House with internal garden projects. A house with a winter garden - a project with a greenhouse and an extension with a veranda. Design solutions for verandas and loggias - original interiors

House with internal garden projects.  A house with a winter garden - a project with a greenhouse and an extension with a veranda.  Design solutions for verandas and loggias - original interiors
House with internal garden projects. A house with a winter garden - a project with a greenhouse and an extension with a veranda. Design solutions for verandas and loggias - original interiors

Any architectural and construction project consists of three parts: architectural, design and engineering. This is a document without which the developer will not receive permission to begin construction.

The main part of the project is the architectural and design sections. If the customer is absolutely sure that the construction team will have intelligent specialists in engineering networks, then they can refuse to develop this part of the project in a specialized company. But it is necessary to understand that the architect, designer and engineer work on the project together and such aspects as, for example, grooves and openings in the walls for laying pipes and wires are provided for by them in advance.

The engineering part of the project is divided into several parts

  • Water supply and sewerage (WSC)
  1. water supply scheme
  2. sewerage diagram
  3. general view of the system.

Before starting design, it is necessary to decide what kind of communication will be - individual or connected to a centralized system.

Individual water supply provides complete independence from external conditions. But you must remember that you will need your own water sources, and drilling a well will cost a decent amount.

Connecting to a centralized system will require developing a project in accordance with the technical conditions of the existing network and obtaining permission to connect.

When connecting a sewerage system to a centralized system, the procedure is the same as when connecting a water supply: submitting a request to the relevant services, developing a project, obtaining permission to tap into the system. If you decide to organize an individual sewer system, then from time to time you will have to invite a sewer service.

  • Heating and ventilation (HVAC)
  1. heating diagram: calculation of the required equipment power, distribution diagrams of heating mains, location of pipes and radiators
  2. ventilation diagram: connection to power electrical equipment, ventilation communications and shafts, passage nodes and, if necessary, placement of stoves and fireplaces
  3. boiler piping (if necessary)
  4. general instructions and recommendations for the section.

If the ventilation system is always an individual design, then heating can be either individual (stove, air, water, electric) or connected to centralized networks.

  • Power supply (ETR)
  1. lighting wiring
  2. power network wiring
  3. ASU diagram
  4. grounding system
  5. detailed description and characteristics of all system elements.

Electrical systems can be divided into mandatory and optional. Mandatory items include interior and exterior lighting, ventilation, air conditioning and electric heating systems. Additional systems include systems such as “Warm floor” or automated gate control.

IMPORTANT

  • Each part of the engineering section of the project must contain general and technical descriptions, specifications of materials and necessary equipment.
  • Drawings of elements of all systems and floor electrical wiring are made on a scale of 1:100.

Price: from 300 rub. per m²

Package "Utility networks"

Package "Utility networks"

The engineering network project will allow you to correctly lay communications and make the house truly comfortable and modern.

  • Price: from 300 rub. per m²

Making changes to the project

Often the customer is faced with the question: choose a standard house project and save money, while losing on the originality of the future home, or order an individual project, but for a lot of money.

Our company offers a compromise option. You order a standard project, and we make changes to it, taking into account all your wishes as much as possible. Of course, this involves additional costs, but, in any case, such a project will cost much less than work for a specific order. And we will make sure that your home looks original.

The following changes can be made to the house design:

move wall partitions. But only if they are not load-bearing. This operation will allow you to change the size and purpose of the rooms

moving window and door openings will allow you to change the lighting of the rooms and organize convenient access to the rooms you need

changing the type of ceilings and walls will allow you to fully realize your own ideas about economical and rational housing

change the height of the ceilings. Although all our houses are designed with an optimal room height of 2.8 m, some customers believe that high ceilings provide additional coziness and comfort

Converting an attic into a living space will give you the opportunity to expand your own living space

It is worth changing the angle of inclination of the roof and awnings taking into account the climatic conditions of a particular region

it is necessary to change the type of foundation, taking into account the engineering and geological parameters of the soil. It is also possible to add or change a basement or ground floor

you can add, remove, change a garage or terrace, in accordance with your ideas about the functionality of your home

changing the structural composition, building and finishing materials will allow you to economically manage your own financial resources

the project in a mirror image will allow the house to organically fit into the surrounding landscape.

The changes made should not affect the safety of the home.

Too many changes usually do not improve the project. If you couldn’t choose a suitable house from the catalogs, then maybe it’s worth ordering housing from an architect based on an individual project.

Price: from 2000 rub.

Making changes to the project

Making changes to the project

A house built according to a standard design can look original

  • Price: from 2,000 rub.

BIMx model

We keep up with the times and today we offer you the opportunity to receive, along with project documentation BIMx model - based on technology that provides simultaneous navigation through 2D documentation and 3D building models.

Now you can “twist, walk around inside, see your future Home from all sides” View all sizes and heights, opening specifications, etc. You will receive a file that will be your reliable, convenient assistant for monitoring construction.

*You receive the file electronically and use it using the BIMX application on Apple and Android mobile devices

The BIMX application is available for free in Play Market, App store

BiMx demo

BIMx model

BIMx model

BIMx model - interactive viewing of a three-dimensional model of your home. Now you can “twist, walk around inside, see your future Home from all sides”

  • Price 10,500 rub.

Package "Foundation adaptation"

When a standard house design is developed, certain average soil parameters are taken as a basis. But without accurate geological examination data, it is difficult to take into account all the nuances when designing. Therefore, often the engineering and geological characteristics of a real site differ significantly from those originally included in the project. This means that the foundation - the basis of the entire house - will need to be modified to make it strong and reliable.

To completely eliminate all problems when laying the foundation, our company’s specialists have developed the “Foundation Adaptation” package. When implementing the package, not only technical characteristics are taken into account, but also the wishes of the customer.

This package includes:

  • selection of foundation type
  • calculation of technical parameters:

Depth of laying the base of the foundation
- load bearing capacity
- indicators of soil stress under the foundation
- cross-sectional area of ​​working reinforcement, etc.

  • detailed drawings of the zero cycle
  • cost sheet for construction materials.

Adaptation of the foundation provides a complete guarantee of its strength, and therefore the reliability of the entire building. You are guaranteed to get rid of problems such as shrinkage and cracks during the operation of a finished house. Moreover, often the adapted foundation turns out to be cheaper than the option originally included in the project. And this will help save materials and financial resources.

Price: 14,000 rub.

Package "Foundation adaptation"

Package "Foundation adaptation"

Preparation of a foundation project for a specific site

  • Price 14,000 rub.

Individual design

If you decide to build a house, then you have your own idea of ​​what your dream home should be like. And if none of the standard projects suits you, it makes sense to think about an individual project. In addition, all your wishes will be taken into account as much as possible: level of comfort, family composition, even the view from the window. It is clear that such a project will not be cheap. But you will know for sure that there is no other like it.
Sometimes, however, you have to resort to individual design. For example, a developer received a plot of land with a non-standard configuration, and not a single standard project simply fits into it. And it also happens that the number of changes made by the customer is such that it is easier and cheaper to design a house from scratch.

Stages of working on an individual project:

  • development of technical specifications for house design
  • contract for design work
  • preparation of a preliminary design: linking the building to the area, external and internal views, layouts, sections
  • detailed study of project sections.

In addition, you can also order:

  • projects for additional structures - garage, workshop, bathhouse, etc.
  • visualization of the project in 3D format.

Ultimately, the customer receives a package of design documentation consisting of architectural and structural sections.

The project features:

  • General plan of the house linking it to the boundaries of the site.
  • Floor plans, which indicate the thickness of walls, lintels and partitions, room areas, specifications of windows and doorways.
  • Facade plans indicating finishing materials and color schemes.
  • Sections of the building and main components.
  • Drawings and sections of the foundation, material consumption sheet.
  • Calculation of the ceiling, roof truss system, insulation and waterproofing components of the roof.

You can decide on the style of your future home in the “Individual Design” catalog.

Price: from 450 rub. /

Individual design

Individual design

Realize your individuality with a custom project!

  • Price: from 450 rub. / m²

Package "Tender proposal"

For any developer, the question from the funny nursery rhyme “what should we build a house...?” far from idle. Moreover, the cost of building a house depends on many factors. Therefore, you should not estimate costs by eye. Without complete information, it will not be possible to calculate everything down to the smallest detail and, in the end, it will cost you more. And, in addition, a careful calculation of the cost of materials and work affects not only your finances, but also the time frame for building a house.

You can accurately calculate construction costs by using the “Tender Offer” service developed by our specialists. Essentially, this is a document that provides a complete list of all construction materials and work, indicating their volumes.

Having a tender offer allows you to:

  • get a real picture of the costs of upcoming construction
  • attract a construction company that can offer the most favorable conditions for the work
  • not only understand the essence of the construction process, but also competently control the consumption of building materials, independently adjusting prices for each item
  • competently control the actions of contractors at all stages of construction

a tender proposal supported by information on the cost of materials and construction work is a serious argument for obtaining credit funds from the bank.

Package "Tender proposal"

Request a detailed estimate. Build for your own benefit!

  • Price 10,500 rub.

Anti-ice package

Snowdrifts and ice on the roof of your house in winter cause a lot of trouble. You can, of course, climb onto the roof and swing a shovel in the cold for 2-3 hours - no matter what. But effective snow melting and anti-icing systems have long been invented and widely used. Their basis is heating cables. The system is organized according to the same principle as a “warm floor”. Only more powerful and the cable laying step is smaller.

The Anti-Ice package is developed taking into account the characteristics of the home's energy supply:

for the roof and gutters: snow melting in gutters, at the edge of the roof to prevent the formation of icicles and ice in pipes

for the entrance group: heated steps, paths and open areas

for the entrance to the garage: heated driveways

in addition, sometimes the Anti-Ice system is used to heat the soil in greenhouses, and for landscape heating of flower beds, lawns and lawns, as well as for heating sports facilities.

During the design process, the minimum energy consumption is calculated and fire safety is ensured. When creating an Anti-Ice system, it is recommended to use only certified self-heating elements that do not support combustion. In addition, the system is equipped with an overheat shutdown device or a differential circuit breaker to automatically shut down the system when energy loss is detected. If the system turns out to be too large, it is divided into smaller sections. This makes it easier to manage its work.

Important:

For a multi-pitched roof, the specialists of our company will design the Anti-Ice system according to individual orders.

Price: 4500 rub.

Anti-ice package

Anti-ice package

Your comfort and safety in winter

  • Price 4,500 rub.

Package "Lightning protection"

Often, developers do not attach much importance to protecting their own houses from lightning: some save, some count, others hope for chance. But 3-4 years after building a house, many people remember lightning protection. Maybe my neighbor’s household appliances burned out in a thunderstorm, or maybe I came across statistics on how many fires happen per year due to lightning.

We propose to resolve the issue immediately: to provide protection already at the design stage of the house. It’s worth thinking about this, at least for purely aesthetic reasons - you won’t need to once again hammer into the walls of the house and pull the down conductor along the facade, disrupting the thoughtful appearance of the building.

Lightning protection for a home is a system of devices located both outside and indoors. External lightning protection prevents lightning from entering the house, while internal protection protects the electrical network from sudden power surges. And special devices protect electrical equipment from sudden changes in the electromagnetic field within the radius of a lightning strike.

The Lightning Protection package includes

  • layout diagram of lightning rods that absorb direct lightning strikes
  • cross-sectional diagram of a down conductor diverting current from the lightning rod to grounding
  • diagram of a grounding loop that distributes lightning energy in the soil, ensuring complete safety
  • averaged resistance calculations
  • detailed list of required materials
  • recommendations for project implementation.

The Lightning Protection package from Dom4M guarantees your home safety even in the most severe thunderstorm.

Package "Lightning protection"

Package "Lightning protection"

Lightning protection: think about safety in advance

  • Price 3,100 rub.

Package "Central vacuum cleaner"

"Central vacuum cleaner" is a type of aspiration system(removal of small particles by sucking them in with an air flow).

The system consists of:

  • vacuum cleaner(installed in the technical room);
  • air duct system along which the dust-air mass moves (hidden installation is often carried out in the preparation of the floor or in the space behind the suspended ceiling);
  • pneumosockets and pneumatic scoops(the first is connected to a flexible hose with a telescopic rod and a nozzle, as in a regular vacuum cleaner, the second is intended for express cleaning, usually in the kitchen).

Pros:

  • removable dusty no air gets in back into the room, and is “thrown out” after the unit onto the street;
  • No noise in cleaned areas.
  • Ease of cleaning without “dragging” the vacuum cleaner from room to room, without using extension cords.
  • Hidden installation system, there is nothing in the room except an air outlet.

Project price: from 3100 rub.

Package "Central vacuum cleaner"

Package "Central vacuum cleaner"

An integral part of a modern home is comfort, cleanliness and fresh air.

  • Project price: from 3,100 rubles.

Package "Comfortable Home"

Explanatory dictionaries claim that comfort is a set of household amenities, without which life is unthinkable
modern man in a modern home. Most of these amenities are included at the design stage. But we are ready to expand their list and help clients make their own homes as comfortable as possible.

Therefore, our company Dom4m has developed for you the “Comfortable Home” package, which will make your home cooler on a hot summer day, and cozy and warm on winter colds.

The Comfortable Home package includes

  • Warm floor project. This is a modern technology for heating a home. It can be used by connecting to both a local and centralized heating system. In addition, heated floors can be both the main and additional source of heat in the room. The main advantage of the system is that it creates a uniform thermal regime, does not dry out the air, and at the same time fits organically into any interior.
  • Design of a ventilation system with recovery. Unlike traditional systems, ventilation with recovery makes it possible to save significant money during operation. The essence of the system is that the exhaust air, passing through the recuperator, gives up its heat to the cold flow coming from the street. Everything ingenious is simple. This system allows you to significantly reduce heating costs. Savings reach up to 80%. And, in addition, the load on the network is reduced. In the summer, using a ventilation system with recovery, you can cool warm air from the street. And here you already get savings from reducing energy consumption when air conditioning your home.
  • Air conditioning system design. This project offers you the choice of a ducted air conditioner with distribution of air flows throughout the rooms or a multi-split system, which allows you to connect several indoor units to an external unit at once.

It's nice to relax among flowering plants when the weather outside is cold. The project of a house with a winter garden is a building with a warm green oasis, which serves to restore mental balance and physical condition. If it contains additional equipment for SPA, it is a complete complex for relaxation.

Modern building project with a winter garden and veranda

According to statistics, only a third of country houses are maintained in the project. More often it is attached later, to the finished building. When a house is built, many people have the idea of ​​equipping an evergreen corner. In addition to allowing you to immerse yourself in summer during the cold winter, a garden is a natural protection for your home from the cold.
There are two types of such projects:


Construction of a winter garden in a country house
  • integrated winter garden, included in the design plan;
  • the second type is attached to the house.

An integrated garden is a single ensemble with a building. Part of its walls and roof are glazed and acts as a greenhouse. The extension can be of different shapes: in the form of a bay window, a semicircle; adjacent to one or two walls of the house; angular. They differ in height (at least 2.5 m), area (at least 15–20 sq. m.), and materials.


Drawing with dimensions of a greenhouse for a home

By purpose there are:


The frame is made of reinforced aluminum profile, laminated veneer lumber or regular hardwood timber. Depending on the style of the house, windows made of PVC profiles or wooden ones are installed.

Watch the video review of the house project with a winter garden.

Winter garden style

It is better to entrust the creation of a plant ecosystem to a specialist. This is a rather complicated process. Landscape designers will help you draw up a detailed map of plants and soils. They will select an irrigation system and lighting. Depending on whether the plants will be planted in tubs or soil, it is necessary.


Interior design of a large insulated winter garden

The winter garden is decorated in different styles:


Creating a winter garden with your own hands is an interesting activity, but it requires careful preparation.

A patio, or outdoor courtyard near a living space, can have different shapes and sizes. You can equip it by surrounding it on different sides with walls or fences, latticework or galleries, as well as a hedge of trees and shrubs.

A patio or outdoor courtyard near a living space can have different shapes and sizes

Before building a courtyard or patio on a country plot, it is necessary to draw up and calculate the project. Specialists and designers can offer to implement not only beautiful, but also original designs of such buildings, which are located both in front of the house and inside the household made of timber and stone. Professional design engineers most often use the option of comprehensive landscaping with the construction of the following types of patios:

  • inside a four-walled courtyard, with fencing and gates;
  • with one wall and decorative fencing;
  • in the shape of a glass bulb in a house with a flat roof;
  • corner type, adjacent to one of the walls of the house;
  • with a fireplace wall for cooking over an open fire;
  • with an artificial pond and decorations.

To obtain a complete and modern landscape design with proper arrangement of the patio, you can also take a closer look at ready-made projects or develop an individual landscaping plan.

How to make a patio at your dacha (video)

Types of patio seating areas

There are several types of arrangement of patio areas in the local area, but the most popular are corner buildings, courtyards at the back wall of the household, balcony and multi-level accommodation, as well as a solarium patio and a romantic patio with a barbecue area.

Gazebo-patio for relaxing in the country

Traditional construction with a roof made of strong and durable materials that can protect from the sun and precipitation. Most often, the roof is made of translucent polycarbonate, and the walls are made of lattice, which allows climbing perennials and annual flowering crops to be planted around the perimeter.

Romantic patio in the courtyard of a country house

Mediterranean style decoration is extremely popular. If you decide to create a relaxation area with your own hands for romantic meetings and evenings for two, then it is best to choose a place in the most remote corner of the garden, where you can have privacy, and also create the most attractive design against the backdrop of greenery and flowers. The site being performed can be either open or closed with dense vegetation, decorative fences, or a fabric canopy.


Romantic patio in the courtyard of a country house

Projects of houses combined with a patio area

The need to combine home ownership with a recreation area requires the development of a special project. In this case, it is advisable to give preference to the most popular trends, including an open layout and a combination of kitchen and dining room. The home can have a traditional pitched roof or a flat roof.

The second option allows you to use the roof surface as a green terrace. In terms of planning, houses with a traditional pitched roof are most often built around a courtyard. In this case, a comfortable living room combined with a kitchen should be equipped with panoramic windows and access to a covered patio.


The need to combine home ownership with a recreation area requires the development of a special project

Patio with barbecue for meeting friends

When choosing a place in the country to create a recreation area with a barbecue, several of the most important nuances must be taken into account. According to fire safety rules, no tree branches or bushes should hang over the site being created. To decorate such an area, potted crops, artificial ponds or decorative fountains can be used.

It is advisable to locate the site in close proximity to the household, which will allow for the supply of an electrical network and a water supply system. The traditional rectangular shape of the site is allowing you to conveniently place pieces of furniture and the grill itself, but round or oval areas with a barbecue look very impressive for relaxing with a large company or family.


Patio with barbecue for meeting friends

Multi-level patio

The original version of a multi-level patio is optimally suited for arrangement in areas with a shortage of free space. Among other things, it is precisely such recreation areas that are most relevant if the owner of a country property plans to use this element of garden design not only for entertainment and relaxation, but also for other purposes. With a whimsical appearance, a multi-level patio option, which includes several types of cut floors, is perfect for decorating in modern styles.

Patio Ideas (video)

Choosing furniture for a relaxation area in the garden

A properly executed patio includes several traditional elements, represented by small areas for recreation, an area for household needs, an artificial reservoir in the form of a pool or pond with a fountain, a drainage system, landscaped areas in the form of lawns or flower beds, as well as collections of plants.

The main elements must be carried out in the same style; this will emphasize the entire isolation of the recreation area being equipped, therefore special attention is paid to the correct choice of furniture. First you need to decide whether the furniture will be outdoors throughout the year or removed indoors with the onset of winter. Outdoor furniture has different purposes, therefore, it is advisable to purchase entire sets, including sun loungers, chairs or armchairs, benches and tables.

It should be remembered that furniture made of cast iron or stone is incredibly beautiful, but most often it is stationary, so for a small patio, it is advisable to purchase lighter furniture made of plastic, bamboo, cane or rattan.

Gallery: patio at the dacha (video)



































How to make a wooden patio at your dacha with your own hands

Wood is a natural, environmentally friendly and comfortable material for spending time, which is quite affordable for purchase and easy to work with. It is for these reasons that many owners of country real estate are increasingly giving preference to wooden buildings in the recreation area.

Choosing and preparing a place for a patio

To begin work on the construction of the patio, you will need to mark the area in accordance with the project. Recreation areas with wooden floors look great, and a light floor board allows you to visually enlarge the area. There are several ways to lay a wooden floor:

  • the use of hardwood, including ash and oak, which are most resistant to negative street influences;
  • fixation of modern decking boards or decking, most often represented by a combination of wood and plastic derivatives, which makes it possible to take advantage of the specific resistance of polymers to external factors.

Laying of construction and finishing materials is carried out on wooden or metal logs installed on a previously cleaned and marked surface.


Many country property owners increasingly prefer wooden buildings in recreation areas

Construction of the main structure

An above-ground structure for relaxation can be made in the form of a spacious area, lined with traditional wooden boards, and equipped with several sections with areas for placing a fireplace, a seating area with furniture and a decorative artificial pond. To protect personal space from prying eyes, walls are erected, which can have very different heights - from a few centimeters to a couple of meters.

Steps, walls and arches of the patio, as a rule, are made of the same building and finishing materials that were used for cladding the home. In this way, it is possible to show a smooth transition from the building to the patio for relaxation. If a barbecue area is being set up in the area, then in this case only non-flammable and fire-resistant materials are used, which should not only be resistant to fire, but also durable. If the site fencing is made in the form of a lattice, then it is allowed to decorate the walls with climbing vegetation.


An above-ground structure for recreation can be made in the form of a spacious platform covered with traditional wooden boards

Making an Inexpensive Patio Cover

If you need to build an inexpensive canopy, first of all, you need to decide on the choice of its design. This design can be done:

  • in the form of a gazebo;
  • in the form of a terrace;
  • in the form of a visor;
  • in the form of an imitation porch.

The canopy structure can be attached or free-standing. The materials for constructing a canopy can be:

  • tree;
  • profiled flooring;
  • sheet polycarbonate;
  • plexiglass;
  • colored euroslate;
  • metal tiles;
  • thick fabric.

Particularly popular are decorative canopies, which are optimal for decoration and serve as an original addition to the overall style of all country buildings.

When constructing a structure yourself, it is very important to consider the following basic rules:

  • the canopy is made with a minimum slope of 5-10%, which will not allow snow and water to accumulate on the surface;
  • when arranging a place to relax, you need to count on two square meters per person;
  • The optimal dimensions for arranging a patio with a barbecue are 4x6 m.

The support can be made of concrete, wood or metal. Depending on the design features, the canopy over the seating area can be:

  • direct, the easiest to manufacture and well protected from direct sunlight;
  • inclined, single-slope and gable type, preventing the accumulation of water and snow on the surface;
  • complex, arched, dome, polygonal and pyramidal shapes based on flexible materials, including profiled sheets and polycarbonate.

Particularly popular are decorative canopies, which are optimal for decoration and serve as an original addition to the overall style of all country buildings. Any decorative canopy, if desired, can perform enclosing and protective functions.


The canopy is made with a minimum slope of 5-10%, which will not allow snow and water to accumulate on the surface

Fencing and landscaping of the recreation area

The flora planted in the recreation area should be represented by vegetation that will easily create an unobtrusive and relaxing atmosphere of well-being and complete tranquility. It is very undesirable to use for landscaping purposes too bright and very colorful, fragrant flowers that secrete a large amount of nectar. Such vegetation tends to attract pollinating insects, including various flies, midges, bumblebees and bees, which can interfere with outdoor recreation. Low-growing conifers will complement the design of the constructed recreation area in a very original and harmonious way.

How to arrange a patio area (video)

Patio area lighting

In the process of decorating the constructed site, it is necessary to resolve the issue of supplying electricity, but the installed lamps must create a calm, matte lighting that does not dazzle the eyes. The appearance of the lamps can be in the same style as the overall design of the patio or, on the contrary, it should create a bright and original accent on certain areas of the alternative living room. Lighting along the edge of a covered or open area, carried out along the entire perimeter, allows you to emphasize the shape of the patio, and also provides complete security, being a very practical lighting system.

Attention, TODAY only!

    What was done

    Project: the Innsbruck project was adapted to the site and the wishes of the Customer's family, and a solution was proposed to move the terrace.
    foundation: based on geology and the architect’s calculations, the house was built on a pile-grill foundation.
    ceilings: basement - reinforced concrete monolithic; interfloor - reinforced concrete floor slabs.
    box: walls made of aerated concrete blocks, masonry with masonry glue. Windows are made to order, with one-sided lamination, installation on site.
    roof: metal tiles.
    external finishing: the walls are insulated with basalt facade insulation and plastered, finishing elements are made of wood, manufactured locally, based on technical specifications visualization, painted. The base is lined with decorative stone.
    interior finishing: finishing was carried out according to the design project, where the combination of decorative plaster with stone and wood was taken as the basis. False beams were installed on the ceilings.
    additionally: a fireplace has been installed and finished.

    What was done

    This is the very case when our Customer and we speak the same language and are inspired by the ECO high-tech style! Designer Ilya came to us with a ready-made Project for his future home! Our team liked the project - after all, such unusual and stylish solutions are always a professional challenge!
    We prepared estimates for Ilya and developed unique design solutions - all this allowed us to implement this project! The frame house is made using our proven Canadian technology with 200 mm insulation along the entire contour! The outside of the house is sheathed with imitation timber. All windows are custom-made and laminated in colors according to the project. Additional accents are placed thanks to professional painting of imitation timber and selection of paints.

    What was done

    What does it cost us to build a house? Indeed, having a team of professionals and knowledge, building a house from scratch is a matter of time! But sometimes the task is more difficult! We have introductory ones - an existing foundation, or buildings on the site, extensions to existing buildings and much more! For the Matsuev family, this was precisely the difficult task. They had a foundation from an old burnt house, and a landscaped area around it! The new house had to be built in a short time on the existing foundation. Dmitry and his family had a desire to build a new house in the high-tech style. After careful measurements, a design was made that took into account the old layout, but had a new modern form with interesting innovations! The house now has an entrance area where you can sit at a table on cozy evenings and a complex but possible exploitable roof in our area. To implement such a roof, we called upon our knowledge and modern building materials, LVL beams, fused roofing and much more. Now in the summer you can have an unusual dinner on such a roof or watch the stars at night! In the decoration, our architect also emphasized the minimalistic and graphic high-tech style. Smooth plastered walls with painted plank details, and wooden beams at the entrance added personality. The inside of the house is decorated with imitation timber, which is painted in different colors depending on the purpose of the room! Large windows in the living room kitchen overlooking the site created the desired effect of illumination and airiness of the space! The house of the Matsuev family has graced our photo gallery in the section of country architecture in the high-tech style, a style chosen by brave Customers with excellent taste.

    What was done

    Olga and her family have long dreamed of a country house! A reliable, solid home for living that will fit perfectly into their difficult narrow plot! With the advent of children, it was decided to make the dream come true; children grow up quickly and in their own home in nature there are many opportunities and fresh air. We, in turn, were glad to work on an individual project for a house in a classic style made of red brick with a bay window! After the first acquaintance with our company in a cozy office, we invited Olga to take a look at our existing construction site: evaluate the order and construction processes, storage of materials on site, get acquainted with the construction team, and make sure the quality of the work. After visiting the site, Olga decided to work with us! And we were glad to do our favorite job again to make another country dream come true!

    What was done

    Project: changes were made to the San Rafael project and redevelopment was done according to the wishes of the Customer.
    floors: basement - reinforced concrete floor slabs; interfloor - reinforced concrete floor slabs
    box: walls made of expanded clay concrete blocks, masonry with mortar??? Windows have been installed.
    roof: metal tile
    terrace: rough enclosing elements have been completed, flooring has been installed.

    What was done

    Dmitry contacted our company with an interesting preliminary design to calculate the cost. Our experience allows us to perform such calculations based on preliminary designs with minimal errors, no more than 2%. Having visited our construction sites and received the cost of construction, Dmitry chose us from many of our colleagues in the workshop to complete the project. Our team began to carry out a complex and expressive country project with spacious premises and a garage, large windows and complex architecture. After the project was completed, Dmitry chose us as a contractor company, and we, in turn, wanted to do further work at the same high level! Since the object is large, Dmitry proposed stage-by-stage cooperation, namely, upon successful completion of the foundation work, we began the second part of the project - walls + floors + roofing. Also, the exact timing of construction was important for Dmitry; in order to speed up the construction processes, the team was reinforced by 2 experienced masons.
    The box on a pile-grillage foundation was delivered right on time! The result pleased us and the Customer. All stages of the work were coordinated and worked out for Dmitry and his individual project, which benefited all participants in the process!

    What was done

    Project: The project of our company Inkerman was changed taking into account the wishes of the Customer’s family, the house was planted on the site, taking into account the existing situation on the site and the relief
    foundation: based on geology and the architect’s calculations, the house was built on a reinforced pile-grillage foundation.
    ceilings: wooden on wooden beams, in places of large spans installation of LVL beams. The basement floor is insulated with 200mm basalt insulation; interfloor ceiling with 150mm sound insulation.
    box: box: walls made of expanded clay concrete blocks, masonry with mortar. Windows have been installed.
    roofing: installation of metal tiles.
    external finishing: the facade is insulated with 100 mm basalt facade slabs, the facades are covered with facing bricks; the color scheme was proposed by the architect and agreed with the Customer.

    What was done

    The Krutov family decided to build a spacious house for the whole family to live in!
    Olga and other family members went from idea to implementation in several stages! Choosing a technology, working on a project for a long time, building a foundation, building a house with exterior finishing and then working on interior decoration! Frame technology was chosen as energy-saving, prefabricated and high-tech! Why did the Krutovs choose our company? They were pleased with the quality of work on our construction site and the workers who gave us a detailed tour! We also spent a long time working on the estimate, combining different finishing options and comparing their costs. This made it possible to choose the best option from a wide variety of finishing materials and configurations.
    The project was created by an architect friend, but we had to work out the constructive part of it. After which the most reliable and effective foundation was erected - USHP. Next, work began on the box. A frame house with 200 mm insulation along the entire contour and a unique roof insulation technology of 300 mm. For the exterior decoration, siding was chosen in a spectacular combination of colors - coffee and cream. Accents are placed thanks to powerful roof overhangs, an interfloor belt and large windows!

    What was done

    When you decide to become the happy owner of your own home and move to a new home for permanent residence, first of all you think about what the house will be like; what to build it from; how much will it cost and most importantly, WHO will do all this?
    Alexander came to our company with the desire to move to his own country house. He liked the Avignon project and there was already a strip foundation on the site. After the initial visit to the site, measurements and inspection of the foundation, we gave our conclusions and recommendations. Strengthen the foundation, change the project and adapt it to the size of the existing foundation! After agreeing on the cost, it was decided to build in winter. Alexander received a gift of reinforced concrete floors, one of the leading construction teams and a house according to the design he liked, which stood on a plot with exterior finishing by spring! Alexander observed every stage of construction, regularly visiting the construction site and was pleased with the result, and we were pleased with our work. This is an individually designed Avignon project, implemented in stone technology with external insulation and siding finishing!

    What was done

    Each house is a separate story of creation and implementation! One day we built a house for good people and they recommended us to another good person! Andrey Rumyantsev came to our company with the desire to build a one-story spacious country house with a fireplace for warm family evenings on the site of an old country house... It was decided to build the house from aerated concrete blocks so that the future handsome country man would delight the owner for decades! The customer voiced his wishes for finishing - and we, in turn, brought everything to life. Thanks to detailed visualization of the project, each element of the exterior decoration is a member of a friendly ensemble! Bavarian masonry, as the final stage of exterior decoration, looks noble and thorough. Without a doubt, such a tandem - aerated concrete and brick - can easily be called the best solution in the field of stone housing construction - warm, affordable, beautiful, reliable. Modern technologies have advanced so much that such unique configurations become available in a short time, because we built this project over the winter months. The main thing is to have the necessary knowledge and constantly replenish it!

    What was done

    Project: the project of a European company was taken as a basis and was adapted to the site and the wishes of the Customer’s family; a terrace and patio were proposed, taking into account the cardinal directions on the Customer’s site.
    foundation: based on geology and the architect’s calculations, the house was built on a pile-and-grid foundation.
    ceilings: basement - reinforced concrete monolithic; interfloor - wooden on beams with a 150 mm sound insulation device.
    box: walls made of aerated concrete blocks, masonry with masonry glue. Windows are made to order with one-sided lamination, installation on site.
    roof: metal tiles.
    Exterior finishing: the walls are insulated with basalt facade insulation and plastered. Based on the visualization, facade panels under the Tolento stone were added. The enclosing elements of the terrace and balcony are made of wood, made locally, based on technical specifications visualization, and painted. The roof overhangs are lined with soffits matching the color of the roof.

    Vladimir Murashkin,

    Owner of a house “individual 8x9m”

    House parameters:

    What was done

    When Customers come to us with bright, modern ideas for their future home, we become doubly excited! After all, working on a new stylish project is always interesting and a challenge, how to implement all the bold ideas from a constructive point of view, what materials to use? Vladimir bought a plot of land with picturesque views of the Oka bank! This view could not be ignored, so a dizzying terrace (51.1 m2) and a large balcony, oriented towards beauty, became an indispensable attribute of the future house! Vladimir wanted to relax in nature in a wooden house, but it was necessary to build a house in a short time, and frame construction technology became the ideal solution for such problems! If we’re going to be different, it’s in everything! The house was made even more spectacular by the vertical finishing of imitation timber made of durable larch, painted in natural shades with emphasized wood texture. Laminated windows complement the modern look of the house! It turned out to be an excellent country house, with highlights and at the same time incredibly functional.