Making a slide with your own hands is the best entertainment for children. Snow slide, making a snow slide with your own hands How to make a snow slide in the yard

Winter brings not only cold, but also new entertainment and experiences. Sleigh rides, skiing and ice skating are available. In order to give joy to your children, and to have some fun yourself, you should flood the yard snow slide. Before you figure out how to properly fill a snow slide, you need to understand where it is best to organize it. The chosen place should be safe so that you can have fun and not worry about possible dangers. The selected area should be free of trees, bushes, manholes and other objects that could cause injury. There should be no roadway nearby.

How to fill a snow slide with water - dimensions of the slide, angle of inclination

The height and width of the slide will depend on the free area, the available volume of snow, and your capabilities. If the slide is made for crumbs, then you should not build a structure that is too high. Convenient indicators are the ratio of height to length 1 to 4. In addition to the descent, you will need to roll out. This is a flat plane along which movement will be carried out until the skater comes to a complete stop. When creating a design, do not make the slope excessively flat or steep. At first optimal angle tilt -30-50. Next, as you descend, reduce the angle of inclination, you need to do this as smoothly as possible.

How to build a slide

To make the work easier, prepare large snow balls in advance. Lay out a wall of them, and fill the cavities between the balls with snow, use a shovel. Received snow mass tamp down well. As a result, you will be able to build a descent, railings and other elements. To make your slide convenient to use, do not forget about the steps. The optimal width dimensions are 40 cm. You can build low sides on the sides of the steps; they will be comfortable to hold on to when climbing the hill.

How to fill a slide with water

After you have built the snow structure and compacted it well, let it sit for a couple of days. During this time, the frame will be compressed and strengthened, which will allow it to be used until spring. Fill it up better evening when the sun sets and the temperature reaches -20C. If these conditions are not adhered to, the entire structure may “float”. Do not immediately pour the water out of the bucket; first, go around the entire perimeter with a spray bottle. Wait a couple of hours and proceed to the main filling stage, do it slowly. Use a little warm water. If voids form, immediately fill them with snow. When the slide has hardened well, go over the slide with a sanding board - this will make it slippery and smooth.

Using the information provided, you can easily create the coolest entertainment for your children. Show your imagination, work carefully and the result of your work will certainly please not only children, but also adults. Ice snow fun in your backyard is an opportunity for the whole family to have fun without leaving your backyard.

Winter is just around the corner, and for kids it's school holidays. Any parent wants their child to have fun and useful time during this period. Of course, walks are also important for children and adults. fresh air and family leisure. To prevent them from turning into a boring pastime, you can entertain yourself. For example, build a snow slide together with your children, and then have fun sliding down it. We will tell you how to do this in this article.

snow Hill

Since ancient times in Rus' it was customary to ride down the hills on a sleigh. This was a favorite pastime for both old and young. Those who live in hilly or mountainous areas are lucky, just wait for snowy weather and the slide is ready. And most importantly, you don’t need to make any effort. Well, if there is no hillock near your house, or you live in apartment building You can build a slide yourself. We'll tell you how to do this later.

DIY snow slide

Making a slide with your own hands is not that difficult. For this you will need:

• prepared site;
• snow;
• several shovels;
• water.

First, you need to choose a place for the future slide. It is best to place it on open area further from the roads. This is primarily a matter of the safety of the children themselves. If necessary, clear the area of ​​debris. The size of the slide is also important; a small slide will be uncomfortable for children to ride, while a very large one may not be safe for children. The height should be comfortable and preferably below the height of an adult. This will make it more comfortable for you to monitor and help your child. It is best to make the length 5 m, this is the most optimal length. The shape of the slide is also important.

Show your imagination and make it with a twist, or decorate it with an arch at the top. Children will have a lot of fun riding on a custom slide. The place has been marked, now you need to throw the snow in the shape of the slide and compact it. Everything must be done evenly and in several stages. The angle of the slide should be from 30 to 50 degrees. The slope angle can be adjusted by adding material. If the slide is intended for small children, then it must be made flat from the very beginning of work. For convenience, it is necessary to provide steps along which children will climb the slide. To prevent them from slipping, you can lay them out with planks. Along the length of the slope itself, you can make a small side of snow to prevent children skating from falling. After completing the main work, it is recommended to fill the slide with water. To do this, you can take a bucket of water and gradually water it starting from the steps. Then let the water freeze and repeat the procedure several more times until the surface becomes smooth. If cracks and holes appear on the slope during the pouring process, they must be filled with snow and watered. After this, it is recommended to leave the slide overnight, during which time the water will freeze and in the morning the children will be able to slide down it.

How to make a snow slide

Making a snow slide is quite simple. This will require a minimum of equipment, just a couple of shovels, pieces of plywood and snow. The snow slide has a number of positive aspects:

1. Children can be involved in the work, regardless of age;
2. no material costs;
3. pliable material gives great scope for imagination;
4. the ability to add new elements at any time.

There is only one drawback - it's seasonality. The slide will delight everyone only throughout the winter. The main thing is that adults and children can show their imagination and create something original. To simplify the work, you can build a frame from pieces of plywood. Secure them firmly and cover them with snow. Having made the descent and steps, you should take care of safety. Make sides along the edges of the slope and provide small handrails for ease of climbing the slide. After which the entire slide must be covered with water to form an ice glaze. It will give strength to the entire structure. Most upper platform structures can be covered with plywood for convenience and safety. After which you need to wait until the next day and you can safely start testing.

How to fill a snow slide

It would seem that it could be simpler to fill a snow slide with water. But, even here there are some nuances, the implementation of which will significantly simplify the work. For correct filling The following rules must be observed:

• you need to protect your hands from cold and moisture, for this we wear warm gloves and rubber gloves on top;
• It is best to fill the surface in frosty weather;
• best to fill warm water, it will harden faster.

It's not all that difficult. For pouring, it is best to use a regular garden watering can. With its help, the water will be more evenly distributed over the slide and the surface will be smoother. This process is quite labor-intensive. But a few hours of work are worth the happy children's eyes and ringing laughter. This will be the best reward for your efforts.

Snow slide

The snow slide can be made in different shapes and size. For example, you can build wooden frame with two descents. One steeper and longer for adults and older children, and the other with a lower angle and length of descent for children. After which the frame is filled with snow and the slide is ready. This structure will be strong and safe. And most importantly, it can be used in the warm season. Place sheets of tin or other sliding material on the slopes for the amusement of the children.

If you have imagination and free time you can build a slide for children with arches in the form of a log cabin. This slide has several descents. Children will have a lot of fun riding this slide. The main thing is that they will have a fun and active time.

If desired, you can beautifully decorate even the most ordinary mountain. For this you will need paints and brushes. On the side surfaces of the slide you can draw Christmas trees, snowflakes and winter birds (for example, a bullfinch). Such simple patterns will appeal not only to children, but also to adults. Kids will enjoy sliding down the slide and admiring the drawings on the way up. As you can see, making a slide is quite simple, and with a little imagination you can make even the simplest model beautiful.

This article talks about snow slides and how you can build them with your own hands. Advice is given on filling the resulting structure with water. Describes how you can arrange appearance structures. Using the advice in the article, you can quickly build a safe slide for children using available materials. Fill it with water correctly and, if desired, decorate it in an original way. Good luck with your work.

Find out how you can make a snow slide yourself in winter, how to properly fill it with water so that it freezes.

Agree that during the New Year holidays one of the best, most memorable childhood memories is the winter festivities. Making a snowman, sledding, skiing, and, of course, on the slides is a wonderful activity. The latter will be discussed in this article.

You will learn how to build a slide without difficulties at home, without any outside help. This slide will bring great joy to your children and even adults, and to make the work less boring, you can involve the whole family in it.

How to make a snow slide for children with your own hands?

It often happens that some problems occur during the construction of a slide. It collapses, falls apart, and pits and irregularities appear in the most inappropriate places. Next, you will learn how to make a slide correctly. So that it is durable, reliable, and most importantly, comfortable.

Materials for building a slide

To build successfully you will need the following:

1. Frost outside the window
2. A large amount of pure snow
3. Shovel
4. Broom
5. Quite a decent amount of water
6. Watering can, ladle
7. Positive attitude
8. Scraper or spatula

To build a slide, you need to follow a few simple rules:

Safety. Select safe place location future design. This is necessary so that your child does not get hurt during the descent, so that there is no tree, fence, road, bushes or other obstacles on the way. You should not create an object of entertainment under the roofs of old houses, from which an icicle, slate, brick, etc. may fall.

Slide height, inclination angle. Determine the height of the future slide based on the age of the children. For very young children, up to about three years old, a slide one meter high is enough. For older children, the most optimal, safe height is two to four meters. You should also adhere to correct angle tilt, such that it is no more than forty degrees.

Pure snow. When building a slide you need to use pure material. Because your child may smear things. Try to prevent children from getting hurt. The problem arises if there is debris, branches, sticks, etc. in the snow.

Creation order ice slide:

• Once the location and size are determined, we begin work. Using shovels you need to sketch required quantity snow. For example, a meter-long slide can be built in about thirty minutes. It is advisable to make the foundation of your snow slide using rolled large balls of snow. This way you will already have the base of the slide created.
• Next, we proceed to the formation of our slide. Using a spatula or broom, give it the required form. We make the optimal angle of inclination of the slide, straighten the area of ​​descent of the snow slide.

• If the slide is high, make steps using a spatula (scraper) or shovel. To make the steps stronger, strengthen them with your feet so that the snow settles, and only then form them auxiliary tool. They should be comfortable and small so that children can easily climb up.

IMPORTANT: The acceptable width of the step is at least twenty-nine centimeters.

Don't forget about the sides. Their height should be approximately ten to thirty centimeters, depending on the age of the child. The sides can be made using a shovel. Also, in order to give them shape it is necessary to use handmade. During it, do not forget to wear gloves as protection from the cold.

If you have the desire and time, then add decor. Decorate the slide with snowmen, various figures, and paint it with patterns. Or do everything to your liking, a lot depends on your imagination.

How to properly fill a snow slide with water?

We have come to the most difficult final stage - filling the ice slide with water. The slide must be filled in several stages - at least three times. Use cool water using a sprayer, watering can, or ladle.

You will need a broom; with it you spray an even layer of water over the entire surface of the structure. Make sure there are no irregularities, holes, or bumps. To do this, during pouring, you need to smack the set thin, fragile layer of ice with a broom. After the second stage, you have a rough crust of ice. For a more reliable result, fill the slide a third time, after which you will get a strong, smooth, and most importantly, reliable structure.

IMPORTANT: Fill finished design stands at a low temperature, from 10 degrees below zero. Otherwise, your efforts will be completely useless.

If you follow the entire sequence of work, you will get an excellent snow slide, which your children will be very happy about. If the winter turns out to be frosty, then the item of entertainment will last until the spring thaw.

Video: DIY snow slide

To make a snow slide, you need to choose the optimal place for it, away from the roadway, away from various obstacles, bushes, trees, fences, and so on. After choosing the location of the slide, you need to bring a lot of snow and make a big mountain out of it. The future height of our ice slide will depend on the height of this snow mountain.

Good height for small children - two meters, and for older children - three, four meters or more. The length of the snow slide can be from three to five meters, also depending on the length of the snowdrift. To shovel snow faster, use a stretcher and a wide snow shovel.

Before making a snow slide, you need to try to give the desired shape to our artificial snowdrift so that two-thirds of it is flat and one-third is not. Now we move on to forming steps on one side of our snowy mountain, and a smooth slope on the other side.

The steps are formed with a shovel and compacted with feet, while unnecessary and excess snow is thrown away. It is more convenient to form steps with a narrow shovel, as it is much more maneuverable in operation. The safe width of the steps is fifty centimeters. The slope is filled with cool water from a watering can or hose with a spray nozzle.

In the process of filling the slide with water, ice sides are formed along the edges, which will prevent children from falling out during winter skiing. A pile of snow is poured with water several times, after the first a thin and brittle crust is formed, after the second a rough frost forms, and the third time can be filled for maximum strength and smoothness of the surface.

Please note that the water should be cool or very cold, but not hot, as it can ruin the entire slide. If the surface of the slide is covered with bumps, fill it four or five times until it is perfectly level and smooth. Now the snow slide with your own hands is ready, you can happily ride along it with the breeze.

If such an ice slide needs restoration, it is necessary to bring more snow, re-form a snowdrift of the desired shape, fill the slope and renew the steps. If deep grooves have formed in the slope, you can fill them with snow and moisten them with plenty of water, after which you can ride on the slide again.

It is best to build a snow slide at temperatures up to eight degrees below zero. With more high temperature the snow begins to melt, and at lower temperatures, it is very hard and cold to work. You can slide down the ice slide on a piece of cardboard or special bright ice skates. Children under three years old on a snow slide require close supervision, attention and guidance from their parents; riding on a slide can be a very dangerous activity for them.

Surely, many parents want to please their child. IN winter time of the year great solution will make a snow slide in the yard with his own hands. Riding on it, your child will have a lot of fun during the winter holidays. You can even involve your baby in helping and make a slide with him - it's very fun and interesting. But to create such a design, you need to adhere to some rules.

What is needed to build a slide?

• Pre-prepared area.
• A pile of snow.
• Shovels.
• Water.

And, of course, the most important thing is desire.

How to make a snow slide: choosing a location

You should start this business by choosing a place for the slide. It is advisable that it be away from roads. For example, in the yard or in some public garden. This is primarily necessary for the safety of children. This area must be cleared of debris. Optimal size for a slide - from 5 to 7 meters. A slide that is too high and steep can be dangerous for children. But if it’s too small, it’s inconvenient to ride, and it’s of no use.

After the place has been chosen and prepared, you should throw the snow in the shape of a slide and slowly begin to compact it. The slope angle of the slide should not exceed 50 degrees. It can be adjusted by adding snow. How to make a snow slide so that it is comfortable for children to climb? It is necessary to build steps. To prevent anyone from slipping, they should be laid out with planks. For the safety of children, it is imperative to make sides along the entire length of the slope of the slide.

How to make a snow slide correctly: workflow

After all of the above work has been completed, you need to fill the slide with water. You should start pouring carefully from the steps. When the water freezes, you need to add more snow. If cracks appear on it while filling the slide, you should seal them with snow and water them again. Such manipulations must be done until the surface becomes smooth. The slide should then be left alone overnight and allowed to harden. The next day, children can safely start riding it.

You can make a snow slide during the thaw. At this time the snow is heavier and stickier. Then it fits more tightly. But in any case, the slide must be filled in frosty weather. Do-it-yourself winter slides bring joy to children, as does the process of work itself. Throughout the winter, you can improve and repair the ice track. However, the slides have one significant drawback- this is seasonality. They will be able to please children only in the winter season. During the warming period, the hill will melt very quickly, and nothing will remain of it.

Cool jumps

How to make a snow slide that will delight not only children, but also adults? You need to approach this matter creatively. Firstly, for the fastest construction you need to turn on your imagination. To give the slide the desired shape, you can make a wooden frame. For this you will need various boards which will then be covered with snow. If there are a lot of boards, you can make a high slide so that not only children, but also their parents can enjoy riding. It’s even better to make two descents: one for very young children, and the second for older children and adults.

Secondly, if there is little snow at the site of the future slide, the base can be made, for example, from car tires. They are piled up, covered with snow and filled with water. To make the descent, you can use wooden panels, cardboard or plywood. Instead of tires, you can take any other Construction Materials. The safest slide is a wooden structure filled with snow.

Thirdly, you need to fill the slide with water carefully. If you simply water it from a bucket, you can seriously damage the entire structure or at least leave holes and other irregularities on it.

How to make an ice slide out of snow with perfect flat surface? Using a rag, through which the water will be evenly distributed over the snow. Everything ingenious is simple! Very a good option- water the hill from a garden watering can. Can be filled using plywood sheet, from which water will flow and form a descent. How to make a snow slide with your own hands if you don’t have either? The most reasonable option would be to mix water and snow in a bucket until it becomes a paste. After this you need to apply this mixture thin layer onto the surface of the slide and level it with shovels. The descent surface will need to be monitored and maintained in order.

Decorations for the mood

How to make a beautiful snow slide? To create the mood, it is decorated accordingly. The way it is decorated, or in what form it is made, affects the mood of the children. If you have the desire and time, you can build a slide with arches in the shape of a hut or some kind of castle. Kids will enjoy this design.

The question of how to make a snow slide with your own hands should be approached in advance. As a rule, winter slides are made in December, and people ride them mainly during New Year's holidays. Children will be very happy if the slide is painted with appropriate pictures. By showing your imagination, you can figure out how to make a snow slide for children and adults to awaken Christmas mood. For example, it wouldn’t hurt to draw snowflakes or a Christmas tree with a star on the top on the hill. Better yet, make some kind of snow sculpture or snowman next to the slide. It's so great when children are happy!