But: the gray screening does not look good, the red screening happens with increased level radiation. Therefore, our choice for the garden path is a safe and beautiful pink granite screening.
We begin to sprinkle geotextiles on the path with granite screenings. We join the geotextile sheets with an overlap of 30 cm. The overlap is made in such a way as to drain water away from the house. First, we fix the geotextile screenings on the ground in small portions so that it is not blown away by a gust of wind.		Then we pour a layer of granite screenings onto the path 10 cm thick.
Screenings on the garden path are leveled reverse side rake, compacted with a platform, hand roller or tamper. Then the granite screening path is sprayed with water (sprayed) to settle and wash away fine dust so that it does not carry on shoes into the house.		After a few good rains and under load, the seedings on the garden path will finally settle and harden, forming a smooth and durable surface of the garden path. Do you want to ask what this pile of stones is for? This is a homemade drainage well for precipitation from drains.
On a base of screenings or crushed stone, then, if desired and funds become available, you can lay paving slabs. To lay paving slabs, a layer of road geotextile is laid on top of screenings or crushed stone and a layer of sand is poured. The sand is compacted and paving slabs are laid on top.		Laying paving slabs on top of a crushed stone walkway base.
Decomposed granite, or granite sand, is a dense packable material that is long-wearing and resistant to erosion and settlement. Garden pathways made from granite sand are attractive and durable pavements. Granite sand pathway is a good choice for small garden for simplicity and ease of construction. Decomposed granite gives you a natural look that you can use to enhance your natural landscape.

When improving the site or country house, for more sophistication a great option will be the application natural materials. Great solution of this kind is a garden path made of crushed stone. The material is not only a natural, but also an inexpensive product with which you can build a strong and reliable design. Thanks to natural properties, crushed stone tends to withstand heavy loads. Also, the design does not require a drainage device.

It is worth remembering some features and nuances of using crushed stone. The surface used must be perfectly flat. For some, a specific sound when walking will be an inconvenience, but at the same time, the owner will always hear about strangers approaching or being on his territory.

First of all, you need to decide on the material used. For greater durability and preservation appearance, it is recommended to use granite or limestone crushed stone. The presented options are not covered with mold and various kinds pests, so they can last quite a long time long term. Thanks to its textured, sharp edges, the material adheres perfectly to cement, which significantly facilitates and speeds up the laying process. Coarse-grained crushed stone has quite sharp corners, it is uncomfortable to walk on barefoot, and if you fall you can be seriously injured.

The most popular options for the material used

Granite crushed stone

For roadways, it is preferable to use large rock material. It is characterized by high strength, wear resistance, hardness, and is practically not subject to negative influence moisture and frost, and also does not slip in icy conditions. Such crushed stone is used extremely rarely for garden paths.

crushed gravel

Great option for hiking trails different types with various twisting shapes. The material is absolutely environmentally friendly and quite durable. It has a relatively low price and is available in several sizes. Of the minuses, it is worth noting the fact that gravel paths over time they become overgrown with weeds.

Having round shape, the material is quite uncomfortable for walking, so it is used mainly as a decorative element. When mixed with gravel, the structure becomes more stable and attractive.

Granite screening

As a rule, the size of the fractions is 2.5 mm. The material has many shades, ranging from gray tones to red and pink. For achievement best result And beautiful view It is recommended to combine colors.

Laying a garden path from crushed stone with your own hands. Stages of work!

The first step is compacting the soil mechanically, from the surface of which the top fertile layer is cut off in advance. The base of crushed stone is laid with a thickness of 16 to 32 mm and covered with sand with a fraction size of no more than 7 mm. The particles are then mixed, and about 4 cm of the height of the supporting layer is lost.

After compaction, a foundation strip is made of lean concrete along the edges of the path, or laid out from other materials. The end result will be a border that, in addition to decorative element, will keep the structure from spreading.

The last thing will be the formation of the top decorative layer. In this case, crushed stone is used various breeds, depending on the preferences and taste of the owners. As a rule, only one type of fraction is used, coarse or fine grain.

Work on arranging crushed stone paths is carried out quite quickly and does not require special skills and knowledge. The designs look elegant and beautiful, emphasizing general form yard or garden and standing out noticeably, no matter what material you use, be it crushed gravel , pebbles, or granite screening.

Video selection of garden paths made of crushed stone

Or crushed is most often used in development landscape design for garden areas, paths, platforms, in decorating flower beds.

Almost any design ideas can be realized using this material.

How to make a path?

1. Peat is removed under the planned path - approximately 1-1.5 shovels. Next, geotextiles are laid (density - 120 g/m2) and crushed stone, gravel, and coarse sand are poured onto it. The mixture must be trampled and compacted. This can be done using hand roller, vibration platforms.
2. Next, you definitely need to make a border for the path - it protects the edges, soil and vegetation from washing away. You can use garden, strip, concrete borders or siding, wood slats, natural stone and even old linoleum. The curb should protrude at least 1 cm above the path.
3. At the next stage, the path needs to be sprinkled with sand, leveled with a rake and geotextiles laid on top; it should allow water to pass through well. Non-woven is suitable for these purposes. Pieces of geotextile are joined with an overlap of approximately 30 cm.
4. The next stage is filling with screenings. It is best to choose pink. It is beautiful and environmentally friendly. Red has more radioactivity, gray is not as aesthetically pleasing. The material is poured approximately 10 cm thick +-. Then you need to level the screenings with the back of the rake and compact them with a roller or tamper. You also need to water the path in order to wash off excess dust from it.

Our company offers to buy granite screenings with delivery throughout St. Petersburg and the Leningrad region on favorable terms. We deliver to the site using our own transport. Cooperating with us is convenient, profitable and economical!

Before filling the yard, you need to understand what you want to get as a result. As far as I understand you a private house, decor adjoining plot can be different, you can make a hard platform for a car (for example)

you can make a lawn with a lawn

can be arranged various shapes flower beds

Or you can combine all of the above

There are a lot of options, it all depends only on your imagination and capabilities.

Before you start registration local area, you need to sketch out a plan with the planned purpose of each section, and then for each section you can already choose your own coverage. If you have a lot of construction waste left after construction, you can do alpine slide, construction waste is excellent drainage and the basis for various flower beds various plants. For flat areas, you need to clear the place, level it and you can start decorating.

Parking for a car can be arranged different ways. You can install plastic gratings and make a lawn

Various paving slabs can be laid

To lay paving slabs, you need to remove upper layer soil, pour crushed stone (you can use construction waste), then add a layer of sand, then you can lay paving slabs using a level. You can invite specialists for this work; there are quite a lot of companies involved in landscaping.

I do not recommend covering the site with asphalt; on hot summer days it will melt, and its components, to put it mildly, are not entirely environmentally friendly. If on at this stage If you are not ready for such global work, you can simply level the area and fill it with sand or gravel; this will simplify landscaping work in the future; you will not need to dismantle complex coating options, such as, for example, pouring concrete or laying asphalt.