Designer flowerpots. Concrete outdoor flowerpots: how to make, install and care for them. Small flowerpots made from sticks

Vases, or flower pots of different sizes, are classified as small architectural forms. The materials from which they are made can be very different: ceramics, gypsum, wood, concrete.

Which material should you prefer?

Master class on making outdoor flowerpots with your own hands

Conclusion

Photo gallery: outdoor flowerpots

Elite options are also available for sale - marble and natural stone. Forms with planted plants are installed directly in the open air: on terraces, in courtyards. Outdoor flowerpots differ from indoor flowerpots in size and location: they are not for indoor spaces. Such flowerpots on the territory of a theater, restaurant, bank, near an administrative building, as well as in a garden and park area will not only decorate the street, but will also present the plants in a favorable light.

using large flowerpots to decorate an alley

It should be noted that garden flowerpots should be one with the dacha area, so you can safely choose a specimen with strict geometric shapes, with unusual, extravagant and even flashy notes. Let's say right away that small flowerpots are not suitable for large areas, they look ridiculous; and vice versa: if you want to use large flowerpots in a small area, then this should be done in exceptional cases and very carefully.

using outdoor flowerpots you can decorate a recreation area

Now about fashion in colors. Flowerpot landscape fashion also dictates its own rules. Here it is worth sticking to the basics: the “colorfulness” of the pot should be no brighter than the plant itself planted in it; otherwise, the plant will be “lost” against its background. In general, it is better to take plain garden flowerpots: then these will highlight the plant and emphasize the style. The main and win-win shades are white, terracotta, brown, gray.

using flowerpots to decorate entrance doors

Advantages of outdoor flowerpots

The advantages of using flowerpots are:

Glowing flowerpots act as lanterns in the garden at night

flowers in flowerpots will decorate any corner of the dacha

“Despite the high cost of flowerpots made of natural stone, they have become onefrom trends andthe highlight of landscape design"

The taste and color comrade... yes. Everything will depend on your preferences, your pocket and, of course, on the variety of materials from which the flowerpots are “sculpted”. Judge for yourself:

homemade flowerpot made of metal sheet is strong and durable

using a metal sheet to create a stationary flowerpot

The solution will easily take the shapes you want for flowerpots and will set quickly. They prefer to make outdoor flowerpots from this material (the big plus is their weight) and install them in places with high traffic. They last a long time, the price is affordable. Many gardeners are satisfied with concrete flowerpots, including those they made with their own hands.

plastic flowerpots with special openings for installation on a fence

You can try it too.

a little imagination and artistic skills and an original flowerpot made of plastic bottles will decorate your summer cottage

The fact that from any material (be it wood or concrete) you can make such flowerpots for the garden that there will be no limit to admiration has already been mentioned in passing above. Let's look at this in more detail.

Master class on making outdoor flowerpots with your own hands

An old bucket can be given a second life by converting it into a flowerpot

How to make a flowerpot from cut down trees or a stump

Some believe that a stump is a waste material and is an unnecessary part of a dead tree. They are half right, since it is the stump that can become that very precious “highlight” of the landscape, since its potential is still quite high. Take note: it makes a beautiful container for plants. How to do it? Birch is good for processing.

outdoor flowerpots made of stumps and logs will become the highlight of the landscape at the dacha

To work you will need a chisel, a drill, and then the course of your actions is as follows:

1. drill holes on the surface of the stump (try to place them close to each other; the ease of further processing of the tree depends on this);
2. remove the wood from the inside with a chisel (hollow it out until it is determined that the future flowerpot is deep enough);
3. fill the container with soil (but it is better if you place the soil in a separate pot, as discussed above);
4. treat the tree with a protective solution (in case water gets past the pot).

The simplest version of a flowerpot is a wooden flowerpot

wicker baskets will create a romantic atmosphere in the garden

“Armed with a hacksaw and a hammer, you can make beautiful garden flowerpots for the garden of any configuration and shape from wood”

Wood is actually considered a unique material because it is easy to process. Armed with a hacksaw and a hammer, you can use it to make beautiful garden flowerpots for the garden of any configuration and shape. This is not difficult to do. Here is the order of your actions:

1. If it's a board.

Conventional shield technology and classics: you take individual planks and knock them together. Since the flowerpot will be outdoors, it is not worth making it small. The products will come out in a rectangular geometric shape. Having made 4 shields, they are connected. The result is a narrowed downward or rectangular (it’s up to you to decide) box. You can make a garden flowerpot of an even more complex design, but then you will have to study the technology of their manufacture.

DIY wooden flowerpots

Often wood is used only as a frame for a pot, which is an old, out-of-use bucket (it is “lined” with wood so that it is not visible that it is a bucket). The shape of the cladding can also be different: rectangular, hexagonal and even round.

1. From timber.

The design of an outdoor planter is created according to the principle of assembling a log cabin. Having cut the bars of the required size, made a cut half the thickness of the beam on both sides, you can assemble a flowerpot, like a designer, using self-tapping screws and nails. The final stage of work will be sanding and coating the wood with stain. That's it, the flowerpot is ready.

Natural stone

original flowerpots made of stone in the form of baskets

Flowerpots are made from sandstone, onyx, travertine - rocks that are similar in quality to marble. Despite the uniformity (as it seems at first glance), you cannot find two identical patterns on stone, applied by nature itself. Therefore, know: your flowerpot will be unique if you purchase them in stores or order them. To save money, you can make such flowerpots yourself.

The manufacturing technology is as follows:

• Application of stone and mortar.

This technology for making outdoor flowerpots from natural stone is the simplest and cheapest, although the material (for example, flagstone or sandstone) will have to be purchased. By cutting the slabs into pieces of the shape you need, using glue designed to work with tiles, you can create even the most wonderful product configuration.

Using stone and glue you can make a unique flowerpot of various shapes

• Gabions.

This is the name of a container of various configurations made of durable metal mesh, which is filled with stones. The main advantage of this manufacturing method is the absence of cement. On the contrary, even though the main working material is mesh, it does not spoil the aesthetic side at all. The main thing is to give the mesh the correct shape and choose the type of stone with which you will fill the frame.

A few words about the gabion mesh. Suitable from stainless steel, well-bending, rigid but movable weaving with rectangular cells. You can also use galvanized steel, but its disadvantage is that over time it will become covered with rust. Don’t take the chain-link either, it’s tough.

gabions do not at all spoil the aesthetic appearance of the garden landscape design

To assemble a gabion, formwork is prepared from the mesh, only it is filled not with concrete as usual, but with stone. To save money, you can fill the middle of the gabion with crushed stone.

Ask what stone is suitable for a gabion? The answer is: stones of poorly weathered, water-resistant rocks, the dimensions of which are significantly larger than the size of the cells. Quarry stone, cobblestone, rubble or chip are suitable here. Fertile soil is poured between the stones.

gabion on a summer cottage

To achieve an even greater effect, the stones are laid like a mosaic (if you entrust the production of the gabion to specialists, they can lay out the stone, even specifying a specific pattern). If you are laying the stone yourself, prepare several types of stone. Mix them up and they will look great too.

Want to make natural stone glow? Treat it with luminescent paints. So during the day it will be an ordinary flowerpot made of natural stone, and at night it will be illuminated.

Concrete flowerpots

a composition of concrete blocks that act as flowerpots will become a bright accent of landscape design

You already know what concrete is and what its advantages are. All that remains is the most important thing: to understand the stages of creating such a pot. For work, prepare the necessary materials and tools:

• cement;
• 2 vessels of different sizes;
• spray;
• water;
• vegetable oil.

Do everything in order, namely:

• treat both containers with oil: from the inside ─ the larger one and the smaller one ─ from the outside;
• cut the plastic tube into 4 pieces 5 cm long (for drainage);
• prepare a solution, add dye (in a 3X2 ratio of sand and cement, as well as water);
• .fill a large container with cement mortar, spreading it in a 2 cm layer;
• insert the tubes and wait until the solution sets;
• place a small container in a large one, fill the gap between them with the remaining solution;
• After 24 hours, remove the inner vessel and sprinkle the cement with water.
• The future flowerpot should be kept in a large container for about a week;
• shake the pot out of the mold, add soil;
• plant a plant.

Tires for flowerpots

three-tier flower bed made of tires

This is a quick, but quite original way to “sculpt” flower pots. You will have to work with a jigsaw and knife, marking the boundaries with a pencil. Depending on what the flowerpots made from tires will be, their size is selected. Everything is done in order:

1. We make markings.

A cut is made with a knife ─ between the thicker rubber and the softer one. The metal cord located inside the tire serves as a natural boundary up to which the cut will be made. An ornament is applied around the circle of the tire, according to which the rubber will be cut.

marking

1. Making cuts.

Using a sharpened knife or using a jigsaw, cut the tire to a depth of 5-10 cm. The width of the ornament is at least 10 cm.

making cuts according to markings

1. Turning out the cuts.

Turn out the cuts. You need to start turning the tire from the center, at an angle of 25°.

eversion

1. Decoration.

After completing the previous steps, the tire will take on the appearance of a flowerpot. All cut areas can take any shape. All that remains is to paint the tire, fill it with soil, and place agrotextile material on the bottom.

car tires are the most common item for creating flowerpots from scrap materials

Vases made from plastic bottles

The most economical option, however, will have to tinker, since a 2-liter bottle is unstable, but it should become a stationary, full-fledged flowerpot; it will be put out on the street.

The order of your actions:

• cut off the top of the bottle;
• where you intend to place the finished product, dig in reinforcement;
• cut off the bottom, retreating 20 cm from the bottom (the cut bottom part will serve as the bottom of the flowerpot);
• a hole the size of a bottle neck is drilled in the bottom;
• paint the entire surface (use water-based paint);
• after it dries, the structure is assembled (put a neck on the reinforcement, then “put” the so-called “skirt” from the bottom on it);
• fill the flowerpot with soil and plant flowers.

Unnecessary things are also useful!

great idea: using old shoes as pots to decorate a wooden fence

There are so many of them, things that have fallen into disrepair and are stored in the garage in case: you never know! This case came up in time. Jugs, bowls, buckets, vinyl records, old shoes can provide a service for the improvement of your garden plot, namely:

• Hold the vinyl record over the fire, and when it becomes flexible, you can shape it into whatever shape you want. Use tile adhesive to attach the decor: pebbles, pieces of glass, shells.
• A pot, bowl, jug, or mug painted in the color you like and decorated can serve as a flowerpot for your favorite plant.
• A table from a non-working typewriter or a plywood box will look like an antique flowerpot, and paint in black, golden, or silver shades will help you with this.

using old kitchen utensils as planters

Conclusion

You can make the most of your garden space, create new flower arrangements using any material (from exquisite to the simplest and even unnecessary) without making much effort. Using the above recommendations, you will be able to create a real outdoor masterpiece, whose name is a flowerpot.

Photo gallery: outdoor flowerpots

A personal plot is the calling card of everyone who lives in their own home. In addition, this is an area where you can rest, relax, and receive aesthetic pleasure from a neat and well-groomed landscaped area. Flowers and shrubs add special beauty to any yard. They can be planted directly into the soil in the traditional way, or you can get creative and make flowerpots. In all the best modern courtyards, these decorative items are given a significant place, because they make the exterior richer, more interesting and comfortable. In our article we will tell you how to make a flowerpot with your own hands for your summer cottage or garden plot.

It turns out that an outdoor flowerpot can be made from anything you can get your hands on. Especially in this case, old items that you have not used in everyday life for a long time are suitable because they have lost their attractive appearance or have become inoperable.

We offer you the following ideas for creating a flowerpot for the yard:

• If you have old kitchen utensils in your attic or pantry that you still can’t recycle, then just restore them a little and you’ll get an original flowerpot. For example, you can use an old metal kettle with a burnt bottom or dents. And if you find several of these teapots, you can decorate an entire flower area with the following flowerpots:

• Flowerpots made from old rubber boots look very original. They can be painted, painted, attached to a fence, or simply lined up. Here, give free rein to your fantasy and imagination, and it will tell you exactly how to arrange the boots so that they look elegant:

• If you find beautiful tree trunk stumps in the forest, you can take them to make a flowerpot out of them. It will look very harmonious with the vegetation on your site:

• If you have wire mesh and a bunch of old rocks, combine these materials to make a decorative planter. It looks, of course, quite eccentric, but if you like everything large-scale and eye-catching, then you will like this option:

• If you still have old plastic barrels or canisters, then you can cut off their tops, paint the outside and put several in a row, so that, for example, you can highlight a path at the entrance to a gate:

Give your old things new life! At the same time, you will not have to spend money on purchasing a special flowerpot in the store, and besides, you will create absolutely unique decorative items that no one else will have.

How to make outdoor flowerpots with your own hands from concrete

A flowerpot made of concrete is a beautiful product with an unusual design that serves as a special container for growing sensitive outdoor plants, adding uniqueness and beauty to your yard landscape. You've probably seen concrete flowerpots in the courtyards of expensive houses. Of course, if they have an elaborate shape that only professional sculptors can make, then such a flowerpot will cost a lot of money. But you don’t have to reinvent the wheel and make a simple version of a concrete flowerpot that will look stylish and modern.

To make a concrete flowerpot for your garden plot, you need to follow these instructions:

• First the concrete is mixed. It consists of several components - you can see their name and approximate ratio in the picture below:

• After this, you need to prepare a container that you will fill with concrete, and a bend that you will place inside the container to make a spacious flowerpot. You can use an old basin, bucket, plastic container as a container, and stones or sand in large quantities as oppression.

• If you want to decorate your concrete flowerpot in some other way, you can use additional broken glass, shells, pebbles, coins and other decorative elements. Just don’t forget that decor is not always appropriate. The flowerpot must correspond to the stylistic idea of ​​your garden, besides, you can spend a lot of time on the made flowerpots, and then its decor will not be visible at all behind the flowers or greenery. For clarity, we will give you this example of a concrete flowerpot:

• When you find the container that will be the basis of your future flowerpot, you will need to wrap it inside with cling film. This is necessary so that later the container can easily come away from the concrete. The same will need to be done with the second container into which you will pour the oppression.

Keep in mind that the film rarely lies evenly along the walls of the container into which concrete is poured. There will definitely be errors, but they can be corrected with decor.

• The concrete is poured very carefully and gradually. First you need to fill the bottom of the container so that the height of the bottom is 4 cm. It is advisable to level the bottom immediately with a spatula, because then you will no longer be able to do this.
• After this, drainage is done. For drainage, you can use a metal tube cut into small strips. All these elements also need to be treated with some kind of lubricant.
• When the drainage is ready, you can install a container with pressure on top. Sand always works great as oppression.

• After this, the rest of the concrete is poured between the containers. Please note that bubbles may form. To prevent this from happening, be sure to insert metal rods into the concrete you pour.
• Align all edges with a spatula, and then wrap the future flowerpot in plastic. Leave the pot in this form for a day so that the concrete hardens well.
• After a day, all elements of the containers must be removed from the structure, and the flowerpot itself must be painted and decorated.

Important! If you still want to decorate your flowerpot, do it before it is completely dry so that the decorative elements stick to the concrete surface of your flowerpot.

How to make flowerpots from cement and fabric

Flowerpots made of concrete and fabric look very beautiful. It turns out to be a real work of art.

Of course, to make such a flowerpot as shown in the picture, you will have to work hard:

• First you need to mix the concrete solution so that it is not too thick. In this case, it should be more liquid, because in this liquid you will soak the fabric of your choice. We recommend using an old towel because it will give the pot a unique texture when it dries.
• After you dip the towel into the solution, make sure that it is completely saturated with the concrete solution.
• Remove the fabric from the solution and hang it on an upside down bucket. Immediately straighten the edges of the towel and leave the future flowerpot to dry for as long as needed (much also depends on weather conditions).
• Turn the finished flowerpot over, place it in the desired location and paint if desired. In their natural color, such concrete structures look quite nice.

How to make a flowerpot from wood

To make such a beautiful and very organic flowerpot for any exterior, you need to do this:

• First, find some stump that has already dried well so that it is convenient for you to work with it. Decide on the size of the future flowerpot and cut exactly the length of the stump that you need.

• Along the entire perimeter of the hemp you need to drill holes, which should be located very close to each other. This is necessary so that you can then use a chisel to knock out the depth of the flowerpot you need.

• Once you have achieved the desired depth, place some kind of plastic container inside the wood. This is necessary in order to protect the wood from moisture. If you don’t have a suitable container, simply treat the wood with stain.

• After this, pour soil into the tree and plant the plant in a flowerpot.

How to make a flowerpot from a tire

• On the side of the tire, make the pattern you want to cut. You can cut it with an ordinary knife, but you will first need to dip it in a soapy solution, which will make the knife cut better. If you want the edges of the pattern to also be embossed, then it is better to cut them with a jigsaw.

• Next comes the hardest part - turning the tire so that it resembles an open flower. It is physically difficult because the rubber is very dense. After you manage to cope with this step, sand the surface of the tire so that the future flowerpot has a beautiful appearance.

• We make the basis for a flowerpot from a tire rim - we connect the elements and it turns out that the frame of the flowerpot is completely ready. You just need to paint it and plant flowers:

How to make a mold for a flowerpot

It’s enough to simply make a mold for a flowerpot out of plaster. It will turn out to be light, in addition, you can give the plaster flowerpot any structure. Of course, it will be very fragile, so you will have to handle it very carefully so that nothing heavy falls on it. It is ideal to install such flowerpots in flower beds or gardens, where there is the lowest probability that something can damage them.

We tell you how to make this form:

• Take any rectangular cardboard box. It will need to be sanded on all sides. The plaster will adhere better to the treated surface.
• Make a gypsum solution of such a consistency that it resembles sour cream. You need to put pieces of gauze or a regular bandage into it. Wrap the box with this bandage.
• After this, leave the pot for a while so that the plaster hardens. All irregularities that will form can be removed using the same sandpaper.
• We paint the finished flowerpot with acrylic, and when it dries, we cover everything with enamel on top.
• The finishing layer is a varnish that will give the flowerpot shine and beauty. By the way, a plaster flowerpot can also be decorated with pebbles, shells and other tinsel. Although they look quite interesting without it.

How to make a large tiered flowerpot, ideas with photos

Multi-tiered flowerpots look very nice. They can also be made from scrap materials or construction materials. We invite you to consider several original options for your dacha or personal plot:

• If you have building blocks, you can arrange them beautifully so that they resemble a wall with flower pots. The pot will look like this:

• If you have old metal buckets that you can’t find a use for, you can also make a multi-tiered flowerpot out of them by connecting the buckets together to form a large flowerbed:

• The simplest way, which is very common everywhere, is to make a multi-tiered flowerpot from car tires. They just need to be stacked in layers in a checkerboard pattern, and then painted. In our opinion, such a flowerpot is the optimal solution for a summer residence:

Beautiful flowerpots with your own hands, step by step with photos

At the end of our article, we will present you with a few more instructions on how to make a beautiful flowerpot with your own hands:

Option #1

1. Take an old barrel, treat it on all sides with an antiseptic so that it does not rot.
2. Strengthen the future flowerpot with additional metal hoops throughout the entire barrel.
3. Attach a wooden foundation to the bottom, which should match the circumference of the barrel itself.
4. Make several holes in the bottom for good drainage.
5. Decorate the barrel - you can make a couple in love like the one shown in the photo.
6. Place soil inside and plant the plant.

Option No. 2

This version of the flowerpot is suitable only for those who have basic carpentry skills:

1. Prepare a flat wooden surface that will serve as the bottom. Immediately make holes in it for drainage.
2. Then cut as many pieces of wood as possible and lay them out to create the structure as shown in the photo. Although you can not complicate it this way, but simply make a rectangular wooden flowerpot.
3. Fasten the bars together with self-tapping screws.
4. Treat the surface of the flowerpot with sandpaper, and then saturate the wood with a special antiseptic that will protect it from rotting.
5. All that remains is to fill the pot with soil and plant the plant.

As you can see, you can add beauty to your garden or yard without making any large financial expenditures. All you have to do is show your ingenuity and a little creativity, and you will have an incredible piece of jewelry that you can admire every day.

Video: “How to make outdoor flowerpots”

Most garden plots still have the flavor of Soviet vegetable gardens for planting vegetables. But over time, this tradition gives way to cultural country estates for relaxation from everyday life and the big city. When creating a beautiful landscape design at your dacha, you cannot do without outdoor flowerpots or hanging flowerpots with flowering plants. With their help, a special atmosphere of sophisticated style is created, harmoniously combined with nature. In this article we will look at which flowers to choose and plant in outdoor flowerpots.

The benefits of planting flowers in outdoor flowerpots

• Flowers in pots retain their popularity due to their portability. During the season, they can be rearranged around the site, decorating either the entrance group or the recreation area.
• As a rule, plants for outdoor flowerpots are chosen that bloom profusely throughout the season. Therefore, they are great for decorating concrete or asphalt driveways.
• Hanging flowers for hanging flowerpots will add unique sophistication to an open veranda or decorate the handrails of the steps of the front entrance to the house.

• There is also a practical side to this method of growing flowers in the country. Plants planted in closed, tall flowerpots are less susceptible to attack by pests and diseases. In addition, there is no need to weed.
• By properly preparing the soil for plants, you can grow even complex and whimsical flowers in flowerpots that would not be able to survive in open ground.
• With the onset of autumn cold weather, the beauty of flowers can be extended by bringing them into the house.

Features of planting flowers in outdoor flowerpots

• The soil for flowerpots must be selected in accordance with the requirements of the plants that will be planted in them. Most often, fertile purchased soil is used for this.
• Due to the small volume of the pot, the soil in it dries out very quickly, so it is recommended to add hydrogel to the soil.
• The flowerpot must have drainage holes to drain excess moisture to prevent rotting of the flower roots. The only exceptions are openwork metal pots with inserts made of coconut substrate or straw.
• A drainage layer of at least 3-4 cm is required. It is made from expanded clay, small crushed stone or any other material.
• After planting flowers in a flowerpot, mulch the surface of the soil from drying out. Coniferous bark, peat or small pebbles are used as mulch.

Low-growing flowers for a flowerpot at the dacha

Zinnia

• Zinnia is a heat-loving plant that should be planted exclusively in sunny areas.
• It can only be kept in outdoor flowerpots during the warmest summer months, as even slight frosts can destroy it.
• For lush flowering in a flowerpot with limited volume, you need to properly prepare the soil. Zinnia prefers fertile soil rich in organic fertilizers. Acidic or alkaline soils are not suitable for it.
• Zinnia is quite picky about watering. She cannot tolerate drought, but too much watering is detrimental to her. That is why it is necessary to organize a drainage layer in the flowerpot and regularly water the plant.
• For longer flowering, faded inflorescences are immediately removed.
• If the soil is rich in nutrients, fertilizing is not necessary.

Phlox subulate

This is a low-growing phlox whose peak flowering occurs in spring.

• In outdoor flowerpots it creates a dense flowering carpet. The flowerpot with it will not need to be brought into a warm room for the winter; it will overwinter just fine outside.
• After winter it needs to be cut, but not completely, but only the dried shoots.
• The awl-shaped phlox should be planted in a sunny place; it does not require fertile soil.
• If flowering is sparse, you should not immediately feed the plant; it can further worsen the condition of the phlox subulate. The reason may be either poor lighting in the area or too dense soil.

Aubrieta

• This is a ground cover plant with deep purple flowers. It is highly frost-resistant and is not afraid of the first frosts.
• To grow aubrieta in a flowerpot, choose a sunny place.
• It feels great on neutral and light soils, but on acidic clay soils it will only “survive”.
• For planting it, it is especially important to equip a good drainage layer, otherwise the roots will quickly rot.
• Fertilizing too frequently will affect the active growth of green mass, but flowering will become more sparse.
• During the summer, it is advisable to mulch the soil three times with sand, the layer of which is 4-5 cm. But you need to apply mineral fertilizers only in spring and autumn.
• After spring flowering, it is recommended to prune the plant (leaving small stumps). This will allow the aubrieta to bloom again in the fall. Therefore, it is advisable to place it in group plantings.

Heliotrope

Although this flower is quite demanding to care for, it does not lose its popularity thanks to its delicious vanilla aroma. It requires a lot of sun and heat, which is why it is quite difficult to grow it in northern latitudes.

• For central Russia, heliotrope is excellent for growing in small flowerpots, which are taken outside only in the warmest months.
• It should be planted in a sunny place. The soil must be fertile.
• The soil should not be allowed to dry out, but it is also not advisable to over-moisten it. But heliotrope responds well to morning and evening spraying.
• It is also recommended to apply mineral or organic fertilizers for abundant flowering.

Lavender

This is a low and unpretentious plant with a fragrant smell. Annual varieties are suitable for growing in outdoor flowerpots.

• Lavender requires regular watering. During the dry season, it is necessary to water twice a day - morning and evening.
• The plant needs pruning after each flowering.
• The color of lavender flowers is very diverse and depends on the variety. The timing when lavender blooms also varies. For example, narrow-leaved lavender has a flowering peak in early to mid-summer, while the Spanish variety begins to bloom in the spring.
• Plants can be planted in outdoor pots only when the threat of return frosts has passed. The height of the flowerpot should not exceed 40 cm.
• Before planting, you need to prepare the seedling itself (if it has an open root system). First, it is soaked in water for an hour, after which all excess roots are removed and the plant itself is pruned.
• In a flowerpot, seedlings should be located at a distance of 30 cm from each other (for low-growing varieties).
• For lavender, the soil chosen is alkaline sandy loam with a good drainage layer. Fertile soils are not recommended for use.

Pansy (viola)

An undemanding plant with beautiful flowers. It is thanks to this that the viola gained wide popularity. This crop can be either annual or biennial. When growing pansies in the northern regions of Russia in flowerpots, it is preferable to opt for annual varieties.

• But in any case, in order to achieve abundant flowering in the first spring, they need to be planted exclusively as seedlings, planting the seeds at the end of February.
• When growing viola in a flowerpot, you will need to water it regularly, as it does not tolerate drought well.
• Pansies will bloom abundantly when fertilized with complex mineral fertilizers.
• Dead leaves and flowers should be removed promptly. This is important not only for decorative purposes, but will also extend the flowering period.
• It is important to provide drainage in the flowerpots, otherwise the viola will begin to rot.

Marigold

• Low-growing varieties of marigolds are best suited for outdoor flowerpots.
• The greatest decorative effect is achieved when grown in a sunny place, since in partial shade the abundance of flowering is significantly reduced.
• You can plant them outside only after the threat of frost has passed.
• Frequent watering is unfavorable, as it leads to rotting of the inflorescences. But the plant is drought-resistant and undemanding to care.
• Marigolds respond well to feeding with mineral or organic fertilizers.
• Flowering is long - from June to October. To increase flowering time, faded flowers should be cut off regularly.
• In the fall, marigolds can be brought into the house, where they will delight with flowering for some time.
• They are highly resistant to various diseases and pests, so no spraying is required.
• A characteristic feature of marigolds is their pronounced odor, which has bactericidal properties. In addition, it repels pests from the site, so it is often recommended for preventive control of aphids.

Geranium (pelargonium)

Geranium has been a favorite house flower for many years, but in open ground it will show all its splendor.

• This light-loving plant can thrive in partial shade. Growing it in a flowerpot will require regular but light watering and fertilization.
• It is also important to ensure good drainage in the pot and remove any wilted flowers.
• To increase the splendor of flowering, you can apply the following fertilizing:
  • Dissolve 1 drop of iodine in 1 liter of water and mix well. The resulting weak solution is watered not on the plants themselves, but on the walls of the flowerpot so that the roots gradually absorb the fertilizer. It is important to water moderately so as not to burn or kill the geranium. Therefore, a medium-sized pot will require only 60 ml.
• When planting homemade geraniums in an outdoor flowerpot, you do not need to be afraid of changes in the color of the foliage. It becomes more pink - this is the norm.
• In autumn, at a temperature of +3 degrees, pelargonium should be pruned, transplanted into small pots, and left to overwinter at a temperature of 10 degrees.

Improper care and consequences

• With insufficient watering, the edges of the leaves begin to dry out.
• With excessive watering, the leaves begin to rot and become limp.
• When there is insufficient light, the stem of the geranium becomes bare, shedding its leaves.

Ageratum

This low-growing flower with blue fluffy flowers has a pleasant aroma. Therefore, it is especially successful to place flowerpots with it near recreation areas.

• Aregatum has a long flowering period, which is why it is also called ageless or long-flowering. Despite the fact that there are a huge number of different varieties, the Houston variety is the most popular in Russia.
• This herbaceous plant, up to 20 cm high, is a perennial, but is grown in flowerpots as an annual. It can also be trimmed regularly.
• The flowering period is very long - from late spring until frost.
• It will require a sunny place and regular watering. With a lack of moisture, Houston's aregatum will slow down its growth.
• Mineral fertilizers are used as fertilizing. Fresh manure is not suitable for these purposes. And you can’t overdo it with other organics. Since this will lead to the development of a powerful bush, but will negatively affect flowering.
• In a flowerpot it will look great in a composition with low-growing marigolds.

Balsams

Annual varieties of balsams are best suited for growing in outdoor flowerpots. They will delight you with flowering from early summer until late autumn.

• They thrive in sunny areas and can tolerate short periods of drought. But they will also feel good in partial shade under the canopy of trees.
• It is best to plant indoor balsams in outdoor flowerpots in July, which will allow for less painful acclimatization. But with the threat of the first frost, they again need to be removed to a room with a temperature of at least 15-16 degrees.
• To plant them in outdoor pots, you need to create a drainage layer and add compost to the soil. Mulch the planted plant.
• To increase the bushiness of the plant, the tops of the shoots are pinched off. Impatiens do not need to remove wilted inflorescences.
• It is a moisture-loving plant, and on hot days it requires regular but moderate watering. At air temperatures above 22 degrees, it is advisable to spray daily.
• Fertilizing balsam with complex fertilizers should be carried out at least once a month. It is recommended to apply them in liquid form, watering the plants in a circle, but without flooding the root collar.
• During flowering, do not feed with nitrogen fertilizers.

Ampelous flowers

Begonia ampelous

Ampelous begonia with long hanging stems will look great in outdoor flowerpots on a high stem or in hanging flowerpots. This is a plant with powerful shoots, densely strewn with foliage and small flowers.

• She is pleased with the demanding lighting. So, in the shade its shoots become bare and it stops blooming, and in direct sun it can get burned. Therefore, you need to choose a place for it in partial shade.
• Frosts are detrimental to ampelous begonia, so you can plant it in an outdoor flowerpot only when the threat of repeated frosts has passed. In central Russia, this is not earlier than June 7-8.
• The flowerpot must have good drainage, since waterlogging leads to rotting of the roots.
• The soil for begonias must be fertile and contain organic matter (humus). It also requires adding nitrophoska and superphosphate.
• For the winter, pruning is done (a couple of the strongest shoots are left) and the plant is brought into a room with a low positive temperature.

Lobelia

Some varieties of lobelia feel great in outdoor flowerpots and in pots on the veranda. The most popular ground cover is Lobelia erinus. Depending on the conditions and care, it can have a spherical shape or droop like an hanging plant.

• Lobelia blooms from June to autumn. At the same time, it is a rather unpretentious plant that feels great both in illuminated areas and in the shade.
• Flowers in flowerpots are planted in small bunches at a distance of 10 cm from each other.
• All care consists of regular watering (especially during dry periods). And in the application of mineral fertilizers.

Equal leaf bell

This is a profusely flowering hanging plant. You can prolong flowering throughout the warm season by promptly removing faded inflorescences.

• When growing an equal-leaved bellflower in a small outdoor pot, you must annually remove the spring growth, which is about 35-40 cm. This will allow you to maintain the compact size of the plant.

Tip: for an equal-leaved bell, the diameter of the flowerpot or pot should not exceed 30 cm.

• Despite the fact that this is a light-loving plant, it will do better in partial shade or shade during the hottest afternoon hours.
• In autumn, the equal-leaved bellflower should be brought into the house already at a temperature of +10°C.
• Water frequently, but do not over-water it. Fertilizers are applied in liquid form once every two weeks.

Nasturtium

This popular flower is found in almost every garden. It is great for growing in an outdoor pot.

• It is quite unpretentious in care and has a long flowering period. The first inflorescences appear a couple of months after planting the seeds, and the last ones fade only with the first autumn frosts.
• Fertile and well-drained soil is suitable for nasturtium. It should be placed in the sun, but it will also do well in partial shade.
• It is advisable to fertilize with nitrophoska twice a season.

Fuchsia ampelous

• To grow ampel fuchsia you will need fertile and loose soil with a drainage layer. The best option is open flowerpots with coconut substrate.
• Fuchsia is fed at the end of March with any complex fertilizers for blooming flowers.
• It is best to place it under the roof of the veranda, as it does not tolerate direct sunlight.
• In autumn, fuchsia should be severely pruned and the flowerpot with it should be brought into a room where the air temperature will be approximately 10 °C. Additionally, it is recommended to fill the boxes with sawdust.

Ampelous petunia

Ampelous petunias grow faster than representatives of other types of varieties. They are distinguished by a wide variety of colors and abundant flowering. It is because of this that they are a bright accent of the garden, terrace or entrance area.

• Ampelous petunias grown in outdoor flowerpots can easily withstand minor frosts.
• But for beautiful flowering, petunia should be planted exclusively in sunny areas. In shade or partial shade, green mass actively grows to the detriment of inflorescences.
• Ampelous petunia in outdoor flowerpots responds well to regular potassium fertilizing. Also likes moisture, but not excessive watering. It is best to apply fertilizer in liquid form.
• Unfortunately, petunia is susceptible to fungal diseases, therefore, as a preventive measure, all wilted inflorescences should be removed immediately.

In private houses or near high-rise buildings, residents come up with a variety of decors for decorating flower beds.

Whatever is at hand is suitable for flower beds: tires, various plastic bottles and much more. Any resident can also build unusual figures. Let's consider what you can use to make a beautiful flower garden yourself?

Rubber flowerpots

The most accessible material is rubber; it’s easy to decorate a bowl made from old tires, so you won’t even think that it’s a former tire.

With a creative approach, any housewife can create a work of art from unnecessary things. Flowers are planted in such a rubber structure at the beginning of spring; you can change plants throughout the summer season so that the flower garden always delights the annuals with bright colors.

Important! Imported tires are much more elastic, so they can be shaped more easily.

Options for flowerpots for site decoration

To ensure that your garden (site) is always filled with flowers, you can use a variety of outdoor pots; they can be placed in any place. Even annual plants will grow well in improvised pots.

You can use concrete, metal, wood, plastic or clay as materials for flowerpots. But everyone has their own differences:

Clay is very plastic, soft texture, it is easy to create various shapes with it. After firing, the color is terracotta, the eco-friendly material “breathes” well, and the roots in such a flowerpot will not rot. Gladioli and other plants will grow well.

The stone is incredibly durable, products made from it will last a long time, and they retain moisture in the soil well. The external aesthetics are also undeniable. If you have the skills, you can make stone flowerpots with your own hands; the top can be coated with varnish for beauty.

Advice! To enhance the protection of stone (concrete) flowerpots, it is better to treat them with an antiseptic.

Wood is always available in abundance in the country, but the disadvantage is that it is not resistant to high humidity. You can eliminate this problem with a special impregnation, and then varnish the container. Flowers that love moisture are planted in wooden products.

Metal is an interesting material, but the products heat up easily. They do not need to be placed on sunny lawns; they need good watering so that the plants in them do not die.

Concrete for outdoor flowerpots perfectly retains the necessary moisture, and they will not heat up. But such flower beds are very heavy and are suitable only for large areas.

Plastic can often be found at dachas in different decors. If the flowerpots are made of plastic, they are lightweight, but they should be brought indoors when it is raining or cold.

Usually they decorate the paths on the sides, near the gazebos; you can place flowerpots on the steps of the stairs or on the sides on the ground.

Vinyl records can also be used, giving them original shapes. Unnecessary samovars, teapots, shoes, cabinet boxes, plastic bottles and other details become unusual decor along the paths, mark out areas for flower beds, or themselves serve as a flower bed for many plants.

Choosing flowers for flowerpots

To make bright flowers delight you all summer, for example, in concrete flowerpots, it is better to choose 2-3 varieties of flowers so that they “get along” with each other. This is a dwarf ursinia and a beautiful gazan.

To make the flower beds beautiful, tall flowers (pelargonium, etc.) are planted in the center, and low ones at the edges, this will create voluminous compositions. A semi-double aster in the center of a flowerpot will bloom for a long time; it has lush greenery, which is important for the beauty of the flowerbed.

Important! For flowerpots, it is better to choose flowers 15-50 cm tall.

Sun-loving plants are planted in the south of the site; dahlias are excellent neighbors for any plants. Their numerous colors will decorate the porch and any part of the garden.

For the base of dahlias or asters that are tall, you need to choose ageratum in white, purple or lilac shades. If you need red or blue colors, then limnanthes are beautiful.

If you need to decorate paths, then violets are suitable.

Using your creativity, you can create unusual flowerpots to decorate your garden.

Photos of street flowerpots on the site

The local area, as well as the dacha and garden plots, are constantly in need of landscaping and landscaping. To do this, you can place outdoor flowerpots with plants planted in them in various places - with their help you can successfully place accents in the form of bright inclusions from flower arrangements, giving a harmonious look to the local area.

Currently, decorative mini-flower beds that harmoniously fit into landscape design are very popular. When planting and growing plants in outdoor flowerpots, you can select the appropriate soil composition separately for each group of plants, as well as optimal conditions - depending on the needs, flowerpots can be placed in well-lit or shaded places. They make simple and complex, stationary and portable outdoor flowerpots, on struts, as well as hanging ones - the material, shape, color and texture of such products should be selected taking into account the general style of landscape design of the area in which you plan to place it, taking into account the principles of combination .

Stationary decorative flowerpots look good as accents along paths and paths, on terraces, near the porch of a house. Using hanging outdoor flowerpots, you can decorate gazebos, garden pergolas, and also decorate walls. In addition, when placed among plants planted in open ground, flowerpots with flowers will look quite harmonious, complementing and decorating the overall picture. For permanent placement in the garden, stationary options with various decorative compositions that will decorate the landscape for a long time are suitable. Small portable flowerpots with flowering plants - so-called mobile flowerbeds - can be freely moved to a suitable location, and can be easily replaced if necessary.

When choosing flowerpots, it is necessary to compare their size with the scale of the site - on a long alley, small pots will simply get lost, and in a small summer cottage, large containers may not fit in, as they will look bulky and disrupt the harmony of the space. A pot of the right size will fit organically into the landscape, not stand out too much (located in plain sight, but not in the spotlight) and act as a suitable frame for the various plants planted in it. Flowerpots are often placed along the edges of stairs, garden paths and alleys. In addition, they can be placed on any part of the plant composition, including in the central part.

As for colors, products of plain white, beige, terracotta and brown tones are widely used, as well as delicate pastel shades - they successfully set off lush greenery and flowering plants. You should not select flowerpots of too bright colors, as they will draw attention from the flower arrangement to themselves.

Materials for making outdoor flowerpots

For the manufacture of these products, both natural and artificial materials can be used - stone, clay, metal, as well as plastic and concrete.

Depending on the material of manufacture, outdoor flowerpots differ in the following characteristics:

• clay - due to the high plasticity of this material, it is possible to make flowerpots of various shapes and textures. Burnt clay (terracotta) is a natural material characterized by high porosity - therefore, the root system of plants in a flowerpot is actively enriched with oxygen through the soil. If the product is coated with a special glaze, then it loses its porosity;
• stone - outdoor flowerpots made of this material are piece products on which various three-dimensional ornaments can be carved. The process of making them is quite labor-intensive, so stone flowerpots are quite expensive. Their advantages include high decorativeness, strength and durability. In addition, the stone is moisture-proof and retains moisture well in the soil of the flowerpot;
• wooden - such flowerpots are made of natural wood impregnated with an antiseptic and will organically fit into any landscape design. These products can be varnished and painted. Wooden flowerpots retain moisture well and are therefore suitable for moisture-loving plants;
• metal - on sale are solid monumental products made of cast iron or forged brass flowerpots, as well as steel and zinc containers of clear geometric shapes in a minimalist style. These materials are susceptible to corrosion, so they are usually painted. In addition, metal flowerpots heat up quickly, so they should not be left for a long time under the scorching sun without watering, otherwise the roots of the plants planted in them may “burn” from the heat;
• concrete - their characteristics resemble stone products, but are much cheaper. In hot summer conditions, the ability of outdoor concrete flowerpots to effectively retain moisture in the soil is especially important. Due to the low thermal conductivity of this material, the plant’s root system will not suddenly overheat or overcool. Flowerpots made from a mixture of concrete and stone chips look solid and solid; due to their massiveness, they are suitable mainly for areas of a fairly large area;
• plastic - they are produced in a wide variety of shapes and colors. Perennial plants that overwinter in the fresh air can be planted in frost-resistant outdoor plastic pots - such products can withstand temperatures from +50 to -40 °.

Making outdoor flowerpots with your own hands

On sale is a wide selection of outdoor flowerpots made from the above materials, corresponding to modern trends in landscape design and in various price categories. They are usually made from moisture- and frost-resistant materials that can withstand various weather conditions. In addition, it is quite possible to make suitable flowerpots for outdoor plants yourself - this does not require significant financial costs, nor the presence of special skills. Thus, you can create original products with your own hands that will decorate the site, harmoniously combining with the existing style of landscape design, buildings located on the site, as well as green spaces.

Flowerpots from scrap household items

You can make flowerpots yourself literally from scrap materials - wooden boxes, garden watering cans, car tires, old cans, barrels, jugs, wheelbarrows and carts. This garden decor looks very creative and will make the area unique and memorable. Flowerpots can be painted in different colors; to increase durability, it is recommended to coat the wood with antiseptic impregnation or varnish. Baskets woven from wicker or wire look nice, as well as old dishes (stuffed clay bowls and jugs, ladles and pots) adapted for planting plants. After heating, old plates become plastic, so it is easy to form flowerpots of the desired shape from them (try not to get burned). With the help of several flowerpots, made independently, you can arrange various flower arrangements.

The possibilities for decorating flowerpots are limited only by your imagination - you can use small stones, pebbles, shells, etc. In addition, you can decorate the flowerpots with a mosaic coating - using broken colored glass, fragments of earthenware and porcelain (they are attached using tile adhesive).

Flowerpots made from stumps and cut trees

A stump or wood cut of sufficient thickness can easily be converted into a flowerpot. For this you will need a drill and a chisel.

It is necessary to drill holes at a small distance from each other and gradually remove the wood from the stump using a chisel to obtain a hole of the required depth. The prepared depression in the stump is covered with earth and plants are planted in it.

A cut tree with flowers planted in it looks very decorative and creative. For this purpose, a recess is prepared in it, as for a stump. A pot or other suitable container with planted plants is placed in it. It is not worth filling the stump hole directly with soil, since the wood is very susceptible to moisture, and as a result of watering the plants it will begin to rot. To avoid getting wet and subsequent damage, it is recommended to treat the wood with a special protective impregnation.

Vases made from tires

Many people have seen flowerpots made of tires placed in city flower beds. It’s easy to make similar decor for the local area of ​​a country house or summer cottage yourself. To do this, you will need old car tires (they are easy to get from tire shops), as well as about half an hour of free time. Using a well-sharpened knife or jigsaw, you will need to cut out the petals of the vase (the recommended width of the ornament is at least 10 cm), and then turn the tire inside out. Next, you can add decorative cuts around the perimeter of the flowerpot, giving the rubber sections the shape of triangles, rectangles, semi-ovals, and petals.

After this, all that remains is to paint the product in a suitable color, and, if desired, apply a decorative design. After the paint has dried, a special non-woven agricultural fabric is placed on the bottom of the flowerpot, allowing moisture to pass through and providing drainage, and then it is filled with earth.

Concrete flowerpots

Concrete street flowerpots are very easy to use and their properties are not much inferior to stone products.

To make such an outdoor flowerpot with your own hands, you will need:

• cement-sand mixture;
• sunflower oil;
• two containers of similar dimensions - the larger one will act as a mold for the product, with the help of the second it will be possible to form the walls of the flowerpot;
• plastic tube, cut into several pieces about 5 cm long.

Sequencing:

DIY flower pots

At home, you can also make a flowerpot - a decorative flowerpot, the design of which does not provide for drainage. A pot of plants will usually be placed in it, or you can plant them directly in a pot (this will require drainage). As a basis for such a homemade flowerpot, you can use any available container of a suitable shape. A layer of clay, gypsum or asbestos at least 2 cm thick is applied on top of it. The vessel used as a base is wrapped in a gauze bandage - it must first be moistened in plaster, diluted to a creamy consistency. After the material has hardened (after about 12 hours), the product must be cleaned using sandpaper. After this, you can start decorating the flowerpot - for example, paint it with acrylic paints and varnish it.

It is worth considering that the sizes of plants and containers in which they are planned to be planted must correspond to each other. Climbing hanging plants are suitable for hanging products; as they grow, they will beautifully fall from the flowerpots. In containers located at ground level or at a low height, you can plant ground cover and low-growing plants - beautifully flowering and decorative foliage perennials.

Well-chosen flower arrangements, planted in outdoor flowerpots and distributed throughout the area, will highlight the existing vegetation and buildings, acting as a highlight in the surrounding landscape.

Outdoor flowerpots - photo

Making outdoor flowerpots - video