Houses made of SIP panels 50 sq. m. Small house made of SIP panels “Lesnoy. The turnkey warm circuit kit includes

Any changes in the project are possible at the request of the Customer

Farewell total area

The total (construction) area is calculated as the building area taking into account the number of floors.

Living space

It is calculated by summing the areas of all internal premises.

">

residential 60 m 2

Floors

Dimensions

7.5 x 8.5

width Length

Rooms

Chamber drying of timber

We use chamber-dried lumber, calibrated and antiseptic. We DO NOT use natural moisture timber.

PreCut technology

The house kit is manufactured using PreCut technology at the factory. We DO NOT cut panels at the Customer's site.

Non-flammable SIP panels

We DO NOT use combustion retardant materials. All our materials are self-extinguishing.

Eco-friendly materials

We use only environmentally friendly materials, namely: German expanded polystyrene KNAUF Term® and OSB-3 environmental class no lower than E-1 (the highest environmental class).

The Lesnoy project is a ready-made project for a one-story SIP house with a hipped roof. Porch area 5 m2. The house has a functional layout: in a small area it was possible to conveniently place a bedroom, a bathroom, a living room and a kitchen partially connected to it. At the entrance to the house there is a separate utility room where you can organize a storage system. From the living room you can access the outdoor terrace through French windows. The house is very bright, although it is oriented with windows on two sides. It looks very impressive due to its complex roof and protruding porch. This house has everything necessary for permanent or seasonal residence of a family of two.

Options for completing house kits and their costs

The cost of construction depends on the chosen option of cooperation with our company.
The main and perhaps the most important factor that determines the cost of a house kit using ECOPAN technology (SIP) is the complete set of the house kit and what is included in it.
It is the equipment that determines the cost.

Prices for turnkey SIP houses in our company start from RUB 4,500/m2

What kind of lumber (mounting board) for assembling a house kit is offered to you in the estimate, if natural humidity does not allow this to be done.
The lumber must be planed dry with a moisture content of 8-12%.

Floor panels at the 0.000 m mark (floor of the first floor), interfloor ceilings and roof must be made of panels 224 mm thick, reinforced
(Reinforced means that the pitch of the timber (log) should not exceed 620 mm, and not 1250 mm, as in wall panels.

Please note whether the price of the house kit includes the cost of lumber (boards, timber, supports, beams, etc.) required for installation
house kit. Many companies, when calculating the cost of a house kit, indicate only the cost of a set of panels without taking into account lumber - such
a “house kit” will naturally be 150,000 - 250,000 rubles cheaper, and this is the cost of lumber that they did not include in the estimate, without which you
You just can't assemble these panels.

Possible configuration options

Cost (rub/m2)

Support (basement beam)

Overlap at elevation 0.000 mm

External load-bearing walls

Internal load-bearing walls

Non-load-bearing partitions

Interfloor ceiling

Roof (roof panels)

Mounting beam (board) + Fastening elements

from 4500 rub./m2

150x200 mm.

174 mm

SIP panels "ECOPAN" - 174 mm (622x2800)

beam 50 x 200 mm, chamber drying

rafter set

included

This package is suitable for a customer who does not have enough material resources, but has the skills to independently carry out work on insulating the frame, rafter system, etc.

from 5500 rub./m2

150x200 mm.

150x200 mm SIP panels "ECOPAN" - 224 mm (622x2800)

SIP panels "ECOPAN" 174 mm

frame 50x150 mm, chamber drying

frame 50x100 mm, chamber drying

beam 50 x 200 mm, chamber drying Flooring on OSB-22 mm beams.

SIP panels "ECOPAN" 174 mm reinforced (622x2800)

included

This configuration option - with a closed warm circuit made of SIP panels, also requires further modification by the customer to install sound insulation of frame walls and beam floors.

from 6500 rub./m2

200x200 mm

SIP panels "ECOPAN" 224 mm reinforced (622 x 2800)

SIP panels "ECOPAN" 174 mm

SIP panels "ECOPAN" 174 mm

SIP panels "ECOPAN" 124 mm

SIP panels "ECOPAN" 224 mm reinforced (622x2800)

SIP EKOPAN panels 224 mm reinforced (622x2800)

included

This equipment fully complies with all the requirements and standards for SIP ECOPAN technology and does not require further work on insulation of the rafter system, beam floors and frame partitions.

Factory production and installation of a house kit + installation of a foundation on screw piles - from RUB 11,200. per sq.m. total area of ​​the house.

The cost of construction is calculated based on the following scope of work:

Factory production and installation of a house kit + Foundation installation:

Option 1: Pile foundation

• removal of the building to the area;
• screwing screw piles;
• installation of a wooden grillage;
• 
  (materials and types of work depend on the chosen option)

Option 2: Strip foundation

• vertical layout of the area;
• removal of the building to the area;
• arrangement of support platforms (piles);
• waterproofing the foundation and inter-foundation space
  (materials and types of work depend on the chosen option);
• blind area (concrete or paving slabs);
• porch (reinforced concrete, number of steps - according to the chosen
  project); finishing of the base. Finishing options are agreed with the Customer,
  and can be different: under a “fur coat”, wild stone, decorative tiles,
  basement siding, etc.

You can learn more about these types of work in the section.

It is possible to adapt an existing foundation for a wooden frame after assessing its quality by specialists from our company.

Cost of building a house before final finishing (without engineering systems)– from 14,800 rub. per sq.m (total area of ​​the house).

• Foundation construction;

COST 14,800 rubles. PER SQ.M
(TOTAL AREA OF THE HOUSE)

The cost of building a house before pre-finishing is from 18,000 rubles. per sq.m (based on the total area of ​​the house).

• Foundation construction;
• Factory production and installation of a house frame with insulation and sound insulation;

• Roofing – flexible tiles (other roofing materials are possible);
• Exterior wall decoration - Siding (any exterior decoration is possible);
• The interior finishing of the walls and ceiling is rough;
• Double-chamber plastic windows and a metal entrance door.

• Interfloor staircase – rough finish (pine material);
• Installation of communications: electrical distribution, water supply,
  sewerage without connection to external networks and installation of sanitary ware;
• Heating system wiring, aluminum panel radiators
  (or use of other equipment).
• When developing an individual project, the design is paid for.
  Cost of individual design, section AR:

COST UP TO 100 M 2 - 15,000 RUB;
OVER 100 M 2 - 180 RUB/M 2.
SECTION KD (design documentation -
included in the price of the house kit).

"Fine" finishing

The cost is determined depending on the scope of work and materials chosen by the Customer.

Additional services:

• Drilling a water well;
• Installation of biotreatment systems;
• Installation of air heating, air conditioning, ventilation and air purification systems;
• Installation of floor-standing boilers for solid and liquid fuels;
• Installation of heated floors;
• Fireplace installation;
• Installation of amplification for satellite dishes, split systems, solar panels, furniture, attachments, interior items, wiring for the Internet and satellite television;
• Installation of telephone and television wiring, security and fire alarms, as well as other types of work that require installation inside walls and partitions, increasing the cross-section of electrical wiring, the power of RCDs and circuit breakers;
• The availability of the listed works is agreed upon at the design stage. The procedure for payment and performance of work is determined in additional agreements to the contract.

Leave a request for an individual calculation

A small house made of vulture panels 6.5x9 meters, with a total area of ​​50 square meters. The house has all the necessary premises for a country holiday with the whole family: two bedrooms, a combined kitchen-living room, a bathroom and a large terrace for evening family conversations over hot tea. To view the characteristics of the house, click the “Properties” button at the top.

Available configuration options:

The Domokomplekt kit includes:

1. Load-bearing foundation beam;
2. Foundation (screw piles);
3. Windows with installation;
4. Drainage system;
5. Entrance doors.

The “Standard” kit includes:

1. Cut SIPs | SIP wall panels (enclosing and internal);
2. Cut SIPs | SIP floor panels (basement, interfloor);
3. Cut SIPs | Roofing SIP panels;
4. Working documentation for house assembly;
5. Load-bearing foundation beam;
6. Mounting structures (dry planed lumber);
7. Foundation (screw piles);
8. Assembly of the house kit at the customer’s site;
9. Windows with installation;
10. Covering the roof with metal tiles;
11. Finishing the facade with vinyl siding;
12. Hemming the roof eaves with soffits;
13. Drainage system;
14. Entrance doors.

The turnkey warm circuit kit includes:

1. Cut SIPs | SIP wall panels (enclosing and internal);
2. Cut SIPs | SIP floor panels (basement, interfloor);
3. Cut SIPs | Roofing SIP panels;
4. Working documentation for house assembly;
5. Load-bearing foundation beam;
6. Mounting structures (dry planed lumber);
7. Foundation (screw piles);
8. Assembly of the house kit at the customer’s site;
9. Windows with installation;
10. Covering the roof with metal tiles;
11. Finishing the facade with vinyl siding;
12. Hemming the roof eaves with soffits;
13. Drainage system;
14. Entrance doors.

IMPORTANT! The price of all packages does NOT include:

Preparation of the construction site, cutting down trees, the need to provide autonomous power supply, leveling the surface of the site, transportation costs. Works and materials are also not included: installation of sewerage, electrical, water supply, installation of a fireplace, boiler equipment, foundation blind area, all interior finishing and other types of work outside the foundation of the house.

Quality!

SIP panels are produced using innovative equipment that has no analogues in St. Petersburg and the Leningrad region. The structural insulation panel consists of two sheets of oriented strand board, which are equipped with an insulating layer of polystyrene foam. The connection occurs through gluing using a 20-ton pneumatic-hydraulic press. The durable and at the same time lightweight design perfectly retains heat inside the building, providing a comfortable temperature, regardless of the weather outside the window.

For the production of SIP panels, high-quality materials from the famous brands Kalevala, Glunz and KNAUF, Parkon PLUS are used. All offered products have the necessary certificates of conformity.

Manifold!

The Sipa Factory catalog contains numerous ready-made samples of residential buildings, which are promptly delivered to the client’s site.
Assembly and installation work is carried out by the best teams. Technical supervision is carried out by construction experts.
The client has the opportunity to be present at the site during the construction of the facility and observe the project with his own eyes.

Fast and accessible!

Well-established in-house production using modern equipment allows Sipa Factory to create prices that are acceptable to customers. A specialist’s visit to the site to formulate an estimate for future work is free of charge.

The cost of our properties is significantly lower than the regional market average.
Production is carried out in the shortest possible time due to the high productivity of the line. A well-coordinated team of professionals will quickly and affordably produce and build the home of your dreams!