Design of a room with an arch on the wall. How and with what to decorate the arch - relevant ideas for the element, their competent implementation. Video: process of applying decorative plaster

Doorways with arches have long gained popularity among the population. New Construction Materials and elements made the creation of this decorative element much easier. The drywall alone is worth it - it made the process many times easier. However, after creation it will need to be finished. We’ll talk about how to decorate an arch in an apartment or house in this article. In practice there is a large number of finishing methods, but within the framework of the article we will consider the main, most popular ones and touch on the features of finishing with them.

Buying material for finishing an arch in an apartment will not be a problem. It is the choice that will cause difficulty. Among wide range You can immediately get confused. This is only in appearance. And if you take into account their characteristics, then you can generally get into a stupor.

Wallpaper

They are the most popular finishing option. Let's take a look at the advantages:

• The most accessible material;
• The finishing process is simple;
• Allows you to create any style or design;
• Possibility to choose the required texture and color;
• You can choose moisture-resistant or paintable. They significantly expand the possibilities of decoration, but will cost more.

However, it is impossible to do without disadvantages:

• Low service life. They will lose their saturation and color. Re-gluing is required periodically;
• Does not tolerate damage well. If there are tears, it will be impractical to re-glue, as the attractiveness will immediately decrease.
• Does not have moisture resistant qualities, with the exception of more expensive washable options.

Finishing sequence

Making an arch in an apartment with your own hands is not difficult. However, for those who have not done gluing before, the following sequence of actions will be useful:

1. Dilute the glue according to the instructions. When preparing, the main thing is to prevent the appearance of lumps, they can disrupt the entire process. Mix the glue thoroughly.

2. First, stick a strip on the wall near the arched opening. The next piece of wallpaper is glued so that it covers a small part of the opening. After gluing, the protruding part must be cut off. However, you should leave an allowance of approximately 2.5 cm.

3. The left allowance is cut every 2 cm and bent towards the slope. It sticks to the surface with maximum density.

4. Glue the room wall on the other side in the same way.The final operation will be pasting the arch arch. You will need to cut a strip of wallpaper with a width corresponding to the depth of the opening. Please note here that make the length longer so that, if necessary, you can move the strip to align the patterns.

5. The strip should be firmly glued to the arch and side walls. If the arch is high, the strip can be divided into several parts.

6. Finally, wipe everything with a dry cloth, removing any air bubbles.

As you can see, it is quite possible to decorate an arch in an apartment with wallpaper on your own. If you have any doubts, we will provide video instructions below.

Decorative plaster

Decorating an arch with decorative plaster is also quite popular. Allows you to create a variety of textures or patterns, thereby giving maximum uniqueness to your doorway. The advantages are as follows:

• Easy to install. Even a novice master can handle it;
• Low cost;
• Ample opportunities for creativity.

Plastering also has its disadvantages:

• Difficulty in repairing damaged areas. However, it is easier than in the case of wallpaper;
• Difficulty of care. It does not like moisture, and the texture on the surface makes wiping difficult.

Finishing sequence

A worthy option when deciding how to decorate an arch in a room. The application sequence will be as follows.

1. First of all, you need to carry out work to level the surface of the opening for subsequent application of decor.

2. Careful alignment is not required. It is only necessary to eliminate serious irregularities. It is enough to putty the surface.

3. After applying the putty, it should be treated with a primer. Necessary for better adhesion of surfaces and finishes.

4. When the primer has dried, you can begin applying the plaster. It is applied with a spatula. The plaster applied to the surface is processed with a trowel or sponge to create the required surface structure.

5. Once the material has completely hardened, the surface is painted.

Thus, the arch in the apartment with your own hands is made of decorative plaster– this is not a complicated process. It’s completely within everyone’s power.

Decorative rock

An arch trimmed with decorative stone undoubtedly looks gorgeous. The material can easily fit into any decor. Advantages:

• Easy to care for. It is difficult to damage and is not afraid of moisture;
• Long service life. Does not lose its original appearance;
• Presentable appearance. Able to add luxury to any interior.

However, treating an arch with artificial stone is not too cheap. That's what it is main drawback– cost, which affects its demand. In addition, if you have not laid such material before, it is unlikely that you will be able to finish it efficiently.

Installation sequence

Please note that this finishing method does not require maximum leveling of the wall surface, which greatly simplifies the entire process. You can finish the arch in the doorway in the following sequence.

1. Prepare the solution. Depending on the type of stone, a different solution may be used, please check. Most universal option– use of liquid nails.

2. You should start from the bottom. The first element is laid at the junction of the wall and the opening. Customized with building level and snuggles.

3. The entire arched opening is lined.

4. Stone elements laid along the arc are cut along its radius. Use an angle grinder. File the cut.

5. The seam space is sealed with mortar. Available for sale special compounds for this material.

Mosaic

The next fairly popular material will be mosaic. The assortment is also very large. All modern technologies are used in production. For those who are looking for how to decorate a plasterboard arch, this will be one of optimal options, since they are made of the following materials:

• Ceramic;
• Glass;
• Metal;
• Tiled;
• Concrete.

Finishing is carried out by analogy with decorative stone. Also, the elements are mounted using an adhesive solution.

A feature of the installation may be the need to select a pattern. Therefore, if you plan to do the work yourself, then take this complication into account.

Corners and moldings

Many home craftsmen wonder how to design an arch the best way. For this, in addition to wallpaper or decorative plaster, various types of moldings and corners are sold. The range is extensive. The materials from which they are made are also metal, gypsum, polyurethane.

The attachment process is simple. At the ends of the arch they are installed on both sides. Fixed liquid nails. The installation process is the same for both elements. Made from the following materials:

• MDF;
• Plastic;
• Aluminum;
• Wood;
• Metal;
• Polyurethane.

In general, anyone can finish the arch. The first step is to decide on the material, and then study the installation technology, which for the most part is not complicated.

When thinking over the overall interior design of a future apartment or house, willy-nilly you have to think about the design of doorways, as well as transitions from one room to another. And if one owner sees medieval-heavy stone or wooden arched ceilings, then the imagination of another draws airy light and light Greek arches. Depending on the chosen option, the material for creating and finishing the decorative architectural element of the planned interior is selected accordingly. Will it be an open arched structure without doors or classic arched entrance doors, will it be decorative stone, wood or lightweight drywall, of course, it’s up to the owner or designer to decide. In any case, the arched structure must fit organically and competently into the intended interior concept.

Photo of finishing arches with decorative stone in an apartment with your own hands

One of the most popular options for decorating doorways is finishing the arched perimeter with decorative stone. There are a great many proposals for standard arch decoration. It would seem that it couldn’t be simpler: order – pay – receive. However, many homeowners, as true craftsmen, consider individual, one-piece design much more preferable.

Agree, when your dreams picture a stern entrance to the medieval halls of a castle, and they offer you a line of cheerful multi-colored bricks, it becomes at least annoying.

Decorative stone has many faces:

• granite;
• large pebbles;
• marble;
• sandstone;
• slate.

And these are just a few of the forms of practical finishing material. In addition to imitating natural materials, using decorative stone you can create the effect brickwork with varying degrees of aging.

Among other things, decorative stone is best example corrosion-resistant environmentally friendly material. It is much lighter than many natural materials and therefore simple and convenient for self-installation upon registration arched openings.

Actually, it is better to entrust the creation of the arch itself to specialist builders, but its finishing is quite within the capabilities of any home craftsman.

Working with decorative stone is made easier by a number of significant points:

• finishing does not require a perfectly leveled surface;
• the presence of many additional components makes it easy to simulate the complex relief of the coating being formed;
• small compared to natural materials, weight of decorative tiles.

To achieve the expected result, it is enough to know the characteristics of the selected finishing material and follow the basic rules of masonry. First of all, you need to calculate the required number of tiles needed for the job. Preference is given to narrow tiles of decorative stone, in places of curves and when designing internal vaults, and wider tiles, in the presence of smooth and smooth lines of arched openings.

Laying is usually done in two standard ways:

• seamless;
• with preservation of seams.

The choice of how to design an arch in a particular interior is made based on the general style of the room and the preferences of the owners. Typically, the option of preserving the seams is chosen. It is more decorative and quite technologically simple. The main thing here is not to overdo it in the width of the seams.

The prepared surface of the arched opening is primed and notches are made for better adhesion of the adhesive composition and decorative stone. Can be used as adhesive solutions cement mixtures and "liquid nails". Proposed construction stores dry adhesive mixtures must be prepared strictly following the manufacturer’s recommendations. The adhesive mixture is applied to decorative tiles, which is then pressed against the work surface. Finishing is done from bottom to top.

A certain difficulty is posed by finishing the junction of the wall and the actual surface of the arch. To visually hide the junction of perpendicular surfaces, it is recommended to lay decorative tiles on the arch arch with an extension beyond its corner edge equal to approximately the thickness of the tile itself. Trimming the tiles is done using a hand saw. The final stage is decorating the seams. This is done after the masonry has completely dried. The seams are filled to the full depth with grout, after which the excess is removed and the surface of the seam is treated using a special brush.

Photo of a beautiful arch design in an apartment

As a rule, any arched structure is conceived equally both for interior decoration and for the purpose of optimizing living space and increasing its functionality.

It is believed that it is best to make an arch in the hall, corridor or living room. In fact, it all depends on the layout and size of the premises where this architectural element is supposed to be placed.

The living room and kitchen area united by an arch often looks very impressive, allowing you to create an atmosphere of intimacy, intimacy and comfort, or, on the contrary, solemnity and spaciousness.

A completely unexpected effect is obtained when using arches between loggias and adjacent rooms.

An arch can delimit or unite living space, which is especially important in children's and bedrooms, as well as in any multifunctional rooms. This way you can create work, play and relaxation areas.

Arched structures supplemented with shelves will allow you to rationally use every centimeter of the limited space of small-sized housing. In addition, with the help of plasterboard arches it is easy to disguise many shortcomings standard layout and various less aesthetic elements of communications.

It is customary to highlight the following types arches, differing in the shape of the vault:

• Roman classic arches, with a symmetrical semicircle arch, ideal for rooms with high ceilings;
• arches in the Art Nouveau style, which look most advantageous in Not large apartments with low ceilings;
• Slavic rectangular arches with small smoothed corners, universal for any interior;
• oriental arches with a characteristic vault shape in the form of a pointed dome, used for interior decoration in the Moroccan style;
• Thai arches with one beveled side, which fit well into many interior styles;
• trapezoidal arches with sharp beveled corners, which look advantageous in a wooden frame and represent an excellent version of a classic English interior;
• portals are the simplest and most modest representatives of the arched family, maximally saving room space;
• niches - pseudo-arched closed structures adjacent to the wall and used as a frame for shelves for books, a stereo system or a TV;
• round and oval arches, visually smoothing corners and strict planning lines, used to create stylish and fashionable interiors.

Different types of arches:

Photos of plasterboard arch finishes in an apartment

Among all existing options When creating arched structures, installing a plasterboard arch is perhaps the least labor-intensive. Almost every home craftsman can make an arch from this material.

Drywall, thanks to its unique characteristics and relatively low cost, allows you to create structures of any shape and complexity. And one of its most significant advantages is the possibility of intra-arch installation of various lighting.

The main advantages of plasterboard arches include the following:

• plasterboard is easy to process, you can create any shape from it, and it does not require the use of special expensive tools and devices;
• Easy to hide with drywall existing shortcomings walls and doorways;
• it is environmentally friendly as it is made from natural materials.

With the advent of the possibility of installing arches from plasterboards, many owners of standard and exclusive housing ceased to worry about the problem of how to decorate or modernize their interior without causing large-scale destruction of the premises.

There are a great many options for designing arches. In all architectural styles and with the most unimaginable decor. Classic, modern, baroque, gothic, country and high-tech - all this is just a small part of the possible use of arches in the interior.

You looked at a selection of photos of arches in the apartment. Big photo can be seen in the section

Every house or apartment has several doorways. One of the popular and common ways to design them is to create an arch. In addition to the fact that it must be done correctly, great importance has a design, this stage of work must be given Special attention. There are many options for finishing arches, they all have both advantages and disadvantages.

Popular materials for arch finishing

One of the most accessible and effective ways Revitalizing the design of a room, giving it an individual and unique look is the creation of an arch. It can have a wide variety of shapes and be made of different materials. Just creating a door arch will not be enough; it still needs to be properly and beautifully finished. There are several options you can use for this. It must be remembered that in addition to giving the structure a beautiful and attractive appearance, the finishing material can also protect it from damage, so its choice must be approached competently.

The decoration of the arch should not only give it attractive appearance, but also protect from possible damage

Dye

Painting is the easiest and accessible method finishing of the arched structure, which is why it is very popular. The advantage of this material is its availability and ease of application. It is enough to purchase paint and apply it to the prepared surface using a brush, roller or spray gun. To get a beautiful result, you need to apply at least two layers. The disadvantage of this type of finishing is that the surface must be prepared very carefully, and this takes a lot of time and effort. If there are any irregularities on the arch, then after painting they will be even more noticeable.

The arch can be painted to match the walls or in a contrasting color

There are two main options for this finish:

• painting in the same tone as the wall, then the structure dissolves in the interior;
• painting in a contrasting color, in this case the focus is on the door arch.

Wallpaper

Wallpaper is also a common option for finishing an arch. You can choose them to match the color of the walls or use a contrasting solution. Now liquid wallpaper has appeared, which is often used to decorate the arch.

To cover the arch, you can use regular, vinyl, textile or liquid wallpaper.

Advantages of wallpapering an arch:

• big choice, so you can purchase material of the required shade and texture;
• ease of installation; no special skills or tools are required to perform the work;
• affordable price.

Flaws:

• fragility. Even the most durable wallpaper is easily damaged, so you have to change it after 2–4 years;
• discoloration. When exposed to sunlight, wallpaper quickly loses its original color.

Better to buy plain wallpaper without ornament. If the walls are covered with the same material, you won’t have to select a pattern, so the work can be completed easier and faster. To decorate the edges of the arch you can use plastic corners. They will act not only as decorative elements, but will also reliably protect the corners from possible mechanical damage.

Tree

Decorating the arches with natural wood gives the room style, solidity and beauty. This material goes well with almost any design solution, but most suitable for finishing an arch in a wooden house.

An arch made of natural wood looks especially stylish in combination with other wooden interior elements.

Advantages of finishing an arch with wood:

• the original presentable appearance is preserved for many years;
• high strength when finishing with hard wood;
• environmental friendliness.

Flaws:

• at high humidity even if there is additional protection wood is prone to deformation;
• wooden structures do not tolerate temperature changes well, so finish the arch near entrance doors such material is not worth it;
• heavy weight. Elements from natural wood it is difficult to mount alone, so you need to invite an assistant and securely fix them;
• high price.

If valuable wood species are used to decorate the arch, then usually decorative items They are ordered from specialized companies and installed by specialists. If you have the necessary skills, you can decorate an arch with wood yourself.

MDF panels

MDF panels are a good alternative to natural wood.

Can be purchased ready-made kits MDF panels for arch finishing

This material consists of wood chips and, depending on the type of coating, can be:

• laminated. The surface is covered with PVC film, which imitates natural wood or other material. In addition, such a coating increases the strength of the material;
• veneered. The slabs are pressed with thin layer veneer, after which they are varnished.

Compared to natural wood, MDF panels have the following advantages:

• resistance to high humidity and temperature changes;
• light weight of the panels, which simplifies the installation process;
• affordable price.

Disadvantages of MDF panels:

• when delivering targeted strikes they are easily damaged;
• under the influence of ultraviolet radiation they can change their original color;
• service life is shorter than that of natural wood.

Cork

Arches decorated with cork look beautiful. Panels with a thickness of 3 mm or more are made from it, covered on top with thin veneer and impregnated with wax. You can use cork in rolls, but in this case it is not always impregnated with wax. To give rolled products the required color, they can be painted on the front or back side. In addition to this, there are also cork wallpaper. They have paper base with a thin layer of cork glued onto it. Often such wallpapers have a self-adhesive backing, which makes gluing them simple and quick.

The arch can be covered with cork wallpaper

Benefits of cork:

• is not afraid of the impact of targeted impacts;
• does not accumulate dust;
• retains its original appearance for a long time;
• has antibacterial characteristics, so fungus and mold do not form on it.

Flaws:

• afraid of moisture. If the surface has not been treated with wax, then at high humidity the material may become deformed;
• absorbs odors well;
• has a high cost.

Mosaic

More recently, in order to implement such a solution, people had to make a mosaic from broken glass or ceramic tiles. Now there is a ready-made mosaic on sale and all that remains is to glue it to the surface of the arch. There are usually no difficulties with performing such work, but since the elements are very small, finishing will take a lot of time.

Finishing a mosaic arch in a large opening will take quite a lot of time.

Advantages of mosaic:

• large selection of shapes and colors;
• moisture resistance;
• strength;
• high wear resistance;
• long service life.

Flaws:

• difficulty of performing the work. It requires not only certain skills, but also a lot of time;
• high price.

Depending on the design style of the room, choose ceramic, metal orglass mosaic.

Decorative rock

The arch can be finished with both natural and artificial stone. The cost of natural materials is higher, so they are usually used for finishing artificial analogues. Since the weight of the stone is large, lay it on plasterboard partitions It’s not worth it, it’s better to do it on main walls. Instead of decorative stone, you can decorate the arch with tiles to resemble facing bricks.

If the arch is made in a main wall, it can be finished with stone tiles

Advantages of finishing an arch with decorative stone:

• a large selection of materials that differ not only in color, but also in texture;
• high strength;
• good moisture resistance;
• long service life.

Flaws:

• complexity of installation. You must have certain skills;
• heavy weight of the material, significantly increasing the load on the structure;
• high price.

It is better to use small stones to finish the arch vaults, as they are much easier to lay.

Decorative plaster

There is quite a large selection different types plasters, so you can choose the one that will harmoniously fit into the interior of the room. Using this material you can create unique solutions, here everything depends on the imagination and abilities of the person finishing the arch.

Methods of finishing with decorative plaster are limited only by the imagination of the master

The store sells ready-made dry mixtures that just need to be diluted with water and can be applied to the prepared surface.

Advantages of decorative plaster:

• allows you to create unique solutions that will be impossible to repeat;
• you can create both a smooth and expressive relief;
• if it is necessary to update the surface, it can be repainted;
• the surface does not need to be carefully leveled before applying the finish;
• affordable price.

• easily damaged by mechanical stress;
• Do not carry out wet cleaning;
• if you need to make cosmetic repairs, this area will stand out from the general background.

To apply decorative plaster, it is enough to have minimal skills and a little time.

Now there is a large selection of polyurethane moldings on sale, with which you can quickly and originally design an arch. These elements are usually fixed with glue, and for greater strength, self-tapping screws can be used.

With the help of polyurethane moldings you can quickly and originally design an arch

Advantages of finishing with polyurethane moldings:

• a large selection of different elements;
• ease of installation;
• affordable price.

Flaws:

• not suitable for use in expensive interiors;
• low resistance to mechanical damage.

What tool will you need for the job?

Depending on what material the arch will be finished with, you may need different tools:

How to prepare the arch surface for finishing

Finishing the arch is a responsible and rather labor-intensive process. It is usually made from plasterboard. Experts recommend that such surfaces be puttied. This is due to the fact that if over time you want to update or replace the finishing material, in places where there is no putty, a layer of cardboard will be removed simultaneously with the finishing, and this can lead to damage to the entire structure.

The procedure for carrying out preparatory work:

1. Smoothing the transition between the wall and the side surface of the arch. The joint is smoothed using putty so that the transition from one surface to another is not visible.

   The transition between the wall and the side surface of the arch is leveled and smoothed using putty

2. Sealing seams and screw heads. For this, sickle tape is used, and the heads of the screws are sealed only with putty.

   Self-tapping screws and seams are sealed with putty

3. Aligning the transition between the arch and the wall. For this purpose putty is used. It must be applied with a wide spatula; it must be wider than the overlap in order to obtain a smooth and even transition.

   The transition of the arched arc into the wall should be smooth and even

4. Strengthening corners. One of the most problem areas door arch are its angles. To strengthen them, you need to use metal or plastic corners, which are fixed with putty or self-tapping screws. Instead of corners, the edges of the arch can be glued with sickle tape.

   The corners are reinforced with sickle tape or a perforated corner

5. Putty arch arch. The entire surface is evenly covered with putty and leveled.
6. Processing of side surfaces. This work must be done from top to bottom. The junctions between the wall and the arch are taped with sickle tape. The width of the tape should be such as to completely cover the transition point between the arch and the wall. After this, the side surfaces are puttied to completely smooth out the transition.

   The putty is applied to the sickle tape glued at the junction of the walls and the arch

7. Final surface leveling. You can begin work only after the putty has dried. Grouting of the surface is done using sandpaper.
8. Primer. To ensure good adhesion of the surface to the finishing material used, it must be primed. The primer is applied using a brush or roller. After it has completely dried, which will take about four hours, you can proceed to finishing work.

The described work should be performed with starting putty, since it has better adhesion and its price is lower. Depending on the finishing material used, it may be necessary to level the surface with finishing putty. This is required if the arch will be painted; in other cases, finishing putty may not be applied.

To eliminate large differences and significant unevenness, the putty can be applied in several layers, the thickness of each of them should not be more than 5 mm. Before applying the next layer, allow time for the previous one to dry thoroughly. Depending on the conditions in the room, the type of putty used and the thickness of the applied layer, the approximate drying time will vary:

• plaster - 3–6 hours;
• cement - from 12 to 24 hours;
• polymer - from 4 hours.

Expert advice to help you complete your preparatory work more efficiently:

• When filling holes, it is recommended to apply putty a little more than necessary, since the solution tends to dry out a little. Better later remove excess tubercle sandpaper, and if a hole remains, then it will be necessary to putty this place again;
• To properly level the surface, you may need to apply three or four layers of putty. Keep in mind that before applying a new layer, the previous one must dry completely;
• When sealing joints, you need to press the solution well into the existing gap to completely fill it. In this case, it is also better to apply a little more solution and then sand it off, rather than carry out additional sealing when depressions form.

Video: preparing the arch surface for finishing

The sequence of finishing an arch with different materials

The order of work will depend on the selected material.

Wallpapering

To decorate the arch, ordinary thin wallpaper or heavy vinyl, textile, and glass wallpaper can be used.

The process of gluing an arch with thin wallpaper:

When using heavy vinyl wallpaper the edges of the strips are cut exactly along the border of the arch, and then this area is covered with a decorative corner.

Finishing with decorative plaster

The order of finishing work:

1. Applying plaster. This is done using a spatula. After the plaster has dried a little, it is lightly sanded with a paint float.

   Plaster is applied using a spatula

For getting beautiful result When painting decorative plaster, you must use several colors selected in the same range. First, darker paint is applied using a sponge and brush.

A layer of darker paint is applied first.

2. Painting with a second layer. You need to give time for the first layer to dry completely. After this, using a foam sponge, lightly apply lighter paint.

   The second coat of paint should be lighter

3. Wax coating. When the paint dries, the surface of the arch is covered protective layer wax mastic.

Video: process of applying decorative plaster

When using a mosaic, the work is performed in the following sequence:

1. Creating a matrix. Since the mosaic elements are very small, it is much easier to install if you first assemble them into small fragments. The elements are laid on a sheet of paper and then glued on top fine mesh. There are ready-made matrices on a mesh basis, which can also be used to decorate the arch.
2. Mosaic installation. The finished matrices are fixed to the surface of the arch using glue. We must be careful that it does not fall on front surface mosaics.

   The finished matrices are glued to the surface of the arch using glue

3. Grouting joints. Select the required grout color and fill all the seams with it. An hour after grouting, remove the mortar using diagonal movements rubber spatula. After this, wipe the surface with a damp cloth.

   To remove grout, wipe the surface with a damp cloth.

Laying decorative stone

Work order:

1. Preparing the stone. After purchasing a decorative stone, it must be washed and dried. To simplify the work, it is necessary to sort the elements by size, since they all have different lengths and thicknesses.
2. Stone trimming. After the elements have been sorted, a special machine is used to cut off the edges of the stones that will be mounted on the corners to create a 45° cut. The tiles are sorted by color and then laid out along a straight line.

   The edges of the stones are cut using a special machine.

3. Glue preparation. If the decorative stone will be mounted on a putty and primed surface, it is recommended to use quick-setting glue. When performing work on cement plaster It is better to use cement tile adhesive.
4. Stone finishing. Work starts from the bottom and gradually moves up. A gap of 2–3 mm is usually left between individual elements, but installation can be carried out without a gap. To ensure that the distance between the tiles is the same, special plastic dividers are used.

   The stones begin to be laid from below and gradually move upward

Video: artificial stone installation process

Wood finishing

If you decide to finish the arch yourself natural wood, then the easiest way to do this is using wooden lining:

Finishing with polyurethane moldings

Installation of moldings is carried out in the following sequence:

1. Preparation of elements mounted along the radius of the arch. Measure the required length and cut off a piece of molding. Nails are driven into it in increments of 50–100 mm, after which inner surface apply glue.

   Nails are driven into the molding and coated with glue.

2. Installation of radius molding. Place the prepared element in the center of the opening and hammer in a nail, after which they move from the center to different sides. If the molding does not press well at the bend, you can hammer in 1-2 additional nails.

   The molding is fixed with nails and pressed well to the surface of the arch

3. Installation of vertical elements. The distance from the floor to the radius molding is measured in height and the required piece of the vertical element is cut off. It is also attached with nails and glue, and the junction of the vertical and radius molding is coated with sealant.

   Vertical elements are also attached using nails and glue

After the glue has completely dried and the moldings are securely fixed, you can remove the nails. All that remains is to putty the moldings and paint them in the chosen color.

Pull out the nails, putty, and then paint the moldings

Video: sequence of finishing an arch with polyurethane molding

If MDF panels are mounted with glue, then the sequence of work will be as follows:

If the panels are mounted on the sheathing, the surface of the arch need not be leveled:

1. Creating a sheathing. For this they can be used metal profiles or wooden blocks.
2. Installation of guide profiles. They are fixed at the top and bottom of the sheathing.
3. Installation of panels. MDF panels are inserted into the guide profiles and fixed to the sheathing using self-tapping screws.

Finishing the wall around the arch

It is necessary not only to beautifully finish the arch, but also to think about what materials the walls around it will be finished with.

The main design options for walls around the arch:

The sequence of finishing the walls around the arch will depend on the chosen material. This process is no different from how the installation was carried out finishing coating on the arch.

Installation of a decorative corner

Decorative arched corner allows you not only to highlight the arch against the background of the wall, but also hides possible irregularities. Its use is especially relevant when the arch was made independently and for the first time, so the work was not done perfectly.

The procedure for installing a decorative corner:

With the help of an arch you can decorate beautifully and unusually doorway, arched partitions allow you to zone the room. The presence of an arch in the interior makes it unusual and non-standard, but it must be organically combined with the surrounding elements.

A person with basic skills can decorate an arch with his own hands. construction work. After the finishing material has been selected and everything has been prepared necessary tools, it is necessary to study in detail the technology for performing the work. By following the developed instructions, you will be able to finish the arch yourself and at the same time get a result no worse than that of the professionals.

Arches like architectural element known to people for a long time, but in our time they have received a second life.

Breathe life into them modern designers who began to use arches in the interior of residential premises.

With the help of arches you can elegantly zone a room. In addition, the arches themselves can become spectacular decoration apartments.

Also, with the help of an arch, you can not only divide the room into zones, but also combine two rooms, for example, a living room with an entrance hall, or a dining room with work area kitchens.

The most common technique is to create a living room interior with an arch that combines the living room with a balcony. Arches are also appropriate in studio apartments, because with their help you can visually create the appearance of free space.

Types of arches

When planning to make an arch in your apartment, it is important to take into account the laws of geometry, so the active type of arch, thanks to its graceful forms, visually expands the space, and the passive design of an arch in the interior always has a strict shape, visually dividing the space.

In addition, before you begin installing the arch, you need to take into account the properties of the material from which the walls of the room are made.

Because when installing the arch, you will have to remove not only the doors and frame, but also part of the wall, since materials that are difficult to dismantle, such as concrete, will not allow you to install the arch.

Classic. The classic arch is universal and most popular because it looks great in the interior of any style, making it sophisticated and sophisticated thanks to the soft lines of the arched structure, as in the photo of the arch in the interior.

Romanticism. This type of arched opening is a pronounced arc shape, while its vertical part is smoother, which is why it looks like a straight line, the sides are rounded. This type of arch will decorate the apartment, replacing a wide doorway.

Modern. This type of arch is in the shape of a semicircle and, thanks to its unusual shape, is suitable for interiors of different stylistic solutions, making the room stylish and elegant.

Rectangular arched opening. This arch option is the most economical because it does not require the cost of dismantling the walls; the door frame is simply removed and the arch is mounted in its place.

This is the easiest and most affordable way to install interior arches in the interior of a standard apartment.

Glass arch. Glass construction made of clear or frosted glass will add sophistication to the interior, suitable for classic style interior design and is simply irreplaceable in poorly lit rooms or in rooms with low ceilings.

Trapezoid. This type of arch is distinguished by unusual design, which is usually installed in an apartment decorated in an exotic theme.

Ellipse. Typically, this type of arch has the shape of a regular or irregular ellipse, and is made of natural wood. This arch looks prestigious and expensive.

Individual shape. Typically, such arches mean a multifunctional arched opening with built-in shelves in the form of broken lines.

Quite often used in small apartments, taking on some of the functions of furniture or, if there are difficulties with dismantling walls, sometimes to cover protruding beams.

Material

When installing modern arches in the interior of your apartment, you need to pay attention to the material from which they are made.

Tree. The most popular arches are wooden arched structures, because they are durable and fit any stylistic decisions interior, wooden arches with carvings look especially impressive. The price of a wooden arch depends on the type of wood, however, in any case it is not the cheapest option.

Drywall. Arches made of plasterboard in the interior are the most practical, environmentally friendly, easy to install and inexpensive. In addition, drywall allows you to change the bend of the arch at the angle you need.

Currently, arched structures made of plasterboard are very popular, due to the fact that it is possible to install additional lighting in them, which is very important for dark rooms. In addition, drywall allows you to create additional niches or shelves in the arch, open and closed.

Styrofoam. This material applies to budget options, is not difficult to install, but it is not strong enough.

Brick. Despite the fact that the creation brick arch In the interior of an apartment, the task is quite difficult, but it’s worth it. Because the end result can be a highly artistic arched opening.

Photo of arch design in the interior

Projects modern apartments often include decorative arches along walls or in passages between rooms. Few owners know that with proper and successful design arched design, the interior of the house can be changed beyond recognition. It is this design element that allows you to place bright accents

Purpose of arches in the interior

All structures perform important functions in interior design. Decorative arches in this sense they are no exception. By replacing interior doors with graceful arched passages, you can make any room more spacious. In large apartments, you can use arches to arrange spectacular accents in the interior.

So, decorative openings in the interior help solve the following problems:

• Freeing up space in the apartment, expanding the view;
• Zoning rooms and at the same time – their visual unification;
• Support of a single style in apartment design.

Which form should I choose?

Main design differences The arches in the apartment are determined by the form and material. In this section we will deal with the first of these indicators. Which arch shape is best to choose for your interior.

Arched openings can be divided into two types:

Active – structures of complex shape that can become an accent in the interior;

Passive - simple and functional models, most often installed in hallways and interior openings.

Classical

The most common version of an interior opening in construction is a classic arch, in which the upper part is made in the shape of a regular semicircular arc. This form will suit any interior and is quite simple to build with your own hands.

Rectangular and square

Openings with right angles are another traditional solution for apartment interiors. It is appropriate to install them in narrow corridors or hallways, where the usual semicircular design will look massive. Rectangular arched openings and niches go well with almost any room design. They look especially good in laconic interior in loft style, minimalism, hi-tech.

Elliptical

Doorway in Art Nouveau styleby design they represent half an ellipse located transversely with a clearly visible transition of a straight line to a rounded section. Such designs look stylish and elegant. They fit perfectly into the interior bright rooms in Provençal or nautical style, will look perfect at the entrance to a living room or spacious kitchen.

Trapezoidal

In simple interiors, openings made in the shape of a trapezoid look good. They will fit perfectly into the loft style and will support the rigor and simplicity of the lines in a classic-style living room. It is worth noting that such an arch is quite difficult to make with your own hands - it is better to have all the details made to order from professional carpenters.

Half-arch

A semi-arch looks like a wide classic arch, divided in half. This design option is quite easy to install and will become ideal solution for decorating narrow interior passages. It is worth noting that the semi-arch is not suitable for all interiors; you need to be especially careful when combining it with the design of the rooms.

Unusual shape

When using soft, plastic materials - such as drywall and foam, the arched opening can be given almost any shape. You just have to make sure that this design will not stand out from the overall interior design. Arches of unusual shape look especially good in spacious rooms.

Choosing materials for finishing with your own hands

The material from which the interior arch will be built is also very important indicator its durability. When choosing materials for future design, it is worth considering the strength of the coating, as well as its resistance to the conditions of a particular room. For example, arches in the kitchen should not be deformed by steam or exposed to greasy contamination, and structures that stand near windows should not lose color when exposed to direct sunlight.

Drywall

Arched structures made of plasterboard are most common in construction. This material is easy to install and transform. To give the drywall the desired shape, the sheet can be bent or cut anywhere. Sheets vary in thickness, so you can choose an option

Tree

Interior arches made of wood have high strength and durability. They look very good in classic interiors. Nevertheless wooden arch not easy to install with your own hands, the lineup Such products are also not very diverse. The way out of this situation is custom production and installation of a wooden opening for the room design. This design can be ordered from specialized workshops or made yourself if you have certain skills in working with wood. Designers recommend installing arches made of this material in spacious rooms, since wooden crafts always look massive.

Brick and stone

Arched brick openings look great in fashionable loft and modern interiors. Depending on the chosen design and texture of this material, they can “age” or “modernize” the design of the entire room. Of course, it makes no sense to use real building bricks - the structure from it will turn out to be too bulky. Most often, a special one is used to decorate arches. decorative brick as small panels. It can be laid on a frame made of plaster or foam plastic, making an imitation of real masonry.

The same recommendations apply to arches using decorative stone. It is worth noting that arches made of brick and stone look most successful in spacious hallways, corridors and kitchens. However, if the interior allows, such a structure can be placed in other rooms.

Arch decor

Ready arch It is best to decorate it in the same style as the rest of the interior of the rooms. This element should not stand out significantly against the background of the overall design of the apartment.

As for the color of the design, it can be matched to the shade of the walls if the arch does not stand out from the common space using doorways (like brick and wooden models). If additional paneling is used, it is worth combining the color of the arch with the interior doors and other functional elements of the apartment.

How to decorate an arch in an apartment yourself? There are several simple and inexpensive ways:

• Wallpapering is the most easy way DIY arch decorations. It is recommended to use the same wallpaper that is used to decorate the entire room. In this case, the arched opening will not stand out from the overall interior space and will not require additional finishing. If the structure is located in the transition between rooms, it is worth decorating it on both sides;
• Painting door slopes - another one easy way decorating an arched opening with your own hands. It is worth noting that to paint arches made of plasterboard and foam plastic, you must first level the surface.
• Decoration with tiles, stone, brick. This option not only looks great in the appropriate interior, but also allows you to mask all the irregularities that may arise when self-construction designs. Brick and stone with an expressive texture will cope especially well with this.
• Decoration– painting by hand or using stencils.
• Installing shelves, changing the arch design. Today it is very popular to create in wide doorways decorative and functional shelves and other structures. This option is most applicable to arches made of plasterboard and other plastic materials. It is best combined with a rectangular or semi-arch.

Of course professional designers We are ready to offer many more ways to design an arch than those given above. However, in this material We tried to combine those options that can be done with your own hands using economical means.

Using textiles for decoration

When installing arched openings as a replacement interior doors, owners often face the question of zoning premises. How to separate and decorate the entrance to a room if it is an open arch? Home textiles are perfect for these purposes.

It is worth noting that curtains will be more appropriate when decorating arches of a simple shape - rectangular, semicircular or elliptical. It is better to select textiles to match the color of the window curtains or the color of the walls in the room. You should not buy heavy and complex fabric options - two-layer, draped and shiny. Let it be a fairly thick curtain in a single shade.

Light in decoration

Wall arches and niches made of plasterboard look most impressive when illuminated. She is the one who will highlight this zone rooms and pieces of furniture located in this part.

In spacious rooms with high ceilings, hanging lamps with small shades will look great in arches. This option is suitable for decorating the kitchen and living room, for highlighting functional areas, such as a table, bar counter, sofa or TV.

If backlighting is required for interior arch, it may be limited to small quantities of built-in lamps. This option will also look good near mirrors or in combination with glass furniture.

In the gallery of our website you can see photographs of arches in the interior of apartments and best ideas their design. Some of these projects were developed by professional craftsmen, other - ordinary people who decided to do the repairs themselves. Looking at them, you can be convinced that with very little effort, you can easily change the appearance of your home beyond recognition.