Decorating cast iron batteries. How to close a radiator: ways to properly hide a radiator with your own hands (105 photo ideas). method - painting

Heating radiators cannot always serve as interior decoration. Therefore, they have to be hidden, decorated with all possible ways. Let's try to figure out how to do this beautifully and correctly.

Features and Requirements

Decorating heating radiators is not like that simple task, as it might seem at first glance. It is necessary not only to hide the unsightly radiator, but also to maintain a comfortable temperature in the room. Obviously, closed batteries provide much less heat, and access to them becomes difficult.

In order to properly close the radiators and not reduce heat transfer (or at least reduce it slightly), you need to understand how radiators heat the room and on what principle they work. And choose the decor so that it represents minimal interference when the batteries perform their functions.

Removable or attached screens that do not have solid fastenings are well suited for this. This is necessary so that the radiator can be accessed at any time. Such a need may arise unexpectedly, and if the battery is mounted into a wall, a plasterboard box, or covered with a screen “tightly” attached to the wall, the structure will have to be broken. It will not be possible to dismantle it without damage.

Another important criterion when choosing decor is how much it will affect heat transfer. Heating of the room occurs due to the release of infrared radiation (it heats objects) and convection (it directly heats the air).

Solid screens, devoid of gaps at the bottom and top, will become a serious obstacle for both the first and the second. The best option There will be perforated, carved or lamella screens that do not cover the battery either from above or from below. Or closing slightly.

In order for the air to warm up evenly, it must be able to freely enter from the bottom of the battery, pass through it and exit from the top already warm. A tightly “sealed” radiator does not give it this opportunity, which is why the temperature drops. As for IR radiation, it simply cannot pass through a solid, impenetrable screen, which provides almost one hundred percent thermal insulation of the battery.

Recently, you can see that batteries are often covered with glass screens with photo printing. Of course, such a solution has high decorative properties However, the temperature in a room equipped with such decor drops significantly.

The optimal solution for any interior would be a wooden perforated or carved screen. The main thing is that it has as little continuous surface as possible and as many holes as possible to allow air to circulate freely. In addition to the fact that wood fits harmoniously into almost any interior style, it is also necessary to highlight its environmental friendliness. When heated, it will not release any harmful substances. On the contrary, when exposed to heat, wood releases essential oils that have positive influence on human health (of course we're talking about about natural wood).

Economical ways

To hide old heating batteries, it is not at all necessary to use expensive materials and designs. There are quite a few budget ways close unsightly radiators while maintaining high heat transfer rates and easy access to the system.

These methods include:

1. Coloring. Even old, Soviet models of batteries can be turned into a stylish element of the interior by painting them to match the walls or, conversely, in a contrasting color. The costs are minimal, and the benefits are obvious: the possibility of quick access to the radiator remains, convection is not hampered in any way, and the room remains comfortable temperature. Such radiators will fit into any interior, from modern loft to the classics, the main thing is to choose the right color.
2. Textile. The simplest thing is to cover the radiators with curtains that go down to the floor. The main thing is to ensure that there is no possibility of the fabric catching fire from too hot batteries. Or - if the option with curtains is not entirely acceptable - you can pull it over wooden frame fabric that harmonizes in color with all other textiles in the room, and cover the radiators with this screen. Air easily passes through the fabric; it does not present any obstacle to this, which means that heat transfer will not decrease.
3. The use of materials such as plastic, MDF panels, and drywall will also be inexpensive. However, they also have significant drawback– reduction of heat in the room. And from the point of view of environmental friendliness, these materials leave much to be desired. The same plastic, for example, is better used in the bathroom to turn off the tap, in the kitchen, that is, in rooms with high humidity, where the same wood, the same metal will quickly become unusable due to external factors. Boxes made of MDF panels or plasterboard have good thermal insulation properties, what in in this case absolutely not necessary. And it will be difficult to get close to the system.

Certainly, low cost- a significant advantage of the material, and for many it is decisive. However, we should not forget that its main function is to provide not only the aesthetic appeal of the heating system, but also warmth in the apartment. Therefore, you should not focus solely on price.

Good combination Wooden structures have accessibility, aesthetics, environmental friendliness and the ability to transmit heat. A simple lattice made of narrow slats, which are sold in any hardware store, can effectively hide radiators and will not interfere with them normal operation. In addition, such a solution will look natural in any interior. It is not for nothing that wood has been used since ancient times to decorate houses. Its unique natural aesthetics, the warmth and comfort that it brings to the home are still appreciated and in demand.

If you choose as a background for a carved wooden panel a metal sheet– copper or aluminum – this solution will bring double benefits. The wood will take on a decorative function, and thanks to the metal, the temperature in the room will not only not decrease due to the closed radiator, but may even increase.

Popular solutions

Currently, there are many ways to hide old cast iron radiators under the window. Screens from a wide variety of materials, niches, painting, mounting into the wall - options for every taste. But if decorating heating radiators in a living room, bedroom or nursery is quite simple - just choose a solution that will harmonize with the overall style of the interior - then in rooms with characteristic conditions (for example, in the kitchen, bathroom) this is more difficult to do.

For these rooms it is necessary to select a material that will withstand and high humidity , and temperature changes, and possible exposure to steam, chemical substances. And with all this it will be non-toxic. The best option would be to paint the radiators to match the walls or in a contrasting color. This method of decorating pipes is the most common in bathrooms.

As for the other rooms of the house, everything depends solely on the imagination and budget of the owners. But the basic requirements for radiator screens must be met in any case. After all, their main task is to hide unsightly heating elements without compromising heat transfer. Therefore, any screen must provide free air circulation and IR radiation. At least create minor obstacles to this.

The now popular glass screens, of course, are highly decorative, look great in the interior, but they significantly reduce heat transfer, which means they help lower the temperature in the room. This decor can be used if heating is carried out in some other way, for example, using heated floors.

Quite often you can find such a solution - radiators are mounted inside the wall, and a small window (or two) is left behind a grill for the passage of heat. Not only does the temperature in the room drop significantly in this case, but also access to the system becomes almost impossible - to do this you will have to break the wall in the literal sense of the word.

The same applies to boxes made of plasterboard, plywood, MDF, chipboard and other similar materials. Reduced heat transfer, difficult access to the system versus decorativeness. Everyone makes a choice for themselves.

Screens made of metal – copper or aluminum – are now gaining popularity. Such models not only will not lower, but may even increase the temperature in the room. Heated by the radiator, such screens themselves act as a battery and additionally heat the room.

If the room is covered with wallpaper, the heating elements can be decorated using leftovers. Cutting them into strips and gluing them onto radiators (of course, heat-resistant glue), you can get a wonderful decorative element that will harmoniously fit into the interior at minimal cost.

In a children's room, you can generally give free rein to your imagination, or you can involve the inhabitants of the room in the process. Children will happily take on the task of decorating their own home and will tell you how they would like to decorate the radiators. Favorite cartoons, fairy tales, your own imagination, in which a room is not a room at all, but a ship, tank or racing car. All this can be used when decorating radiators.

To decorate old heating radiators, you don’t have to spend a large number of funds, effort and time. You can simply paint them. Freshly painted batteries will look good in modern interior, such as, for example, a loft, both in a classic and in a soft pastel room. The main thing is to choose the right color.

The same loft is industrial style, and its color scheme is appropriate. The most commonly used is black or White color. One of them can be used to color batteries. Elements painted in a contrasting color - black on white or white on a black background - will look especially impressive.

For the more prosaic, calm interiors this is unlikely to be suitable - after all, it still emphasizes the heating system, highlights it, and does not hide it. In an industrial loft this is what you need. But, for example, in classic interior it would be inappropriate. Here it is better to paint the batteries to match the walls so that they blend into the background.

Heating radiators can be decorated with paintings. Such elements will look good in a child’s room, emphasizing the dynamic, active, unusual atmosphere, inherent in this room.

In the bathroom, you can put the pipes in a plastic box. It would be irrational to use wood or metal in this room - the materials will quickly become unusable, and the design will have to be changed. And plastic can easily withstand the high humidity of this room. However, plastic is not suitable for the kitchen; here it is better to give preference to traditional materials.

The decor of a heating system implies not only the camouflage of its elements, but also the possibility of easy and quick access to any of its components. This is one of the most important criteria choices that need to be followed when choosing the design of radiators.

Another important factor is heat transfer. But here you can resort to a little trick. A foil foam insulator hung on the wall behind the radiator will reduce heat loss by twenty times.

But it must be attached to the wall, and not just put the battery. In this case, a distance of at least two to three centimeters should remain between it and the piece of insulator.

It is not advisable to cover the elements of the heating system with boxes, hide them in niches or mount them in walls. If another option is not possible, it is necessary to provide the box with a door to ensure the fastest and easiest access to the system at any time.

Modern industry produces heating radiators that are significantly different from Soviet models, which everyone is so eager to hide or change. These are not only strictly geometric white radiators. These can be models of almost any shape and size. Such batteries do not have to be hidden or covered; on the contrary, it is customary to put them on public display, hang them in the center of the wall and show them to guests as a bright, unusual accent.

Modern radiators are a spectacular decorative element that is attractive in itself. Even simple white models have their own aesthetics. They don't have to be hidden at all. They will cope perfectly with the role of discreet, but stylish elements decorations that also perform a practical function - they heat the room.

Examples in the interior

Decorating or hiding radiators in a room beautifully so that they are not a “fly in the ointment” and do not spoil the entire appearance of the room is not such a difficult task. Modern materials make it possible to solve this issue with minimal costs.

Vertical, horizontal, sectional, copper, cast iron – modern market offers a wide variety of radiators to suit every taste.

A battery with a bright, cheerful color, such as yellow, will look good in a children's room - it has a positive effect on nervous system and the emotional state of a person.

New models, unusual for the eyes - vertical radiators. They are located vertically on the wall and can occupy the entire height from floor to ceiling. This element looks quite stylish and does an excellent job of maintaining a comfortable temperature in the room.

One of the elements of the rooms in each apartment are heating radiators. However, they look rather unpresentable even if repairs are carried out. This boring piece of furniture depresses many with its unassuming appearance. Therefore, many are looking for solutions to change it. Someone is replacing cast iron radiators with flat ones that have a more presentable appearance. They easily fit into the interior of the room without standing out.

If you want to change the appearance of the heating radiator in your apartment, you want it to be in harmony with other elements of the interior, then the technique of decorating unpresentable objects into a real work of art will help you with this. To do this you will need to perform a number of manipulations using plain paper.

The technique of transforming central heating radiators is called decoupage. It is available to every apartment owner. Even without any special skills, you can create the decor of a heating radiator with your own hands. The most important thing is to have patience and necessary materials to change the appearance of the battery.

A little about design technique

Decoupage - beautiful word, which denotes the application technique. If it is carried out according to all the rules and high-quality materials were used during it, then in appearance it is quite comparable to real painting. For those who have only recently begun to explore the world of various homemade crafts and ideas, the technique of decoupaging heating radiators with your own hands can be the simplest solution for changing the usual appearance of a heating radiator.

History of appearance

Decoupage - French word and translated it means “to cut out.” The decoupage technique involves decorating various objects using motifs cut out of paper.

This technology originated in China, where peasants first began to use it. They used it to decorate ordinary household items, using paper in colorful shades. Common items acquired bright spectacular look. Along with lacquered furniture, this technique of decorating objects came to Europe after a while. The fashion for everything oriental greatly contributed to the spread of decoupage on the European continent.

Using decoupage technique three-layer napkins- the most popular material. That is why this technique is often called the napkin technique. Its use in the design of interior items and various furniture allows you to refresh the look and bring them back to life. They become more colorful and acquire attractive appearance, perfectly complementing the room.

Decorating the battery: materials

Those who have seen furniture decorated using the decoupage technique often have a desire to do something similar with interior elements in their apartment. If you also want to try yourself in this new business, then, of course, the question arises: how to decoupage heating radiators. It is worth saying that there is nothing complicated here.

If you want the battery in the apartment to purchase effective and bright look, has become a design device with a more original look, has lost its boring appearance, then in this case you first need to prepare the necessary materials and tools to implement this technique:

• Card for decoupage. If you don't have one, regular napkins with a pattern that you like best will do.
• PVA glue;
• White enamel;
• Acrylic paints;
• Heat-resistant varnish;
• Sandpaper;
• Set of brushes.

Fans of this technique recommend using PVA construction glue to complete the work, and not the one offered in office supply stores. Construction composition has more high properties in terms of gluing. In addition, it is distinguished by higher quality.

When starting work on decorating a cast iron battery using decoupage techniques, you must first start preparing the radiator. It involves processing the heating device, which includes:

While the battery is drying out, don't waste your time, but prepare motives for the applique. If you are using a ready-made card for decoupage, on which any landscape is applied, then you should measure the dimensions of the battery and each of its sections. Then these dimensions must be applied with reverse side cards, and then cut out motifs from them.

Decoupage with napkins

When using this decorative element, you should do it differently:

• The parts you like are cut out in the required quantity;
• Then they are tried on at the place of future placement. This is necessary so that when the battery is completely dry, you can start decoupage immediately, without taking breaks in your work to search for new decor.

Let's create on the battery

After the white enamel has dried, using the prepared motifs and tools, you can begin decorating the battery. It's best to do this in a top to bottom direction. It's more the right approach, since during the pasting process paper products can increase in size.

If you start decorating the battery from the top, you can be sure that the edge will be neat. And if unnecessary parts appear, they can be easily tucked in or even cut off.

For DIY decoupage you can use:

• individual motifs of small size;
• flowers;
• animal figurines.

In this case, the gluing process is better start from the center of the motif, gradually smoothing it towards the edges. There is no need to rush while working. It's best to stick to a medium pace. In this case, the paper will not have time to dry. In addition, you will avoid tearing the soggy pattern.

When all the paper stickers are in place, you can proceed to adjusting the edges of the design. To do this, we use acrylic paints, if necessary and you have the abilities of an artist.

Both the acrylic paint and the layer of PVA glue applied to the paper must be allowed to dry. When the surface will be completely dry, you can use heat-resistant varnish and cover the battery with it. Having finished with this, the decoupage can be considered complete. Now you can appreciate all the splendor of your new battery, which has turned from an ordinary heating device into a real masterpiece decorating the interior of your room.

If you like this kind of work on decorating batteries, then you can move to another room and, using the same tools and materials, decorate another battery in your apartment. Perhaps the old radiator located in it also needs decoration. Having completed the work efficiently, you can get another original item interior design in your home that will delight not only you, but also your guests.

Conclusion

If you want your home to look original, then you don’t have to buy expensive wallpaper or spend money on luxury furniture. You can decorate it yourself, spending a minimum of money. Decoupage will help you with this. This design technique is available to everyone. The main thing is to have a desire to change the usual appearance of your home. By paying attention to boring radiators, you can show your imagination and create heating radiators that are unique in appearance and beauty. They will be a wonderful addition to the interior and will harmonize well with other interior elements. Decorating batteries using the decoupage technique will make them the highlight of the interior of your apartment. So don't miss this opportunity.

When starting renovations in your apartment or house, at a certain stage the question arises of how to hide the batteries. In fact, you can do it yourself, and not spend additional money on builders.

What to consider when masking a battery

Before you start masking, you need to know a few important nuances:

• The first thing you need to understand is that with any method there will be heat loss.
• Convection air flows should not be blocked by anything; this is the only way to maintain uniform heating of the room, and the windows will not fog up.
• For various emergencies, it is worth considering in advance free access to threaded connections and the radiator - this could be a window or removable design, for example, a door with hinges.
• For repairs, the faucet, thermal head and other elements of the heating system must remain in good accessibility.

The best ways to beautifully hide radiators

There are several ways to hide batteries; in this section we will look at the most popular and effective ones.

It is by far the most practical and popular method; most often this design is made of metal and has its advantages:

• simple installation;
• heat exchange remains the same;
• can be made with rounded corners, which reduces the risk of injury.

Glass screens

A screen made of glass will become interesting and stylish solution, especially for those who choose minimalism or modern style in interior design. Photo printing or various patterns can be applied to the glass, but this method is not budget option. Installation is carried out on a screw holder, but you will have to drill holes in the wall. However, the heating radiator will be stylishly protected. This option will fit into any interior.

Box screens

Box screens are an excellent option for decorating radiators.

• They will help to completely hide the battery.
• The box can become a piece of furniture.
• Erans are easy to install and easy to care for.
• Protect from burns or other injuries.

The photo shows an original green wooden box in the children's interior.

Let’s not forget about the most popular way to hide batteries - simply hang them with opaque or translucent curtains. Using this method, over time you will even forget that there are pipes and a radiator behind the curtains. The main thing is to choose curtains that will look harmonious and not show everyone that there is something behind them.

Painting the walls in color

How to hide a heating radiator on the wall if other designs are “prohibited”. There is only one way to paint it the same color as the wall.

Wood frame

Wood will create coziness and warmth in the apartment, and the camouflage of the battery will be elegant and beautiful. This option is for those who are furnishing their home in eco-style using natural materials. These ways to hide batteries can be used as a stand for home decor.

In the photo they are normal wooden blocks stylishly hide the battery in the kitchen.

Built in furniture

Another common way to cover a radiator is custom-made furniture or built-in furniture (shelves, cabinets, folding tables, seating).

Hide the radiator with furniture

Arrange furniture, such as an armchair or desk, so that it covers the battery. A cast iron radiator is not attractive to many, but pieces of furniture can hide it.

Replace with designer model

For those who do not want to invent anything, unique design methods hide batteries that already initially have a beautiful appearance and you simply don’t want to hide them.

Original ideas

There are many creative ideas, which can turn batteries into a decorative element:

• Forged products

• Painting and decoupage of batteries

In the photo, with the help of a beautiful painting, the battery has merged with the wall.

Hide with drywall

Separately, I would like to talk about how you can hide batteries using drywall. It is immediately worth noting that the material has its disadvantages, however plasterboard construction still very popular for renovations.

• The material is environmentally friendly and is not subject to combustion.
• You can find several varieties of this material on the market.
• This camouflage option is budget-friendly, and installation can be carried out in different ways, in a way that is convenient for you.
• Also, it is drywall that will allow the apartment owner to come up with any design, which will help not only close the pipes and radiator, but also make additional elements decor.

The downside is that drywall is afraid of external influences; if you do it carelessly, it is quite easy to break or pierce it. And if a breakdown or leak occurs, the entire finish will have to be replaced again, but this material is cheap.

Do-it-yourself installation of a plasterboard box

In order to close the battery, you need to measure it, and then buy metal profiles and other additional products.

• What materials are needed: plasterboard sheet 12 millimeters, metal profiles 27x28 and 60x27, self-tapping screws for plasterboard and metal, dowel-nails size 6x40, construction sickle, perforated corners.
• Tools: screwdriver, hammer drill, metal scissors, stationery knife, construction stapler, pencil, tape measure, building level.

Attention, for construction plasterboard box There is important requirement: the window sill needs to extend beyond the radiator by at least 3 centimeters.

Work order:

Masking heating pipes

It doesn’t matter whether it’s an apartment or a house, a bedroom or a kitchen, I would like to have it everywhere good repair. Questions immediately arise: how to beautifully hide heating pipes and how this can be done with minimal cost and maximum efficiency? At the same time, the method of disguise should be truly invisible and unnoticeable, fitting into the room.

The pipe can be hidden inside the wall, or it can also be closed into the floor. Remember that the old heating system should not be hidden in this way; this option is possible after a complete update of all elements.

Box on frame

It is best made from wood, plastic or plasterboard. Do not place the heating pipes close together; there should be at least three centimeters between the box and the pipe.

Hide behind decor

Pipe decoration various options, for example, wrap it with jute rope. But remember that this reduces heat transfer. Many owners decorate pipes with flowers; this can be done using bamboo with leaves. Only imagination should work here, even old pipe may look completely different.

Painting to match the color of the walls

The easiest and most practical method is to paint the radiators or riser in the same color as the walls, but the heat generation will not be reduced.

In the photo in the kitchen interior, the pipes are painted to match the blue walls.

Hide under the floor plinth

It was a good invention floor plinth, in which you can easily hide batteries located horizontally and low to the floor.

Photos in the interior of the rooms

Kitchen

Kitchen is perfect room, in which all ways to hide batteries will become practical and convenient. If the room is small, then you can hide the battery using beautiful table top or make one folding table, which will unfold when appropriate.

Factories metal-plastic structures offer big choice beautiful window sills large sizes, which imitate stone, wood and other materials. A modern window sill does not break under weight, is not afraid of external factors, is easy to care for, wipe clean, is not afraid of scratches, and so on. You can hide any type of battery in this way, including cast iron.

In the photo, wooden boxes are used to disguise the radiators.

Living room

If the radiator is in a niche, then wide window sill will help create a work area.

You can place souvenirs, vases or potted flowers on the constructed wooden box. You can also cover unsightly radiators in the living room with thick curtains.

The photo shows a modern living room. In order to hide the radiators mounted wooden structure, which also serves as a place for relaxation, storage and decoration.

Bedroom and children's room

In the interior of a bedroom and children's room, batteries can be used as another place to relax, a tabletop for decorative elements or workplace.

Bathroom

You can hide the pipes in the bathroom using a louvered door, plastic grilles or a cabinet with opening doors.

We hide heating radiators using wooden, glass or plastic screens.

On the picture

Hallway

For radiators in hallways, glass screens or wooden boxes are suitable. In a small room, covering the battery is only necessary from a practicality point of view. This could be a locker for storing shoes, or the battery will become a small coffee table where keys and other necessary items will be stored.

There are a lot of reasons why you just need to paint radiators: major or cosmetic repairs of the room, replacing or updating an old heating battery, or, for example, the old color does not suit the new kitchen interior. In addition, chips often form on batteries that need to be painted over. In general, the reasons may be different, but how to properly paint batteries and not lose their thermal conductivity, read our article.

Why paint the radiator

In our harsh climate, we cannot do without additional heating sources. Of course, modern technologies do not stand still and more and more often systems are installed in houses, but the batteries we are used to can still be found in many houses.

It’s not easy without radiators in our climate. Such cast iron, bulky structures are appropriate only in industrial style loft.

Batteries, no matter how useful they are in winter time years, are constantly subject to criticism. Their design rarely fits into the interior of the room.

Alternatively, they can be hidden behind false kitchen panels, but in this case you risk “losing” some of the heat.

In addition to their bulky and awkward design, batteries are not easy to care for. Firstly, they perfectly collect dust, which needs to be periodically “swept out” using all sorts of tricks. But periodically they need to be painted, which is even more difficult. Let's look at how to do this correctly step by step.

Painting the battery outside the heating season

Preparation

The first step is to remove old paint. Due to the fact that the design of the battery makes many of its places difficult to reach, it is not possible to clean it the old-fashioned way using a metal brush.

A soldering iron or hot air gun will not work. Since in the first case the structure can be damaged, and in the second it is simply useless.

The best way to clean a battery from old paint is a variety of chemical removers.

Paint remover can remove paint even in hard-to-reach places

Of course, this method also has its drawbacks, but it still gives the best results. The remover works on the principle of a solvent. It penetrates the paint layer, softens it and then scrapes off the old paint quite easily with a putty knife or metal scraper. Among other things, the remover does not damage metal or wood, so it can be used before batteries.

When working with the substance, hold the bottle with the neck away from you so as not to accidentally inhale aggressive vapors of the liquid. The room must be well ventilated.

How to paint batteries:

The process of painting radiators

• apply wash;
• remove old paint;
• rust must be sanded off;
• treat the battery with a degreaser (white spirit or slightly alkaline solution);
• if necessary, apply a primer;
• After drying, you can apply the main color.

1. Batteries should only be painted when they are cold.. Therefore, it is better to postpone all work to a time when heating season has already ended. If the need arises in the autumn-winter season, turn off the valves and wait until it cools completely.
2. If you have to apply paint to warm radiators, use a spray can or apply very thin layer. The whole difficulty of applying paint to a hot surface is that brush marks remain. In addition, if the paint is changed, the batteries will become stained.
3. Radiators can only be connected after the paint has completely dried.

Interesting colored batteries will become a highlight of the kitchen

The room must be ventilated. If this is not possible, use a respirator.

How to choose the right paint for heating radiators:

Choosing the Right Paint

When choosing paint for heating radiators, you should take into account several requirements that the product must meet:

1. Heat resistance. Since batteries are, in principle, a heating device, the paint must be heat-resistant. Keep this in mind when choosing paint that is resistant to high temperatures.
2. Non-toxic. When heated, the paint may emit an unpleasant odor and toxic substances which can cause allergies, headache and even poisoning.
3. The shine of the paint is provided by acrylic, but it is worth remembering that when painting the room there will be a rather pungent odor. Unpleasant smell may not ventilate for quite a long time - the room must be ventilated for several days. Comply with paint

It is worth noting that acrylic paints are among the most durable and resistant. Besides acrylic paint wear-resistant and not subject to abrasion.

How to choose a beautiful color for painting or drawing

Classic color for radiators: white or silver. But if you wish, you can paint it in any other color.

Classic white batteries can be decorated in interesting ways

A battery painted with bronze or copper paint will look very interesting in the kitchen.

Dark-colored batteries dissipate heat better

Dark-colored batteries dissipate heat best. Alternatively, you can finish back wall, which gives off heat perfectly. If the radiators in your apartment are not too hot, choose a dark palette for them. Chocolate, dark gray or marsh batteries will look good. You can draw a still life or landscape on the batteries, or make one. The most interesting thing will be the flow of the pattern onto the battery.

Interestingly designed batteries will become the highlight of the kitchen

If you approach the coloring of batteries creatively, you can turn this awkward element into an interesting design move.

Decorate your batteries in a beautiful style

How do you like this Khokhloma

Simple, but tasteful. Can you draw? How do you like this “canvas”

Currently, cast iron batteries are increasingly being replaced with aluminum or bimetallic ones, which have a neat appearance and do not go far beyond window hole. But in many apartments they are still installed cast iron radiators or accordion, which do not add an aesthetic appearance to the room. The question of how to decorate such a battery arises for many who start making repairs. There is only one way out - try to hide the batteries in the interior of your room with your own hands using some decorating techniques. In addition to radiators, a lot of trouble is caused by the pipes that go to the radiators and also look unsightly against the background of the walls updated after renovation.

The radiator does not always need to be hidden; sometimes it can turn into a house for a cat, as in this photo:

House for a cat

3 ways to make a radiator invisible

Radiators in the interior can be integrated quite harmoniously; there are several such techniques.

1 way - screen

The easiest way to hide the battery is to place it behind the screen. Screens are made from a wide variety of materials. These are also simple metal constructions and wooden screens, which can be made from valuable species trees or rattan, these are suitable for most exquisite interior. If you prefer a modern style, you can purchase glass screens. Such screens will not only hide unwanted elements, but can decorate the room.

Instead of a screen - a glass picture

It is not possible to purchase the necessary screens in all cities; it is better to do this through some online store.

If you don’t want to spend money on a purchase, you can make such a screen yourself. You can hide the heating radiator by installing a plasterboard box or hiding the heating radiators behind a false wall. In this case, be sure to provide holes through which warm air will enter the room. Fortunately, there are materials in stores that will allow this to be done. Aluminum profile will be needed for the frame, and drywall or plywood will be used as the main material.

Method 2 - curtain

You can hide heating radiators not only behind a screen, but also behind a hand-sewn rag curtain. This option is acceptable if the heating radiators are recessed deep into the wall opening. To not do complex system fastenings, the curtain is attached with Velcro to the window sill. The fabric can be matched to the wallpaper. And in one apartment I saw that instead of curtains they had installed vertical blinds.

Fabric screen

Method 3 - painting

Another option for decorating a battery is to change its color.

If you paint the radiator to match the walls with your own hands, it will be less noticeable. This technique works better with modern radiators, such as aluminum ones. Cast iron will still stand out against your wallpaper or paint. But, nevertheless, this is a way out.

The color almost blends with the wall

Nowadays it is common to combine several textures of materials or highlight the elements of a room with different colors. If you're in a wall window opening highlight it with a variegated pattern to match the main color of the room, and also paint the battery variegatedly, the effect of invisibility will increase. Only a mottled spot will be visually striking. Or you can come up with a pattern for the entire opening under the window, part of this pattern will be the heating radiator. This is called airbrushing; usually such interior paintings are done by professionals. This idea is suitable for a children's room or kitchen. You can paint and decorate a heating radiator with your own hands together with your children. If you don't know how to draw, you can small parts apply using stencils, which are sold at any stationery store. These could be vegetables, fruits or small animals.

Painting on the battery

Another way is decoupage using designs from ordinary napkins. How to do this, watch the video:

Removing the pipes

A separate issue that will have to be resolved is where to put the heating pipes. Most The best way, V initial stage repair, these pipes will sink into the wall. You will have to change the configuration of the pipes, direct them towards the wall using an adapter, then drill a recess and hide the pipes there. This is a rather labor-intensive process; it is better not to do this work yourself, but to hire a specialist. If you hide it in the wall, you must be absolutely sure that the pipes good quality and new ones, otherwise they will leak and all your work will be lost. Pipes should be additionally coated with waterproofing. Under no circumstances should they be hidden in the wall. metal-plastic pipes with fittings, only iron. When thoroughly laying pipes, it is also necessary to take into account that the heat transfer in the room may decrease, but in the interior they will be invisible.

We use drywall

Drywall can also help you out when masking pipes. There are two options here - make a box or close it from floor to ceiling so that you get additional wall. The disadvantage of such a false wall is that small apartments part of the area, which is already small, is taken away. A self-made plasterboard shelter is the best option used in the interior, as it makes it easier to reach the pipes if plumbing repairs are required.

False wall made of plasterboard

As you can see, there are many options for masking radiators, but every home is different, so think about it and try it to suit your interior. Good luck!

domogreev.ru

How to decorate heating radiators with your own hands

Appearance Modern batteries are not very diverse. They come in sectional, tubular, and decorative cast iron radiators. All heating radiators differ in height, diameter and configuration. There are tubular batteries where the sections are arranged horizontally. An ornament consisting of plant or geometric elements is applied to their surface. This option is suitable for interiors in eclectic, classic, and modern styles.

They decorate heating radiators for a house or apartment, as well as small restaurants and cafes. Let's consider the types of radiator decor.

We decorate heating radiators for the home

You can decorate both new and old cast iron radiators. There are several ways to decorate:

• painting;
• decoupage;
• decorative panels.

When painting batteries, you need to choose paints that are resistant to heat. You can paint the entire battery one color or make a gradient. For example, the first section of seven will be painted white, and the last one will be painted white. dark blue colors. The middle sections will gradually gain saturation. To make this option, first the first section is painted white. Then a few drops of blue color are added to a container with white paint, mixed thoroughly and the paint is applied to the section. A few more drops of color are added to the next section and this is done until the last dark blue section.

The simplest option is to paint the radiator with one color, which will match the shade of the walls or have a contrasting color. Before choosing a contrasting color, it is advisable to look at similar examples on the Internet or in design magazines. This will allow you to make the right decision.

For the interior of a kitchen or children's room, a suitable option is to paint the batteries in different colors. For example, three sections are colored in yellow, four in orange color. The remaining three sections are painted red. For this decoration you need three cans of paint. Of course, the color combination can be anything, the main thing is that it harmonizes with the color scheme of the room.

By choosing the decoupage method, you can decorate the battery in a short period of time. Before starting work, you need to clean the surface, degrease, prepare materials and put unnecessary paper under the battery.

To work you will need:

• multi-layer napkins with a pattern or cards for decoupage;
• scissors;
• PVA glue;
• soft brushes large diameter;
• a bowl of water;
• Heat resistant varnish.

The surface of the battery must be washed with soapy water and dried. Multilayer napkins need to be disassembled into parts. For work you will need upper layer with a pattern, the pattern you like is cut out of it. Then apply PVA to the surface of the battery with a brush, if used. construction option glue, then you need to add a little water to it. Then you should carefully apply part of the pattern and use a dry soft brush to remove all air bubbles, along with extra glue. If necessary, coat the edges of the napkin with glue. Gradually you need to glue all the parts and wait for them to dry. Then you need to apply varnish to the surface.

Screens for decorating batteries

The screen for the heating radiator is a good option for decoration, it also allows hot air flows to pass through well. Screens are:

• metal;
• wooden;
• glass.

Metal screens have different perforations, and there are also mesh screens. To order, they are covered with color or monochrome photo printing. They transmit heat well and are easy to clean. Such screens come in any size and parameters.

Wooden screens can be without a top or with a shelf, which is used for decoration; there are also models that imitate pieces of furniture or a fireplace. Wooden panels must have a large number of holes, otherwise heat will remain between the radiator and the screen. Decorative mesh with holes is used as a screen different diameters.

For apartment interiors in modern styles screens made of glass with special fastenings are suitable. They have an aesthetic appearance and are easy to care for. Durable is used strained glass, it can be colored, transparent, or with various images of the landscape, city panorama, flora or fauna, or abstract compositions.

kayrosblog.ru

How to decorate old cast iron radiators

In many apartments old building Under the windows there are antique cast iron radiators that hardly fit into the interior of the room. Of course, warmth in the house is a very necessary thing, and if the battery performs its functions well, then it should not be changed.

But there are excellent ways to somehow disguise a bulky battery, fitting it perfectly into general form rooms, be it a living room or even a children's room. Let's try to give some advice to those who have been planning to do this for a long time.

How to prepare the battery?

First, it is recommended to do preventive maintenance on your old batteries by cleaning them thoroughly. The old paint is peeling off the battery. In this case, chemical materials are used for flushing, sandpaper and even a primer that protects the metal from corrosion.

How can you decorate cast iron batteries?

1. The simplest thing is to paint the battery in some overall color, for example, paint the links in all the colors of the rainbow. Can be applied to battery White background, and then draw Christmas trees or flowers on it. As an option, paint it with a gradient coloring, for example, with a tint from golden to brown. Many people paint it with silver or bronze paint.

2. A more expensive way is to buy a special decorative screen, which is hung on top of the battery, but still allows heat to pass through. Such screens look very attractive, and you can choose them according to general interior premises.

3. It’s somewhat easier to stretch a cloth over the battery with beautiful design. It can be removed from time to time for washing or replaced with a new design.

As you can see, if you show a little imagination, you can make sure that an ugly old battery immediately becomes almost the central place in the overall design of the room. And the room will be much more comfortable.

sdelaisam.mirtesen.ru

How to decorate radiators?

Today, many apartments still have cast iron radiators as heating devices. They all look the same: bulky, repeatedly repainted with white paint, etc. But progress does not stand still, and today you can easily purchase new, beautiful, modern aluminum or bimetallic batteries. But if for one reason or another you do this on this moment if you can’t do it, don’t despair, in this article entitled “How to decorate a battery?” I will tell you how to turn your old radiators into a real “highlight” of the interior.

Screen for heating battery.

So, one of the simplest and most accessible methods for decorating a battery is to buy a ready-made screen in a store. Today you can find screens on sale various types and modifications. The most common are metal, wood, MDF or plastic screens, which are installed by simply sliding them onto the top of the radiator.

How to choose a battery screen.

Which one should you choose? – depends on your preferences and the interior of the room in which the screen will be installed.

So, for example, if your room is decorated big amount various natural scenery, then a wooden screen would be an excellent option for her, because it will give the room even more comfort and warmth.

And if the colors of the wood do not suit your needs, then you can always order a plastic screen of any color and texture. However, plastic has one drawback - the possibility of some deformation from high temperature, plus it is not environmentally friendly, therefore, as a rule, plastic screens are installed in office premises.

Another example. Suppose your room is designed in a high-tech style with predominant straightforward, catchy images, then decorating the battery with a metric screen in white or matte gray would be an excellent option for you.

In general, MDF screens are considered the most universal screens for radiators. After all, they are available in a wide variety of shades and textures, while such screens are very environmentally friendly, moisture resistant, compact and lightweight. The only thing you should pay attention to in this case is their quality, because defective screens will become unstuck and deformed over time.

DIY battery screen.

By the way, in order to decorate a battery, it is not at all necessary to immediately run to the market or to the store; this type of decor, such as a screen, can be done with your own hands. To do this you need to have suitable material(for me it will be wood, because this is what is certainly accessible to everyone) and several standard carpentry tools.

Initially, we create a wooden frame corresponding to the size of the battery and decorate it with furniture tape. Next, using a stapler or glue, attach a decorative mesh, a beautiful piece of material or wooden grate. The screen is ready. All this work will require you to do no more than an hour of free time, and the result will be pleasing long years.

Assembling a decorative screen video

DIY decorative curtain for the battery.

If you don’t like large frame screens, then you can make a simple one for the battery. decorative curtain: Just choose the fabric according to the decor of the room and sew the curtain according to the dimensions of the radiator.

It can be attached to the bottom of the window sill, above the radiator, using fabric Velcro. Such a curtain will not only be practical, but also convenient, because it is so easy to remove when cleaning or washing. In addition, you can prepare several options for curtains and change them periodically (according to your mood).

In addition to curtains and screens, there are other decorative options, although they are not used everywhere and not so often. For example, an old cast-iron battery can be decorated with a special cover, for example, in the shape of an animal. Such decor would be especially appropriate in a children's room, because in addition to its aesthetic function, it performs a protective function there, protecting children from hot radiators in winter period.

For those who don’t like to bother, I offer the simplest option on how to decorate a battery - just paint it in an unusual color (raspberry, light green, and gray-silver shades look good), or better yet, several, just don’t forget before clean the radiator from old paint.

How to decorate radiators video