Wooden ceiling lamps: advantages and disadvantages of the material, independent production of lighting fixtures. Wooden chandeliers. Homemade chandelier made of wood DIY lamps made of antique wood

Using beautiful lamps is one of the simple ways to diversify your interior and make it better. Wooden sconces are a stylish symbol of comfort that will definitely never cease to be relevant and can be used in both classic and modern interiors. It is worth considering what options for natural wood lamps exist and how to use them in the interior.

A little history

A few years ago, crystal lamps were considered a symbol of luxury. Now they are gradually being replaced by wooden sconces. This is a return to the old tradition, when wooden lighting fixtures decorated the homes of the rich and even palaces. Of course, these were very simple products, which are far from those lamps that can be found in modern stores.

The fashion for wooden sconces returned in 2010. Then the designers wanted to draw attention to the disaster that took place in New York, and began to create interesting lamps from branches that resembled driftwood left after a tornado.

This inspired others, and soon the fashion for such sconces returned. Now you can even make a unique lamp yourself by decorating the wood with garlands or LED bulbs. This will make the interior truly unusual and tailor everything exactly to you and your preferences.

Advantages and disadvantages

Wall lamps made of wood have both many advantages and a number of disadvantages. Both of them are worth talking about in more detail.

pros

The most important advantage of a lamp made of natural wood is the environmental friendliness of this material. If the wood is minimally processed, it will be completely safe for your health. This means that you can easily mount such a lamp on the wall, even in a nursery. Wood is also good because it saturates the air with resins, which make breathing easier.

Another positive point is that the wood is easy to work with. This means that you can create a variety of lamp shapes, and you can also decorate them with interesting patterns. Products made from natural wood are very stylish and beautiful. The advantages include the strength of a material such as wood. Wood is very durable.

If it is additionally treated with special impregnations, the lamp will turn out to be of even better quality.

Minuses

However, not everything is so simple, and wooden sconces have certain disadvantages. These nuances primarily include insecurity . In a lamp made of natural wood Incandescent lamps must not be used. This can be unsafe: if the contact in the socket of such a lamp burns out, the tree can also catch fire quite quickly.

Wooden products may attract insects. However, here too the problem can be solved - with the help of simple impregnations. There are solutions that can protect wood from pests. It is recommended to give preference to lamps made of coniferous wood.

The last of the minuses is Moisture is very harmful to wood. This material accumulates it extremely quickly, after which the surface of the sconce can become deformed and lose its attractiveness.

To ensure that the lamp you purchase or create lasts for a long time, try to hang such a device only in a room where there is no high humidity.

Such sconces are more suitable for bedrooms and living rooms; you should not hang them in the bathroom or kitchen, where the surface of the wood will constantly be exposed to hot steam.

By the way, it is also worth noting that there are breeds that are less susceptible to moisture. This is, for example, cedar. A cedar wood lamp treated with special solutions will last you longer.

Options

There is a wide variety of wooden sconces that can be selected to decorate different rooms. Here are some interesting ideas that may inspire you.

Classical

If you want a little classy style, look to antiques. A classic wall night light, stylized as antique, looks very interesting in the appropriate interior. This lamp will make the room more comfortable. The main thing when choosing classic sconces made of natural wood is not to overdo it. If you hang several expensive sconces in a room at once with decoration reminiscent of past luxury, then this may be unnecessary.

Modern

Many designers are pleased with their experiments. For example, the Curve brand. This is a company that produces interesting lamps, each of which will perfectly complement the modern or high-tech style.

Geometry

However, it is not at all necessary to experiment with shapes; you can settle on a classic product made in the form of a square or circle. Such wooden sconces look good in minimalist style rooms.

Self made

Handmade lamps deserve special attention. It's always something unique and unusual. At the same time, you don’t always need to know how to work with wood - a stylish lamp can be created even from a simple twig, coated with varnish and special impregnations.

A garland or LEDs will act as a light source here. In both cases, the lamp will not heat up, which means that it will be absolutely safe.

In what interior should I use it?

Almost any house or apartment can be complemented with a stylish lamp made of high-quality wood. The main thing is to skillfully combine different details and organically fit the sconces into the interior. For example, in a modern apartment, a wooden lamp with a forged base will definitely be inappropriate. You need to know how to avoid such mistakes and where to install natural wood sconces.

In the bedroom

Since most people associate wood with a feeling of comfort, a lamp made from this noble material fits perfectly into the interior of any bedroom:

• For a vacation spot for a couple designers usually recommend choosing something simpler and more discreet - for example, square sconces, wooden clouds complemented by LEDs, or simple panels decorated with patterns. An ideal option for the bedroom is a wooden night light, shining with soft colored lights. Dim lighting will help create a pleasant relaxing atmosphere in the room.
• For children's you can choose something special - for example, a wall night light that transmits rays through shaped openings, creating beautiful patterns on the walls, or a lamp made in the shape of an interesting animal or cartoon character. Even an unpainted tree will still look quite cute and unusual.

In the living room

A sconce with elegant carvings along the entire perimeter of the floor lamp will complement a modern living room. You can pay attention to lamps complemented with fabric elements or metal and glass inserts. The latter are best suited for decorating a room in the Art Nouveau style. This option is very suitable for a loft-style apartment.

Modern interior design consists not only of correctly arranged stylish furniture and the color scheme that prevails in the rooms, but also of proper lighting. Lighting devices allow you to focus on certain areas of the room, visually enlarge the space or, conversely, give the bedroom or living room more comfort and warmth.

Today, crystal wall sconces are no longer a sign of wealth and luxury, but wooden lamps are actively regaining their former popularity. Few people know that in the 16th century, it was structures made of trees that were installed in temples, palaces and houses of wealthy officials. Of course, there was no LED lighting in those days, and instead of energy-saving lamps, the rooms were illuminated with candles placed on wooden branches.

In 2010, a tornado hit New York City, leaving behind mountains of broken branches and fallen trees. Young designers Harris Hine and Amily Visclocky wanted to draw public attention to this topic by creating lamps from found driftwood, but instead revived a long-forgotten style. Thanks to this idea, more and more people began to engage in such know-how and you, too, can easily create unique sconces (wall lamps) with your own hands. Photos of ready-made and interesting lighting devices can be found in huge quantities on the Internet, but we will outline some of the features of such designs below.

Advantages and disadvantages of wooden sconces

In addition to their stylish appearance, such lamps can safely be called environmentally friendly. Not only does wood not emit any harmful substances, it will also, on the contrary, saturate the air in the room with useful aromatic resins that make breathing easier. Another plus is the ease of processing the material. If special equipment is used for the production of plastic and metal structures, then for a wooden lamp you will need tools that are found in almost every home.

Wood is strong and durable, especially if it is treated with special impregnations.

If we talk about the disadvantages of such structures, then it is worth paying attention to the following nuances:

• Wood burns well, so using incandescent lamps in such designs is not recommended. Otherwise, the contact in the lamp socket may burn out and the entire lamp will burst into flames in a matter of seconds.
• Insects actively attack such lighting products.

• Wood is a hygroscopic material. This means that it accumulates and absorbs moisture well. To prevent the structure from deforming and serve for many years, it is better to use such a lamp at a constant temperature and humidity. Based on this, you can hang a sconce above the bed in the bedroom, but installing such lighting fixtures in the kitchen or bathroom is not recommended.

Healthy! Cedar is the most moisture-resistant species, and additional treatment with special solutions will give it even more resistance to temperature changes and moisture.

As you can see, before working with wood, it is necessary to prepare a project for the future lamp and calculate it in such a way that the lamps are located at a distance from the tree. Let's consider several options for such sconces and ceiling chandeliers.

Wood design options

The sconces in the living room interior, photos of which are presented in the article, look very cozy and homely. For this room, you can create a very stylish lamp that can be mounted on the wall or used as a table night light.

One option for creating a lamp is a sconce made from wood and a broken water pump. The resulting result looks very stylish and is suitable for lovers of design, which contains unusual devices that are not used for their intended purpose.

An unusual lamp will be made from the floor of a dried tree trunk, coated with varnish, and pieces of colored crystal glued to it. This lighting fixture can be hung horizontally, vertically or used as a floor lamp-night light.

A stylish Chinese lantern can be made from a broken lamp, bamboo and coconut fiber rope. This is a fairly simple design that looks very impressive both in the house and on the porch or in the gazebo. By attaching a wooden hook to the bamboo, you get a multi-functional sconce on which you can hang plants.

You can make a sconce from wood with your own hands very simply. To do this, you will need a wooden plank that can be given any shape. A kind of hook will be attached to it, on which the lamp will be placed. It will require sticks of the same diameter and length, which we will fold according to the principle of a wooden well or house, which children usually build from pencils. The result will be an unusual lamp, as if from ancient fairy tales.

A creative lamp can be made from a pine branch, a garland and a curtain rod holder. This device is also multifunctional, as you can hang decorations, scarves and much more on the branches. The garland's bulbs do not heat up, so this sconce will not light up, and to create it you will not need any skills in conducting electricity.

A wall lamp for a nursery can be made from a wooden plank in the shape of a cloud and LED lamps. The resulting night light looks very beautiful on the wall, as the light is scattered as if from under a cloud.

Using your imagination, you can make a very creative lamp for a country house, apartment or garden. You can use everything that, as you thought, has not been used for many years and is practically getting ready to be “thrown away.”

What to pay attention to when creating a lamp

• If you cut wood, be sure to always wear a protective mask. Sawdust can cause an allergic reaction.
• If there is only one light bulb in the lamp, then two wires will come from it. The phase is connected to a switch, from which a conductor will go to the input phase. The zero (blue) is connected immediately to the input zero.
• If the lamp has 2 or more lamps, then there will be more wires, but the connection principle will remain the same.

The optimal placement of sconces depends on the type of room, for example:

• The height of the sconce above the bed in the bedroom should be 1.2-1.6 meters from the floor.
• In the nursery, it is better to place the lamp so that the child cannot reach the light bulb.
• In the corridor it is recommended to place it at a height of 2 meters from the floor. If the ceilings are low, then you can hang the sconces lower - at a distance of 1.8 meters.
• The optimal height of the sconce for the living room is 1.3-1.4 meters from the floor.

In custody

As you can see, you can make an unusual lamp for a room from ordinary objects. As a result, you will receive an exclusive and stylish interior element that will cost you a penny, and will look much more interesting than an expensive metal chandelier.

Since ancient times, people have valued what was created by nature. In the old days, almost all household items were made from wood. And this is no coincidence. It is difficult to find a more environmentally friendly and safe material. And the natural beauty of the unique texture amazes with its exquisite outlines. That is why modern interior design cannot do without this valuable material. Wood can be used not only for decorating a room or for making furniture. Wooden lighting fixtures look unique, original and inimitable, especially if they are homemade wooden lamps. Often such an element in the interior is used to emphasize a certain style. Therefore, the configurations can be very diverse.

Simplicity and sophistication. Driftwood chandelier

Making a lamp out of wood with your own hands is not that difficult. Moreover, some products do not even require a special type of wood. You can even use driftwood found in the forest. Moreover, each of them has a unique shape, each of its curves is perfect, since it is a creation of nature itself. Now the main thing is not to spoil its natural beauty during processing. A lamp made of wood (driftwood) will become not only a source of light, but also a wonderful ceiling decoration.

Manufacturing technology

Preparatory work consists of cleaning the driftwood from bark and unsuitable wood, as well as thoroughly drying it. Then the driftwood is thoroughly sanded using sandpaper. Based on the type of lamp, the necessary components are purchased. It should be remembered that wood is highly flammable, so a lamp made of wood requires the use of energy-saving lamps. LED ones are also suitable.

Holes for wiring should be drilled in special places. On the side of the branches that will be located closer to the ceiling, you can use a narrow blade to make grooves for the wire. After laying the wire, all holes must be filled with putty. At the ends of the driftwood, sockets are installed on which lamps and shades are attached. The driftwood is attached with chains to the ceiling. All wooden elements must be varnished. The wooden ceiling lamp is ready.

Japanese style. Desk lamp

Table lamps can be an excellent interior decoration. Wood is the best choice for making such a miracle. To ensure that the work does not cause unnecessary trouble, you should prepare all materials and tools in advance. To make it, you will need a processed piece of board, square (preferably the wood is the same), light veneer, wooden tenons, PVA glue, and a drill with a disk attachment. For such a lamp, a lamp with a small base is used. Electrical components also require a cartridge and a wire.

Manufacturing process

Making a wooden table lamp with your own hands is very simple, especially if you have the appropriate skills.

First you need to drill holes in the corners of the wooden plank. To do this, measure one and a half centimeters from each edge and outline the squares on which the vertical bars will be installed. Marks are made for holes in the center of each square. If the tenons are made by hand, then their size should be adjusted to the diameter of the drill. Otherwise, the drill should be selected according to the size of the dowels. There is no need to drill holes all the way through. Up to half the thickness will be enough. It is also necessary to drill holes in the bars and glue spikes there. In the center of the base board you need to make a large hole for the cartridge. If difficulties arise, you can simply drill a hole for the wire. Shallow cuts should be made between the holes on the base for the veneer. You also need a deep enough channel for the wire. The wire cord must be secured in the cut. A table lamp made of wood, created with your own hands, is almost ready. The last step left is assembly. The bars are glued to the stand, the cut veneer plates are inserted into the cuts. The original wooden lamp is ready.

Lamp made of wood and coffee service

Making such an original lamp is quite simple. To do this, you need to take a suitable size board made of valuable wood, pre-treated with stain and varnished. You will also need three coffee cups with saucers with holes in the bottoms (can be drilled). To enhance the decorative effect, it is best to use cups made of thin glass. The wires connected to the sockets are passed through the holes in the lampshades (saucers and cups) and attached to the board. All wires are brought out on the part of the board that will be hidden, they are connected to each other and to the main wire. This design can be mounted on the wall or hung on the ceiling with chains or a twisted cord. But with the help of such a lamp you can also create an antique effect. Instead of cups and saucers, you can use clay pots, and sand the board itself. Such a wooden lamp will fit perfectly into the design of a country house kitchen.

Original arrow lamp

Dimensions are selected individually based on the characteristics of the interior. It looks quite impressive when the arrow lamp occupies the entire wall vertically. One such device is enough to illuminate the entire room.

When making such a miracle you will need imagination. The simplest solution is to take a long board for the base of the arrow and several small strips for the point and fletching. All parts must first be fastened together with glue. For reliability, you can additionally connect them with wooden plates and screws. It is best to use an outdoor garland as a lighting element. Based on its size, holes should be drilled in the wooden structure and light bulbs should be inserted there. On the reverse side it is necessary to secure the wires well with tape and glue. It will not look very neat, but all this will be hidden when installing the lamp.

With a little imagination, you can make such original lamps from wood. Photos may give some ideas.

Plank lamp

Each carpenter ends up with a lot of valuable wood scraps, which are usually difficult to find a use for, but there is no need to rush to throw them away either. You can make an unusual one from them. Moreover, for this design you won’t even need nails, but a lamp like this will come out of wood. The photo cannot even convey all its beauty and effectiveness.

To make it you will need seventeen identical sized boards. Multi-colored and different textured boards look more impressive. Each plank must be given a wedge shape. To attach the blades to the base you will need wooden pins. A hole is made in the base into which a cartridge with a wire is placed. The design is extremely simple to manufacture, but it looks amazing in any interior.

Log floor lamp

A real masterpiece of LED lighting technology is quite easy to make with your own hands. You can create an original LED lamp using an ordinary log, the dimensions of which depend solely on the idea.

To make a lamp you will need wood glue, a transparent tube, wood varnish, LED strip, a brush, a hammer, a saw and a drill.

Manufacturing sequence

A well-cleaned and dried log must be cut into uniform rings of approximately 5 cm. A hole should be made in the center of each ring, corresponding in diameter to the tube with LEDs. It should fit tightly there. Holes are made in the lower and upper rings to cover half the thickness of the log. A small hole is made in the base for the wire. Each ring is varnished. Then a tube with diodes is inserted into the holes of each of the rings.

In order to make the interior of a modern apartment or country house original, interesting and effective, you can make lamps from wood with your own hands. Photos of the most unusual specimens made from branches, clothespins and other wooden elements are shown below. There are simply a huge number of options.

In order to create wooden lamps with your own hands, you need to use your imagination. Floor lamps made from clothespins are simple, cheap and original. For such a lamp you need a frame made of metal rods and wooden clothespins. Its external outline depends on the bending of the frame.

A chic chandelier made of branches will transform any room. It's very easy to make it yourself. Thin branches of some trees do not even need to be treated. The wire is drawn from the main source, wrapping around each branch, and approaches the lighting socket.

Having imagination and certain skills, you can make your own wooden lamps with your own hands. The photos given in the article are only a small part of what you can come up with. Moreover, wood is the most environmentally friendly material.

Wooden chandeliers can increasingly be seen in the interiors of country mansions. What is the reason for such popularity of such lighting devices? Of course, first of all, it is important to note the environmental safety of natural wood. This useful and high-quality material is ideal for making a wooden chandelier with your own hands.

Wooden chandeliers, made of wood, fill the room with a pleasant and soft light, allowing the owner of an apartment or house to completely relax after a busy day at work.

Wooden chandeliers have excellent technical and performance characteristics. Professional interior stylists note their unique wear resistance, as well as the possibility of making such lighting fixtures with their own hands.

Attention! A high-quality wooden chandelier has a fairly high cost.

It is not necessary to spend money on buying a ready-made lighting device, because you can easily make it yourself, turning your creative ideas and original ideas into reality.

In addition, a DIY wooden chandelier is a guarantee of uniqueness and individuality.

Reasons for choosing wood for making a lamp

In our age of scientific and technological progress and innovative technologies, polymer materials have become widespread, pushing natural wood into the background. Despite the variety of finishing and decorative materials offered by lighting manufacturers on the modern market, interior designers continue to use natural wood in their work.

An original do-it-yourself wooden chandelier, step-by-step instructions, as well as photos can be found in the video:

Natural wood has certain advantages. For example, this natural material retains its original characteristics during mechanical processing.

Advice! For relaxation, professionals recommend choosing spruce or pine for making a wooden ceiling chandelier. Doctors recommend choosing such wooden chandeliers for people with chronic respiratory diseases, as well as for asthmatics.

Also among the advantages of natural wood, we highlight the ease of processing. If desired, you can make antique or modern wooden chandeliers, and of any degree of complexity.

When choosing wood to decorate the interior of a living space, you can make it cozy and harmonious.

Wooden ceiling chandeliers will help add an accent to the room and emphasize the main idea chosen for decoration.

Advice! In order to put your creative fantasies into practice, you can experiment with the selection of wood species.

For example, “antique” wooden chandeliers can be made from oak or larch, and modern versions of lighting fixtures can be made from pine.

Among the advantages of choosing wood to create ceiling chandeliers, professional stylists note the excellent combination of this decorative material with other decorative options: glass, plastic, metal, fabric.

Disadvantages of wooden ceiling lamps

It would seem that with such a huge number of positive characteristics, wood should be an ideal option for the manufacture of ceiling lighting fixtures. But unfortunately, even wood has some significant disadvantages that should be mentioned.

Wooden chandeliers are easily flammable, as wood is not resistant to high temperatures.

Attention! It is strictly forbidden to use light bulbs in such chandeliers that will heat up during operation.

For safety reasons, professionals working with this natural material prefer to choose fluorescent or LED lamps, which cannot create fire hazards.

Among the disadvantages of ceiling wooden chandeliers used in rooms with high humidity, we highlight the instability of wood to negative environmental influences: moisture, temperature fluctuations.

Ceiling lights made from wood are susceptible to insect attack.

Advice! To provide your ceiling lamp with reliable protection from these factors, it is important to coat the finished product with a special protective impregnation.

Also among the disadvantages of choosing lighting fixtures made by hand from wood, we note their high cost. As it dries, in some cases the original appearance of the ceiling chandelier may also change.

If you take into account all these shortcomings inherent in wooden products, you can make an original and functional lighting device that will become the pride of the owner of an apartment or house.

Materials for work

To assemble a wooden ceiling chandelier with your own hands, you will need the following tools and materials:

• roulette;
• screwdriver and hammer;
• pencil;
• electric drill;
• hammer and pliers;
• antiseptic for processing wooden products;
• socket, light bulb, electric wire;
• decorative elements

Depending on which particular model of lighting fixture will be created, this list may be supplemented with other materials and tools.

There are certain rules that must be followed when starting work related to the creation of wooden ceiling chandeliers.

First of all, it is necessary to take care of the complete treatment of the material with a special antiseptic composition.

In addition, you need to pay due attention to the system for attaching the finished product to the ceiling surface. For example, you can choose an original metal chain so as not to be afraid that the chandelier will fall from the ceiling.

When connecting a wooden lamp, it is better to use the services of a professional electrician to avoid emergency situations.

When planning the interior of your home, you need to pay a lot of attention to little things, such as paintings on the walls, curtains, sconces, and so on, because it depends on them how stylish and cozy the room will look. Not the last place in the design of the apartment is occupied by the lamp. With its help you can increase or narrow the space, as well as give a special charm to the room. Stores offer a wide variety of lighting fixtures in a variety of variations - these can be floor sconces, miniature spotlights or a classic pompous design that occupies a significant part of the ceiling, but they are often quite expensive. To make the interior more unusual and exclusive, you can make carved wood chandeliers with your own hands. They will, without a doubt, become the main highlight of any space.

Advantages and disadvantages of wooden ceiling lamps

Handmade wooden chandeliers will decorate absolutely any home. Such designs look especially good in apartments with a rustic and brutal style, but by decorating the natural material with dark or bright paint, you can get a lamp that is suitable for high-tech or modern interiors. You can make your own lamps from plywood or from a single piece of wood.

Before deciding whether to hang a wooden chandelier on the ceiling, you need to familiarize yourself with all the pros and cons of such an item.

Advantages of wooden chandeliers:

1. Wood is easy to process, so it can take on completely different shapes.
2. Wood is the most environmentally friendly material; it not only does not emit harmful compounds, but also helps improve immunity.
3. Wooden lamps make the room more comfortable and create the impression of unity with nature for the people in it.
4. Hand-made wooden chandeliers do not require large investments, but at the same time they look very expensive.
5. A large number of wood species allow you to choose the desired color of the lamp without using paint.
6. A wooden ceiling lamp can be decorated with metal, glass or even stones.

A DIY chandelier made of wood is quite simple to make and looks very decent, but this material also has some disadvantages.

Disadvantages of wooden chandeliers:

1. Wood used in tandem with heating devices (which includes most light bulbs) must be treated with special means that protect this material from fire and damage by insects.
2. Exclusive species such as oak and mahogany are quite expensive. Therefore, in order to decorate your home with chandeliers from them, you will have to spend an impressive amount of money.
3. If you use untreated or poorly dried wood, the finished lamp may crack or change its shape after a few weeks.

Of course, wooden chandeliers have their drawbacks, but with proper processing and care, such accessories will serve you for many years.

Simple wooden chandelier

This hand-made wooden chandelier will fit perfectly into a modern kitchen interior in high-tech or modern style. It is a bar with several spotlights implanted into the cups.

To make a strip chandelier you will need:

• jigsaw or hacksaw;
• pliers and wire cutters;
• screwdriver;
• hammer;
• construction pencil;
• special protective compounds for wood;
• stain or brown paint;
• wooden board 20-25 cm wide;
• tape measure or centimeter;
• drill;
• drill for working with tiles;
• medium-width paint brush;
• cups and saucers 3 pcs.;
• rubber gaskets;
• wires;
• small light bulbs with sockets 3 pcs.

Before you begin work on the manufacture of such a chandelier, the wood must be treated with special compounds and allowed to dry completely. When choosing a material, it is advisable to inspect the board for knots and traces of insects.

Manufacturing

Master class on making a simple strip lamp for the kitchen:

1. We measure out 50-60 cm of boards and saw off the excess parts with a jigsaw.
2. We drill three holes in the places where the lamps will be located. The distance between saucers should be at least 10 cm.
3. We process the board with sandpaper. First you need to use coarse-grained sandpaper, and then fine-grained sandpaper.
4. Now you can cover the plank with stain. If oak or mahogany was used, then this step can be skipped.
5. We drill a hole in the center of each saucer and each cup.
6. First insert the cartridge with the wire into the cup and then into the saucer. Repeat this operation with the remaining cups and saucers.
7. Connect the structure of dishes and cartridges to the bar by threading the wires into the pre-made holes, and then secure it on the back side.
8. Mount the resulting chandelier on the ceiling.

A chandelier-bar will look perfect in the kitchen above the work surface; it is also ideal for dividing the room into a cooking and relaxation area.

Wooden wheel chandelier

This chandelier is more difficult to manufacture than the previous one, but it also looks more noble and impressive. The wheel-shaped lamp will fit perfectly into a rustic interior or a loft-style room.

For this type of chandelier you will need the following materials and tools:

• a wooden square assembled from boards slightly larger than the future wheel.
• protractor;
• large compass;
• metal ruler or building level;
• construction pencil;
• jigsaw or circular saw;
• glue;
• self-tapping screws;
• plywood sheet;
• narrow wooden boards;
• hammer;
• nails;
• iron rim;
• stain;
• metal chain;
• drill with a round attachment and drill;
• wires, sockets and light bulbs 4 pcs.;

Master class on making a wheel chandelier:

The finished wheel chandelier can be attached to the wall or hung from a chain on the ceiling. It is perfect for lighting a dining room or living room.

Such a wooden chandelier will become the main decoration of the interior of a country house, and will undoubtedly attract the attention of every guest.