How wonderful it is to receive a bouquet of flowers as a gift or simply pick them in a field and bring them home to fill the atmosphere with a fabulous aroma! Be that as it may, you will definitely need a vase.

Decorating your home is common to all women. They lovingly arrange their life, decorating cozy home cute trinkets, including a variety of figurines and vases. Of course, it's easier to buy already finished goods, but if you want something exclusive and unusual, read our article. In it we will tell you how to make a vase with your own hands.

How to make a paper vase with your own hands

You can make a completely paper vase at home using papier-mâché or origami techniques. But for this you need to have certain skills, and this is not suitable for everyone. And be sure to keep in mind that in a vase made of cardboard or paper you can only put decorative flowers, because water will render the product unusable.

To make a paper vase, you can use any transparent container such as an old jar or used bottle. To give them beautiful view the surface should be covered corrugated paper chosen color or wrap in colored cardboard and decorate with matching ribbons.

DIY paper vase: video

Tip: to ensure that the paper sticks well to the glass, use PVA glue diluted with water in a 1:1 ratio.

How to make a cardboard vase with your own hands

For work we stock up:

• cardboard;
• scissors;
• glue;
• paper clips;
• tape;
• coffee beans, nut shells, pistachios (for decoration).

We take any large box, lay it out on the floor or on the table and draw a diagram on it (Fig. 1). Then we cut out the shape and fold the vase out of cardboard, securing the corners with tape. Carefully glue each fold so that the vase does not fall apart. If necessary, cover the outside of the product with paper, wrapping it inside and securing it with paper clips.

It's time for decoration. Of course, it is difficult to calculate how many decorative elements will be needed for decoration homemade vase, but in the process of work you will figure it out and, if necessary, buy the missing amount of parts. So, smear each piece with glue and, starting from the bottom of the vase, begin to carefully paste it over. At the same time, try to leave as little empty space between elements as possible. The result should be a vase, as in the picture shown.

Do not forget to process the top part of the product from the inside in the same way. That's it, the vase is ready to decorate your home!

DIY cardboard vase: video

To make a vase with your own hands you will need: 1. Corrugated cardboard; 2. Mass of papier-mâché; 3. Masking tape; 4. Hot glue; 5. Acrylic paints and varnish.

If you have a few hours of free time and a desire to create something beautiful with your own hands, read how to do it simple vase DIY paper origami.

In fact, you don’t need anything other than double-sided colored paper and strictly following the instructions! In addition, origami is a great way to develop fine motor skills, imagination and logic.

A simple paper vase is useful for storing office supplies, and you can also put a vessel with water and flowers in it.

So, let's get to work. We take a square of colored paper and bend it diagonally, then unfold it and do the same with the opposite diagonal (see Figures 1-3). Then you need to fold the sheet into a diamond shape and smooth the lines with your fingers, along which we will then bend the part (see Fig. 4-6).

Now we bend the left and right corners, turn the part over and repeat the steps with the remaining corners. After this we unbend central angle, lowering it to the middle, and bending the left corner. Then you need to turn the workpiece and repeat the manipulations: bend the corners to the center and along the intended lines. The lowest corner is unfolded and unbent: this is necessary for the stability of the vase.

The procedure can be viewed in more detail on the provided step by step diagram with images. Experts say that it is unlikely that you will be able to make a beautiful vase using origami the first time, because the work is painstaking and requires some skills, so it is better to try it on unnecessary pieces of paper.

If desired, decorate the vase by applying touches of glue to the surface and filling them with colored semolina, sparkles, rhinestones or beads.

In the next collection of pictures you can see how to make a vase from modules - parts from which it is then assembled decorative item. To make the vase bright, use modules of different colors.

This work is considered more complex and requires experience and thoughtfulness: one wrong step and everything will go down the drain.

Vase made from origami modules: video

Modules are made of 1/32 rectangles

Video: how to make 1/32 origami modules. Master class for beginners.

Now we will tell you how to make such an unusual and stylish storage vase small items. Please note that the product is not intended for food!

Let's take it plastic bottle any color, hold it over the fire to bend it: this must be done while the plastic is hot. After cooling, take a soldering iron and drill in a chaotic manner a large number of holes of the same diameter. That's it, our vase is ready!

You can take an ordinary plastic bottle and sew a case on it from felt or an old sweater. This decor is perfect for decorating a country house interior.

A plastic bottle or box of chips can also be transformed beyond recognition by covering the surface with stones or shells.

The most basic way to decorate a plastic bottle is to wrap it in printed tissue paper or colored tape, and then decorate it with a matching bow.

You can also wrap the bottle with colored threads or rope.

DIY vase from a plastic bottle: video

Vases made from natural materials

IN modern world There is such a lack of environmental cleanliness that you want to be closer to nature even in urban conditions. Eco-design is very relevant today, so if you are choosing a vase for your garden, feel free to follow our advice.

Pumpkin crafts are a great way to show your imagination and bring the family together over shared needlework. To work you need to stock up sharp knife, spoon and pumpkins of different sizes.

Take the pumpkin and cut off the top, and through the hole, clean it of the insides and let it dry. Instead of throwing away the pulp, you can use it to make face masks. Let's start with making the simplest versions of environmentally friendly vases.

The edges of the vase can be made “lace” by carefully cutting them with a thin knife.

If you're familiar with , put your skills to use by making a unique pumpkin vase that you can place lit candles inside!

How to make a vase from maple leaves with your own hands

And kids will surely like such a vase, because it’s fun to make and it’s also interesting to use! Collect a bunch maple leaves, clean off any dirt and trim their stems. In the meantime it is necessary to inflate balloon and spread it with glue to the middle. Glue the leaves overlapping each other using PVA glue and a brush. Let the product dry. When the leaves are dry, pierce the ball and carefully remove it.

Good luck in your creativity!

23318 0 0

Wonderful decorative elements from simple things - a do-it-yourself pipe vase

Have you recently done a renovation and are left with a pile of rubbish? Don't rush to put everything in bags and send it to the landfill. Perhaps you will find something useful for home decor. After all, you can stumble upon such useful items for crafts as plastic or paper pipes, the transformation of which I will tell you about today.

We create original decorative elements

The disadvantage of such homemade vases is that they cannot be used for their intended purpose, especially if it is a do-it-yourself vase made from a cardboard tube. That’s why you can’t pour water in them and you can’t put fresh flowers. But don’t be upset about this, as these decorative items are perfect for dried flowers or artificial bouquets.

Naturally, there are different pipes: plastic, cardboard, metal. It is more convenient to work with cardboard elements, the most difficult is with metal ones. Now I will tell you about the process of creating vases from plastic and cardboard pipes.

We use pipes from linoleum (cardboard)

It is very convenient to create both tabletop and floor-standing tall vases with your own hands from linoleum pipes, since the material is easy to process. It’s good if during the renovation you spent more than one roll of linoleum - this means that there is enough material to create several original vases. I suggest you familiarize yourself with several models of decorative elements made yourself.

Beautiful floor vase

For the base future vase you can take pipes from different material, but in this embodiment, a pipe made of thick cardboard (from linoleum) is used. The height of the future vase depends on your wishes and preferences.

So, for work we need:

• pipe;
• heat gun with rods;
• base for the vase (piece of fiberboard or OSB);
• thick cardboard;
• marker or pen;
• scissors;
• putty;
• sandpaper;
• PVA glue;
• old newspapers;
• acrylic lacquer.

Once all the materials and equipment are at hand, let’s get to work:

1. Measure and cut a piece of cardboard tube to the desired size. From fiberboard sheet or OSB, cut out a circle that will serve as the bottom for the vase. Glue the pipe to the base using a glue gun.
2. Decide what shape your vase will be and make a template. Cut out stiffening ribs from cardboard. Ideally there should be at least 25-30 pieces.

1. Insert a glue stick into the heat gun and heat up the device. Start gluing the cardboard blanks to the pipe.
2. Glue all the cardboard parts. Try to glue so that the distance between them is approximately the same. For convenience, you can make markings based on the vase.

1. We cover the resulting frame with pieces of newspaper (papier-mâché technology). Dry the completely pasted product for 2-3 days until completely dry glue.
2. Mix the putty with PVA until it becomes thick sour cream, and begin processing our product. Apply an even layer of putty no thinner than 0.5 cm to the frame.

1. Carefully coat the entire surface of the vase. We try to do as much as possible flat surface. We coat the neck no less thoroughly and treat it as well. inner part products to a depth of 5-10 cm, as far as your hand can reach.
2. We wait until the product dries (several days), then finely sandpaper level the surface of the vase. We decorate at our discretion, paint, and varnish.
3. Beautiful decorative decoration ready for your apartment. Enjoy the results of your work.

Floor vase “Ropes”

To create this decorative element, you will need:

• linoleum pipe;
• plywood or thick cardboard;
• small deep container;
• twine (any kind, as long as it’s not made of synthetic material);
• PVA glue;
• aerosol paint of the desired color, preferably acrylic (price in Ukrainian stores - from 50 UAH and above).

Now I’ll tell you in detail how such a floor vase is made from a linoleum pipe. So let's get started:

1. Take a cardboard pipe and cut a piece of the required height. In the photo there is a vase made of pipe, 60 cm high.
2. For the base, cut out a circle from thick cardboard or plywood. Make the diameter of the circle 1-2 cm larger than the pipe itself. It is impossible to make the base the same diameter as the pipe, since the vase may simply fall due to its height + the weight of the flowers.
3. Glue the base universal glue or PVA.
4. Pour glue into the container. We unwind the twine, completely dip it in the glue and wait until it is saturated. It is not advisable to use synthetic twine, as it will not be saturated with glue and will not adhere well to the product.

1. We wrap the pipe with soaked twine. If there are small gaps between the threads, it’s okay, but it is advisable to wrap the tube completely.
2. Leave the product for several days in a warm, dry place until the glue dries completely.
3. Using a can of spray paint, we paint the product. We work with spray paint outside the house: on the street or open balcony. Be sure to protect yourself with a respirator and rubber gloves.
4. We enjoy the result.

I fervently believe that detailed instructions will help you create delightful vases from linoleum pipes with your own hands. Don’t be afraid to experiment and show your imagination, because you can create amazing things from linoleum pipes.

Plastic pipes for colorful fakes

After repairs, do you have an unnecessary piece of plastic pipe lying around, and you don’t know where to put it? You did the right thing by deciding to look possible options transformation of this trinket.

Now I will show you what wonderful vases you can make from them. Still don't believe me? Then watch!

Vase with butterflies

Who would have thought that such beauty could be created from a piece of plastic pipe! No matter how it may seem at first glance, even the materials for yourself will be inexpensive. So, let's start creating a vase.

I’ll start the master class with a list of necessary materials:

• plastic pipe;
• plastic cover for the bottom;
• PVA glue;
• paper napkins;
• colored paper medium density(any colour);
• satin ribbon, 3 cm wide;
• black acrylic paint;
• golden acrylic paint;
• foam sponge;

Let's start creating the product:

1. First, cut the pipe to the desired height. If the size of the pipe suits you, there is no need to cut anything.
2. Using super glue we connect the main part to the bottom. We wait until the glue holds the parts together well.
3. We dilute the PVA glue with some water (just a little, for easy application), and use a brush to lubricate the surface. Quickly, before the glue dries, glue paper napkins.
4. We wait until the first layer dries, coat it with glue and create a second layer from napkins.

1. While the napkins dry, cut out blades of grass and butterflies. From colored paper we cut out blades of grass of different lengths. Using sharp scissors, cut out butterflies from the ribbon.

It will be much easier to cut out butterflies from ribbon if you use a cardboard stencil. To do this, place a stencil on the tape, trace along the contour and cut it out.

1. When the layer of napkins has dried and all the parts have been cut out, we begin to attach them. We do this using PVA glue, but now we don’t spread it. We glue the blades of grass with a slight tilt, and place the butterflies in a chaotic order.

1. We wait until the product is completely dry. This may take 2-3 hours.
2. We take black acrylic paint and thoroughly paint the future vase. To avoid any unpainted areas, I recommend using spray paint.

If you use spray paint, it is best to work with it outside or on a well-ventilated balcony.

1. And now, the product is almost ready, all that remains is to add golden notes. To do this, take a golden liquid paint, pour a little into an unnecessary container and use a foam sponge to apply it with point movements. Be sure to leave part of the black background, do not paint the product completely golden, but paint all the blades of grass (you can use a brush for this).

After the paint has dried, the decor item is completely ready for use. You can put it on coffee table, nightstand or desktop. This creation will fit perfectly into the interior of your home.

Of course, it is better to put dried flowers or artificial flowers in such a vase, but you can experiment. Try using good glue and sealant for connecting the base pipe and the bottom. If everything works out, then you can pour water into such a vase and put fresh flowers.

Beautiful vase “Gifts of Nature”

I would like to invite you to try making such a decorative vase, decorated with tree bark and decoupage elements. This floor item can become spectacular decoration your living room or hallway. And with a bouquet of flowers inside, the appearance of the decorative element will noticeably change.

I want to immediately warn you that creating such beauty will take much more time than the previous model. Some elements and surfaces take quite a long time to dry. If you are planning to give this decorative element as a gift to someone, I recommend starting its creation in advance, no later than 1.5-2 weeks before the desired date, so that the product is completely dry.

So, what is needed to create such beauty:

• plastic pipe (about 70 cm long);
• PVA glue;
• newspaper;
• primer (any one you find in the store);
• bark of tree;
• rope or rubber bands for money;
• colored napkins for decoupage;
• stickers (if not, you can print them color image on a regular piece of paper and cut it out);
• gypsum;
• acrylic paint;

Step-by-step instruction:

1. We take the pipe, cut it to required sizes. Ideal height for floor vase(if the pipe is weaving) - 60-70 cm. If there is no need to change the height, we leave everything as it is.
2. We tear the newspaper into medium-sized pieces (about 10x5 cm). Dilute the PVA glue with a little water and use it to cover the pipe with newspaper. Let it dry a little, prime it for strength and let it dry.
3. We decide what shape and size the area on which the picture will be placed will be. Cut out the area for the picture from paper and glue it on top of the newspaper. I will have sunflowers, so I make the background beige.

1. We strip the bark from firewood or simply cut down trees (preferably with a reserve so that there is definitely enough). To get rid of various bugs in the bark, you need to boil it for about 10-15 minutes and then dry it. The bark takes about 2 days to dry.
   Glue the bark onto the surface of the pipe. You can use either PVA glue (not diluted with water) or universal thick glue. If the glue is liquid, then the bark needs to be fixed with ropes or rubber bands - then it will not move out and will be able to stick well.
2. When the bark has stuck (depending on the glue - about a day), we take colored napkins with a pattern. Cut it out necessary objects along the contour. I have sunflowers, but you can take any flowers or a completely different design.
3. Take butterfly stickers or print a color picture on paper and cut it out.

1. Glue the flowers into the area reserved for decoupage. For this we use PVA with water.
2. As you can see, sunflowers alone look lonely, so you can’t do without butterflies. We glue butterflies onto flowers, as well as empty seats. You don’t need too many of them, it will be too cluttered.
   We make a not very “cool” solution from gypsum and lay out the bottom of the vase: put a pipe on a plastic board and lay the solution on top. We wait until the plaster dries (about 2 days) and proceed to the final stage. Paint the bark Brown, and apply 1-3 layers of varnish on top.
3. We leave the product for a few more days for final drying. We use it as a gift or decorate our apartment with a wonderful decorative element.

Conclusion

So, now you know what wonderful things you can make from seemingly useless materials. the necessary pipes. A little imagination, patience, time - and here in front of you is a wonderful decorative element that is not inferior in beauty to store-bought products.

But in my opinion homemade elements decor is attractive precisely because you will not find the same exact specimen anywhere else. And what is this very moment of creation worth!

Watch the video in this article to get additional information. Write your questions in the comments, which I will be happy to answer.

If you want to express gratitude, add a clarification or objection, or ask the author something - add a comment or say thank you!

To decorate a room, you don’t need to have any special talents, because it’s enough to have a little artistic taste. But before you decide what you can use to decorate the vase, you need to decide on the technique.

With help beautiful decor vases can transform your home in the blink of an eye. For decoration, not only painting is used, but also many different techniques.

Techniques for decorating vases:

• painting;
• pique technique;
• decorating with multi-colored fillers;
• decoration with stones or rhinestones;
• ribbon decor;
• wrapping in fabric.

Decorating ideas and instructions for beginners

Extraordinary comfort is created not only by things made with your own hands, but also by bringing warmth into the house. For decoration you will need socks or knee socks, preferably with a beautiful pattern.

Progress:

• Take a small container.
• The bottom above the heel must be carefully trimmed.
• In order to determine the size of the base, use a regular sheet of paper.
• The base should be outlined with a pencil according to its size.
• Next, you need to cut out a piece of scrap product that matches this design.
• After the flap is sewn together with the base, the cover will be ready.

Pique painting

Dot painting has been used since ancient times, and you can give the product a vintage look if you look at the photo of the vase decor. In this case, the format is important, that is, you need to take into account the dimensions, the spacing between dots, as well as the color scheme.

Materials:

• contour for drawing an image;
• alcohol;
• cotton wool

• Treat the surface from excess fat;
• Apply the drawing using the dot method.

The advantage of this technique is that any housewife can cope with such a task.

Master class on original decor of vases at home

To complete the painting you need:

• stained glass or acrylic paint intended for glass surfaces;
• spray paint (optional);
• artificial tassel (for acrylic dyes), or a brush from natural materials(for stained glass dyes);
• scotch;
• degreaser;
• cotton wool

Drawing process:

First you need to degrease the outer surface with any suitable means. For example, you can take alcohol. Wrap the product with tape, forming an image in the form of stripes.

Areas without tape should be thoroughly painted over. In this case, you are allowed to paint over the tape to make the image neat. Place the vase in a place where the design cannot be damaged, and do not touch it until drying is complete.

When choosing a paint, you need to study the instructions, since the drying time varies.

Faceted objects are more suitable. During the process, first one side is painted, and then, after it dries, the rest. Spray paint is easier to apply and dries quickly. Stained glass paints take longer to dry, but this process can be accelerated by placing the product in an oven heated to 150 degrees. Wait 15 minutes.

Decoration of floor vases

They look great in interior design floor elements, which give the room a respectable appearance. Design styles such as high-tech or modern require bright accent, and the floor vase fits perfectly.

Master class on decorating vases with your own hands

To create the product you will need to take a plain floor vase. The container must be painted on the outside, having previously treated the surface, and the neck must be wrapped with string or twine. This is often how vases are created in nautical style.

Any image is suitable: blue stripes alternating with white, an image of an anchor or stencils with images of sea creatures.

Vases are decorated in the same way, creating a feeling of unity with nature. For decoration you will need twigs, which must be carefully glued to the outer surface using PVA glue. Particles of paper of neutral shades are usually placed under the cuts.

The simplest vase design can be created by decorating it with pebbles, cereals, and artificial flowers. The best container is made from transparent material, for example, made of glass. The filler is laid in layers, which should be harmoniously combined in color.

Beads serve as a universal filler for vases because they color palette very diverse. In order to save material, layers of beads can be alternated with sand, small pebbles or other bulk filler.

Photo of vase decor

What makes our home truly cozy? Of course, nice and stylish little things! An important element Floor vases can complement the design of your apartment or house.

And here we have it for you good news: You don't have to spend a ton of money on expensive designer new items. Floor vases can be made with my own hands, and from rather ordinary raw materials!
Today you will learn how to make a beautiful floor vase from waste material with your own hands, easily and efficiently.

Ready to create? Then let's go!

DIY floor vase from a jar

Sometimes you can create the most unusual things from the most simple materials. Look at this vase, would you think that the basis for it was the familiar three-liter jars? That's the same!

Admit it, did you want one of these? Then take out your reserves of creative energy from your pockets and go ahead!

To create a floor vase from a three-liter jar you will need:

• Two 3 liter jars;
• One tea saucer;
• One plastic container from canned food;
• PVA glue;
• Cardboard egg trays;
• Silicone glue “liquid nails”;
• Acrylic paint;
• Decorative elements of your choice;

Stage No. 1

Let's create the base of our vase. To do this, take two jars, fasten the bottoms with silicone glue, and glue an upside-down saucer to the neck of one of the jars. It will serve as a stable leg for the future masterpiece.

Then we cut off a plastic container from canned food and attach it to the neck of the top can with glue.
Let it dry overnight.

Stage No. 2

During this period, we can soak pre-shredded cardboard egg trays in water until completely liquefied. After this, the cardboard should be squeezed out thoroughly and mixed with PVA glue until a homogeneous mass is obtained.
Apply the slurry to the base of our vase in an even layer.
Leave for two days.

Stage No. 3

After the workpiece is completely dry, level the texture with alabaster.

Stage No. 4

In this form, the vase is completely ready for the final stage of finishing - decoration. Use your own imagination or the tips we will give below.

DIY floor vase made from plastic bottles

Another chic option for waste-free use of garbage. Don't throw away plastic bottles, you can use them to create real masterpieces for your home!

A floor vase from plastic bottles can be made in different styles. For example, excellent option it can become an ordinary five-liter bottle with a cut-off neck, wrapped in thin birch bark.

Idea: “Dress” a plastic bottle in a stylish “sweater” crocheted or knitting needles. This know-how will pleasantly surprise guests and fill your home with comfort and warmth.

Floor vase made of cardboard and papier-mâché

Yes, you read that right, you can also make a stylish floor vase from cardboard. It can’t be distinguished from an expensive designer one, just believe me. And if you don’t believe it, see for yourself.

To create a floor vase from cardboard with your own hands you will need:

• Cardboard tube (can be taken from under a linoleum roll);
• Thin cardboard;
• Hot melt adhesive;
• Newspapers and egg trays for papier-mâché;
• Polymer putty;
• Fine sandpaper;
• PVA glue;
• Acrylic lacquer;

Stage No. 1

We attach the pipe to the cardboard base and draw a shape for the future vase. We make 30 identical templates and cut them out.

Stage No. 2

We glue the cardboard blanks to the pipe, distributing them evenly around the perimeter. Leave for several hours until completely dry.

Stage No. 3

We glue the base of the vase with pieces of newspaper sheets in several layers.

Attention: the layer of paper must be thick enough so that the voids are not visible during subsequent finishing.

Stage No. 4

Soak the egg trays in water, squeeze them out and mix them with PVA glue. Apply an even layer to the base and let dry.

Stage No. 5

Coat the vase with putty in an even layer. When the mass dries, smooth out the texture using sandpaper.

Stage No. 6

We decorate the vase. This can be conveniently done using spray paint any color. On top you can finish it in the style of decoupage, stucco, or apply the ornament manually using acrylic paints.

Stage No. 7

Cover the surface with acrylic varnish and leave to dry.
That's all the tricks. DIY floor vase made from papier-mâché and cardboard is ready. Enjoy!

Floor vase made of pipe

Everything is quite simple here. If after renovation you still have unnecessary plastic or cardboard pipes at home, don’t rush to throw them away, it’s better to make a wonderful vase out of them.

A stylish DIY floor vase made from a pipe is easy, practical and beautiful.

Just wrap cardboard or plastic pipe newspapers, fixing them with PVA glue, paint with acrylic paint in White color and decorate.

Idea: to decorate a floor vase made from a pipe, use old nylon stockings. Soak them in PVA, squeeze them thoroughly, and then put them on the prepared pipe. Distribute over the entire area, creating curly folds. Let the workpiece dry, and then paint and decorate to your liking.

DIY floor vase made from newspaper tubes

The now fashionable technique of weaving from paper wicker allows you to create lovely crafts from waste material.

In order to make a chic wicker floor vase with your own hands you will need:

• Newspaper tubes (about 400 pieces);
• PVA glue;
• Scissors;

Stages of work:

1. We make a 4x4 cross braid, then secure it with one tube around it. This will be the basis of our future vase. Next, we perform seven rows of regular circular weaving around the base, gradually spreading one tube at a time.
2. After this, we begin to remove the walls of the vase, bending and weaving in the previously separated tubes. Moving up, we gradually expand the space of the product up to 22 rows inclusive.
3. Then we weave about ten rows evenly without spreading, and coat the product with varnish.
4. Then weaving continues, narrowing the rows and tilting the tubes inside the product until about 72 rows.
5. We expand the neck of the vase over 12 rows and complete the weaving by creating sides in 3 rows. We cut off the remaining pipes.
6. We cover the product thin layer PVA, wait until completely dry. Then comes final stage finishing - varnish coating. This should be done several times in a row.

DIY floor vase decor

There can be a lot of options for decorating a floor vase, the most trendy of which are: wrapping with twine, decorating with glitter, silicone glue, as well as good old decoupage.

Of course, the vase should be decorated in accordance with the style of the room; the method of its external decoration will depend on this.

Well, since we already have a beautiful vase ready, we can think about what to fill it with.

Please note that not all types of homemade masterpieces are suitable for living bouquets, which means we will also make flowers for floor vases with our own hands.

When creating an artificial bouquet, use the most common tree branches. It looks very beautiful and natural. At the same time, a vase in eco style for greater harmony With a bouquet you don’t even have to paint it.
Attaching balls from leftover knitting threads to branches is an excellent and economical option for needlewomen.

Anyway, decorative branches for floor vases with your own hands already long time do not go out of fashion. So feel free to use them to decorate your own home.

No matter how fashion changes, handicrafts are always in trend. Remember that you can create masterpieces of design art from the simplest and cheapest materials. The most important thing is imagination and a creative approach to business.
A DIY floor vase is easy, beautiful and stylish. Get creative and get inspired.

Good luck!

DIY floor vase: secrets, techniques and unexpected decisions updated: April 23, 2018 by: dekomin

For those who want to change the interior of their home, we provide good opportunity– DIY vase decor. Every home has dishes, tall glasses, old vases, any suitable containers that you want to update and make more interesting. If you sort through various options, then you will certainly find interesting master class from available inexpensive materials. We have several master classes - the choice is yours!

Today we will create and decorate a vase. The new vase will be in a marine style, like this original products make the house unique and cozy. Despite the storms outside your windows, your home will always have peace and its own warm atmosphere.

To work you will need:

1. Any suitable containers (glasses, vases, glass and iron jars, and so on).
2. Rope or thick twine.
3. Fabric dye (you can use Easter egg dyes or simple green dye).
4. PVA glue.
5. Scissors.

Let's start decorating with a round vase. To do this we need ropes of the same length. Draw a glue line in the middle of the container and glue the ends of the ropes. The ropes should completely cover the vase, leaving no gaps. We wait for the glue to harden and begin to weave a “braid”, as in the photo. We finish weaving and cut off the excess. Glue the ends of the “braid” onto the vase. To neatly hide the ends of the “braid”, you can glue additional decor from a rope.

Next, we will decorate glass cylinder. To do this, you need to glue the ends of the ropes to our vase. They should be longer than the container (then we’ll cut off the excess). Pieces of rope in length slightly higher than the vase, and one long rope for decoration. Thread the rope in a staggered pattern through the 4 ropes. Glue is used at the bottom, middle, and top. We glue 1 rope at the top and bottom.

AND last option– decor with coloring. Take a similar container and apply glue to the surface, try to apply more at the top and bottom. We wind the rope around the vase, pulling it harder. Next, dilute the paint, or a drop of greenery, in a jar of water. First, the coloring liquid should cover ⅓ of our vase. We lower the vase into the water and hold it for a short time. You will see for yourself how ⅓ of the vase will be painted. We take it out, wait for the product to dry a little, add water to ⅔. We lower the vase again. The tone on top will be lighter. So I'm ready beautiful thing for interior.

Like these ones stylish vases turned out for the interior.

A great idea for decorating glass glasses is to make a vintage flower vase out of the glass. Using a hot-melt gun with silicone glue, we will make a three-dimensional design on the vase. The master class is very simple, in this way you can decorate not only a vase, but also flower pots, bottles, decanters, and so on. And if you do everything in one color, you’ll get a cool ensemble for the interior.

To work you will need:

1. Glass glass or vase.
2. Light acrylic paint.
3. PVA glue.
4. Glue gun.
5. Dark (black or gray) acrylic paint.
6. Sponge or brush.
7. Napkins or rice paper.
8. First, we select a vintage stencil.

We transfer the desired design onto paper and secure the paper with the design inside the glass with tape. Draw lines on outside glasses.

Take a glue gun and fill the entire inner surface drawing. Don’t be afraid to smear the glue; it comes off easily after drying. with a regular knife. Next, take napkins or thin paper and tear them into pieces.

Then we glue pieces of paper or napkins onto the surface with PVA glue. Use a brush or sponge. After the surface has dried, we coat the top of our product with light acrylic paint.

At the end of the master class, for the final decoration, we paint over the vase with a dry brush and black or dark acrylic paint. We coat the top with varnish. The master class on interior decoration is over.

Do it yourself original vases for an interior made from ordinary simple products - this is tempting and interesting. The master class is very simple and inexpensive. If you don’t have glass containers of this type, you can decorate any jar or bottle in this way. Vases decorated in this way are light and embossed.

To work you will need:

1. Glass or plastic containers.
2. Glue gun.
3. Spray paint.

Before work, you need to degrease the surface of the vases; we do this with any alcohol-containing liquid. We will glue gun do geometric figures: triangles, squares, lines. They shouldn't be correct form, same handmade. After the glue has dried, we begin painting the products with spray paint. If necessary, repeat painting after drying.

Next, we place round vases on top of long containers. Glue the vases together with a glue gun. These vases are perfect for decorating a living room. The combination of vases of different shapes will look very interesting in the interior. The master class is over.

And finally, the most complex decor, but very interesting - dot painting vase We offer a small master class. This is done in outline or acrylic paints. Dots are placed using a contour, a toothpick, a needle, or a cotton swab. Paints for painting can be bought in art stores or online stores.

This decor is one of the most complex and time-consuming. The most important thing is to try not to merge the dots. Very beautiful products are obtained on a black background. That is, a vase or bottle made of dark glass is the best option for work. But look at how beautiful and unique the products are.

How else can you use glass or other containers for decoration? Interesting option: using twigs, pencils, or cocktail straws. All this can be secured with glue or double tape.

You can wear vases with leggings or black tights. Decorating is very simple: cut off the bottom or middle piece from the leggings; it should be longer than the vase. Pull the lycra over glass vase, we grab the bottom with a needle and thread. We simply tuck the top edge inward. You can secure it inside with transparent tape.