In the summer heat, after working in the garden beds or active games with children, nothing compares to the freshness of a summer shower. A small neat structure on a sunny spot or just a compact device on the wall of a country house is a temporary replacement for a bathroom.

We will tell you how to build a summer shower with your own hands. The article we presented describes in detail all types of structures popular among summer residents. Instructions are provided for constructing homemade shower stalls that increase the level of comfort of country life.

The design of a shower for a dacha, which is usually installed near the wall of the house or at some distance from the building, is quite simple. Usually it comes down to a “volumetric tank + faucet-watering can” set. The tank is mounted on the roof of a light building, and the watering can should be no higher than at arm's length.

But we will move away from the primitive designs of a summer shower and consider various models that differ in both their external design and the method of water supply.

Curtain on a metal frame

A simple and budget solution is a frame-type product. It consists of a metal frame, in the upper part of which a water tank is attached. The container can be made from a barrel, but factory models are most often initially equipped with a flat tank with a volume of 100-200 liters.

Water enters the tank in two ways: pumped from a water supply (well, well) or carried manually in buckets. The second method is labor-intensive, but sometimes it is the only possible one.

An excellent solution for taking water treatments in the summer is a mobile cabin with a shower and washbasin attached to the outside. The function of a water storage device is performed by a plastic barrel securely attached to the top.

The metal frame can be sheathed with sheets of polycarbonate, plywood or corrugated sheets and equipped with a door, then it will turn into a closed shower stall. It is easy to move from place to place and install where it is currently needed: in the garden, in the garden, near the house, summer kitchen or swimming pool.

With the technology of constructing a summer shower covered with polycarbonate sheets, dedicated to the analysis of options and the construction of similar structures.

Light wooden structure

A building covered with clapboard, boards, timber or siding is a more serious decision. If the project is expected to last several years, it is recommended to make a foundation that will ensure stability and reliability. Sometimes metal posts dug into the ground are enough, on which the entire structure rests.

A lightweight semi-open portable model assembled from thin wooden planks installed vertically and secured with metal hoops. Suitable for areas with running water

You can get creative and create a unique structure that is both simple and stylish.

It is good to install such buildings near a pool connected to a water supply system. But any systems associated with plumbing are intended more for a cottage than for a country house for temporary residence

If a fully landscaped house is built on the site, you can attach it to the wall of the house, organizing a water supply.

Wooden buildings and partitions can become a design element if they are assembled from well-processed wooden parts and then covered with decorative paint or varnish

Wood is valuable because it goes well with brick and wooden houses, fences, and green spaces. In addition, it belongs to soft, easy-to-process materials, so you can take care of creating a comfortable summer shower in your dacha yourself.

As you may have noticed, to create a comfortable cabin you do not need complex drawings and diagrams - just a small amount of wooden parts and a little imagination.

Capital building with tank

If you live outside the city permanently or spend more than six months, a permanent structure made of brick, timber, or foam blocks will come in handy. In order for the shower to be provided with water, the storage tank must be connected to the water supply system, and to use the room even in October or early spring, heating can be done.

For better functionality of the equipment, it is placed inside the building, under the roof. A watering can with a tap is mounted in the lower part, a tap for water supply is fixed on the side, and a heating element on the other side.

When cold weather sets in, the system must be completely emptied of water, otherwise it will freeze and damage all equipment.

An exception is made only if the building is insulated - for example, it is an extension to the house and is partially heated by a common heating system.

Option for a household building made of brick with a tank. There are three rooms under one roof: a shower, a toilet and a change room; each compartment has a separate door.

With my own hands. Let's look at the simplest and most accessible ways to construct such a necessary building.

We often spend our summer at the dacha in order to be closer to nature for some time, away from noisy highways and the speed of the metropolis. But the holiday will not be entirely pleasant if we do not have the opportunity to take an invigorating shower, which allows us to wash away dirt and dust, and also makes us fresh and clean on a hot summer day.

Building an outdoor shower yourself is not so difficult, despite the fact that there are many options for its implementation, some of which are quite simple and do not require serious investments, both time and money. So let's get started.

Ready-made building for a summer residence

If you are too busy a person or too lazy to build a shower and you have the money, then you can simply buy a finished product. Or order a frame from a craftsman and install the tank yourself. And that’s it, you can use this wonderful device!

If warm water is enough for you, you don’t have to use electric heating devices for this. In hot weather, it is enough to install a container of the required volume from available material above the booth, paint it black so that there is better heating by the sun's rays.

The tank will heat up more quickly if you place it in a transparent box made of glass or plastic. Such a structure will allow you to provide yourself with warm water even in cool weather, the main thing is that the sun is not hidden behind clouds.

This option will be the simplest and most convenient for lazy people and money-lovers.

Open design

An outdoor summer shower built with your own hands is suitable for quickly washing away accumulated contaminants. This design is very simple and easy to assemble from scrap materials.

This open device will help strengthen the body and increase immunity.

It is best to make such a summer shower with your own hands near some wall, installing a supply pipe with a tap on it and. To protect yourself from prying eyes, you can attach a curtain. To do this, you need a pipe bent with an arc with loops for the curtain.

This is possible if your summer cottage has running water. If there is no water supply, you can attach a suitable container to the wall and you can take water procedures.

It is also necessary to protect the building wall and floor covering from the destructive process of water. You can line the wall with water-repellent, and put artificial stone or other material on the floor. Just the material should not be slippery, otherwise there may be a risk of injury.

If the constructed outdoor shower is located next to the developed site, then no equipment is needed - the water used will evaporate and be absorbed into the ground.

How to build a shower in your country house with your own hands?

To begin, select a suitable and empty place in your dacha to install a new building. If you rarely use the shower, the wastewater can be poured directly into the ground.

But in case of frequent washing, you need to think about diverting a large amount of water to a certain place. If there is a septic tank, then wastewater can be directed there, of course, if the volume of the tank allows.

After excavation work, you can make the frame of the summer shower with your own hands, which must be solid (strong), because it needs to withstand the weight of the tank. The frame can be made from:

• boards (bars) reinforced with metal corners;
• steel angles or pipes.

A metal structure will be more durable, but will require annual painting to eliminate the possibility of corrosion, while a wooden frame is much easier to complete.

Do-it-yourself summer shower - drawings for construction:

The material for the walls can be any available means:

• wooden lining;
• plastic panels;
• flat slate and much more.

Look at the photo of a DIY summer shower:

The inside of the cabin will become more beautiful and stronger if it is lined with plastic clapboard, the floor is made of boards in the form of a lattice, and the wooden material is treated to prevent splinters.

Consider the erosion of the soil under the shower over time. You can install a plastic or iron tray with ebb for the floor.

Or the simplest option is to pour a layer of crushed stone under the floor.

Watch an interesting video on how to make a budget summer shower in the country:

P.S. As you can see, it is possible to build a shower for your dacha on your own and you do not need to buy expensive materials; you can use what is available.

Nothing relaxes you more after a hard day at work at the dacha than a summer shower. Water not only calms, but also refreshes, distracts from unpleasant thoughts and relieves stress. But what to do if there is no shower on site? If you don’t want to splash around in a trough or basin, you need to take care of comfort in the field and design a refreshing summer shower for your favorite summer house with your own hands, using ready-made photos and drawings.

How to build a summer shower with your own hands

The outdoor shower occupies one of the first places among all country houses. Sometimes this is not just a way to wash yourself after a day of cultivating the land has come to an end, but also the only way to cool down in the heat.

First you need to choose a place to install the shower structure. To do this, you should examine your site for secluded places.

On the other hand, this place should not be far from the main building, so that you do not have to freeze on the way to a warm house if you decide to take a shower on a cool day.

Advice! If a solar heated tank is provided, ensure that nothing obscures the water tank.

Once you have found a suitable location, select the optimal dimensions for your cabin. Please note that for ease of movement a person needs a room of at least 1 m 2. If a dressing room is planned for changing clothes and storing dry things while swimming, the building increases by another 60-70 cm. The height of the shower stall is approximately 2.5 m. So, the estimated dimensions of the shower for the dacha are 170x100x250 cm.

If the structure is supposed to be wooden, then the next stage of construction will be the construction of a frame made of wooden beams or a metal corner.

Next are the walls. Please note that for better ventilation, the walls should be no less than 20-30 cm away from the ceiling and pallet. The walls are constructed mainly from materials that were left over during the construction of the main dacha building.

Water supply in a country shower

When installing a shower for a summer house with your own hands, it is necessary to provide for the water supply and drainage in advance. The drainage system is laid during the construction of the foundation, and the supply of clean water is organized during the installation of the tank.

Country house For many, it is a favorite place where you can relax from the bustle of the city. But here, far from civilization, people are not used to giving up the benefits that this civilization provides. And one of them is the opportunity to splash around on a hot afternoon under a cool shower. That's why Summer shower refers to utility structures necessary for a comfortable pastime in a suburban area. It is even more relevant if there is no natural body of water nearby. To feel like a person even in the country, you need to build a solid structure that can last for more than one season. Have you already thought about how to build Summer shower? The photos will clearly demonstrate the main stages of the process.

We build a summer shower for a summer house with our own hands

Start bringing your vision to life with careful design. As they say, measure seven times, but cut only once. To get started, look through ready-made summer shower designs and make your own based on them. The space allocated for the shower, the availability of building materials and the desired dimensions are taken into account. Here you need to take into account the volume of the owners themselves.

Even a beginner can easily create a shower project on his own. A simple drawing or small drawing will help calculate the amount of building materials, avoid some mistakes and unnecessary costs.

An outdoor shower should be spacious and comfortable. It is necessary to provide space for clothes and bath accessories - at least 40-60 cm. The height of the shower should be about 2.50 m. The most common dimensions of the interior space are 160x100 mm and 190x140 mm. All this must be taken into account when drawing up a drawing or project.

Tips for site preparation...

Now you need to decide on the location of the summer shower. Naturally, it is better to build it in a well-lit, sunny place, away from other buildings. Then the water in the tank will be heated from the sun's heat throughout the day. But if you plan to build a heated summer shower, then it is not necessary to adhere to this condition.

The distance from home should also not be too great so that you can quickly go indoors after water procedures. It would be wise to take care of water drainage in advance. It is better to dispose of it in a septic tank or settling tank. It is worth paying attention to the convenience of water supply and, if possible, ensuring automatic filling of the container. After choosing a location, you need to prepare the site: remove the top layer, level the base for the shower and fill the site with sand.

We are building the frame...

An outdoor shower can be a permanent structure, or it can be a light frame structure. Therefore, the main stages of constructing such showers differ.

The foundation is a reliable basis for a shower stall, but sometimes it is completely unnecessary

In order for the base for the shower to be correct and for convenience, you need to make basic markings: for this, pegs are driven into the outer corners of the site. After this, be sure to check the diagonal and tighten the cord.

The dimensions of the foundation depend on the materials that will be used in the construction of the shower. For a building made of brick or cinder block, a foundation 30 cm deep is poured. If a metal or wooden frame for a summer shower is used as a base, the foundation will be slightly different. Before pouring, you need to prepare a place for the pipes - lay a log or branch of the required diameter, wrapped in roofing material.

If you use an outdoor shower family has been planning for more than one year, it is better to make formwork - raise the level of the foundation above the ground by 10-15 cm, increasing the height of the trench using boards reinforced with pegs and spacers.

When pouring concrete for a shower base, it is extremely important to ensure a level surface. This is done in the same way as when screeding a floor, using a level and two guides. The guides are leveled, poured with concrete, and the base floor is leveled along the guides. Only a horizontal surface can serve as a reliable basis for further construction. After the leveling is completed, they begin laying bricks.

Installing a shower using a frame

You can use a metal frame as a base for the shower (it is more durable). Construction of a summer shower will be much more economical if you use wood. But this material is not durable. Taking into account the peculiarities of our climate and the increased humidity due to the operation of the building, it is better to treat it with bio-impregnation to protect it from insects and fungus.

Having decided on the amount of building materials and the dimensions of the building, we proceed to the installation of the frame. The first stage is marking. A rectangle is marked on the ground, the sides of which will correspond to the parameters of the future structure. In order for the structure of the summer shower to be stable, it is necessary to make a pile foundation. Therefore, holes of the required depth are drilled at the corners of the markings (130-170 cm, the depth depends on the length of the pipes). Then the pipe foundation is installed directly. For this, it is better to use metal pipes 1.5–2 m long (diameter 9-10 cm), but even railway sleepers can be used. The piles are deepened into the ground so that they protrude 20 cm beyond the ground. The pipes are then filled with concrete. After it hardens, wooden beams should be installed in the pipes. The width of the timber used for the frame should be no more than 10 cm.

This is how we will cover the frame with PVC film and get an excellent construction

The next installation step is bandaging: starting from the top, the entire structure is bolted together. If the calculation is made correctly and all dimensions are observed correctly, the design will be reliable. This will make it possible to install a large water tank. Its volume should be calculated according to the formula: 40 l × 1 person and no more than 200 l. The structure simply cannot withstand a heavy container. It is desirable that the tank be flat and correspond to the area of ​​the roof, that is, rest against the supporting structures.

The bandage inside the frame will later serve as shower floor joists. Now we connect the beams-bases of the walls with each other using bevels. They should be installed in the thickness of the wall, but not in the overlay.

And here is a version covered with plastic slate

Slate sheets, OSB boards, boards, plastic panels and even PVC film can serve as walls for such a shower.

Summarizing communications...

You can build a summer shower with your own hands from building materials left on the site after the construction of the dacha, but with the installation of communications the situation is somewhat different. This is not possible without financial investments.

• Laying pipes, installing a tank. After the structure is erected, a water pipe is installed. The outlet for the shower head hose must be made above head level. Otherwise the pressure will be too low. Now you need to install the tank. You can install a purchased plastic tank. Although, in order to save money, they usually use a barrel or any other container. Before the tank rises to the top, you need to make a threaded outlet and also install a tap with a nozzle. Now the tank or barrel should be securely fastened to the roof. As a rule, the water in a tub or tank is heated by the sun's rays. In order for the tank to heat up faster, it is pre-painted black. It is good to equip a greenhouse made of film around the tank: cover it with foil on the north side to reduce heat transfer.

A metal shower tank will never go out of style, but now plastic options are increasingly being used

• Lighting. When wiring for lighting, do not forget about the electrical installation rules. After all, the humidity in the shower is increased. Of course, you can do without electric lighting if you use the shower exclusively in the summer. A stream of light coming from a small window (above head level) with frosted glass will be sufficient. In spring, the days are somewhat shorter, so there will not be enough daylight alone.
• Ventilation. To improve air circulation and protect against condensation, it is advisable to make a hole in the ceiling and cover it with a decorative grille.
• Shower drain. How to build an outdoor shower, install pipes, install lighting - we figured it out. Now let's deal with the drain problem. With an increase in the average daily temperature, the workload of summer residents increases significantly and the load on the shower increases. But the temperature of the soil does not affect its drainage properties. It’s good if it is possible to combine the shower drain and waste pipe at home.

For quick disposal and good drainage of wastewater, the outdoor shower must be installed on a hill. The walls of the pit should be further strengthened to prevent collapse. Please note that the volume of the drainage pit must certainly be at least 2 cubic meters. meters.

A common mistake made by novice builders is placing the septic tank next to the wall of the shower stall or under the shower itself. If the volumes of water are large, the septic tank may overflow. Over time, drainage works worse and an unpleasant odor appears. With constant flooding, it is possible not only for the soil to shrink, but even to destroy the foundation, which is extremely dangerous. Therefore, the drain of a summer shower must be diverted several meters from the structure.

The water drainage is equipped with a waterproof layer using PVC film, roofing felt or hydroglass insulation. As an option, they make a concrete screed reinforced with a metal mesh.

Clay cannot be used as a waterproof layer. After some time, it will wash away and may contaminate the drainage ditch.

Installing the pallet

A tray will allow you to equip a summer shower with your own hands and ensure the drainage of wastewater for it. This can be a purchased pallet, a pallet made from a stainless steel sheet, or the cheapest option - a wooden pallet. Instead of a pallet, boards are laid, but not tightly, but leaving gaps for water. The lattice of boards is first sanded well with sandpaper and treated with an antiseptic. For convenience, you can put a rubber mat on top.

The simplest shower tray is made from ordinary boards

Waterproofing must be laid between the floor of the summer shower and the tray. For this purpose, roofing material is used. When installing the pan, you must ensure that the slope is formed towards the drain for unimpeded water flow. The pallet is screwed to the walls with self-tapping screws.

For more comfortable washing, so as not to have to stand on a metal tray, it is advisable to install plastic grilles.

Facing the structure...

An outdoor shower should fit harmoniously into the overall design of your yard. Any designer will tell you that for exterior upholstery it is better to use materials that complement the ensemble of nearby buildings.

The cladding of a summer shower is not only decorative; it is necessary to protect the walls from the effects of weather conditions. The surface of the walls can be plastered and painted or sheathed with vinyl siding, it all depends on the imagination of the owner, his financial capabilities and the features of the structure. For example, a summer shower made of polycarbonate on a frame does not need cladding at all.

On the left is the polycarbonate version; on the right is a shower lined with wood

A good option is to cover the walls and ceiling with clapboard. If the family will visit the dacha only in the warm season, then it is better to choose PVC film, thick colored (opaque) polyethylene or tarpaulin as a material for lining the summer shower. If the shower casing is removable, it can be easily stored in the pantry for the winter.

How to make a summer shower comfortable...

It is very convenient when the building is divided into two zones: a shower and a changing room. To prevent water from entering the locker room area, the floor of this area should be raised a few centimeters. A small decorative curtain made of polyethylene will also help protect clothes from splashes.

If you need to use the shower during colder periods, the walls will have to be insulated. For this purpose, polystyrene foam is used. This material must be used to fill the internal space of the frame. Next, the structure is covered with PVC film using a stapler and decorative slats. Already on top of the film, interior finishing is done.

If you are choosing materials to decorate an outdoor shower (there are plenty of photos on the Internet and in catalogues), try to pay attention not only to aesthetics, but also to practicality. Only moisture-resistant materials are suitable for finishing the inside of the shower stall.

A modern summer shower in the form of an extension to the house - why not an option?

For interior decoration, you can use thin linoleum, plastic panels, oilcloth or wood. If you choose wood, don’t forget to cover each board separately with hot drying oil, and only then begin finishing work. When facing internal walls, the material is run under the sides of the pallet.

To improve soil drainage, you can plant several moisture-loving plants near the shower. Green spaces absorb water. They will not only decorate, but also protect the space around the shower stall from waterlogging.

Thus, a do-it-yourself summer shower will become an indispensable outbuilding on a personal plot.

If you spend the warm season at your dacha or on a country plot, then before the start of the season you should spend some time and build a wooden summer shower with your own hands. Even if you have a shower in your house, such a structure will definitely not be superfluous: in the summer heat, dousing yourself with cool water, slightly heated under the sun, is really very pleasant.

Moreover, such a structure is quite simple to install, so even not the most experienced craftsman can cope with the task.

Tools and materials

Before we start work, we need to stock up on everything we need.

• Wooden beams with a cross section of 50x50 mm and a length of up to 2.5 m. We will need from 4 to 6 such parts for the manufacture of vertical supports.
• Beams or thick boards for the top and bottom trim, as well as to strengthen the frame.
• Wooden slats for flooring.
• Lining for covering the walls of a shower stall.

Advice!
The best option would be to purchase larch blanks.
Maple, pine and ash also tolerate loads well, but cope less well with moisture.
In principle, oak can also be used, but for this purpose it is too expensive.

• Water tank on the roof. It is advisable to purchase a special container with a wide neck and a lower pipe to which a faucet and shower head are connected.
• If necessary, a shower tray (you can do without it).
• Various accessories - towel racks, shelves, curtains, etc.

In addition, we will need consumables:

• Fasteners - screws or nails.
• Concrete for installing supports in the ground.
• Materials for constructing a drainage well or.
• A product for impregnating wood and protecting it from moisture and microorganisms.

As for the tools, here you can get by with a standard set:

• Entrenching tool for excavation work.
• Devices for mixing concrete (mixer or regular trough)
• Wood saw (circular, reciprocating or hacksaw).
• Drill or screwdriver.
• Building level.
• Hand tool.
• Brush or spray for applying moisture-proof impregnation.

When everything is ready, you can start working.

Drainage options

Drain pit

Before you start building a shower, you need to understand where all the waste water will go. The easiest way is to drain it onto the ground, but this is only possible if the shower is located at a distance from the site, and even on well-drained soil. Otherwise, we cannot avoid contaminated water getting into the beds or water intake sources.

Most often, a separate drainage well is installed for the shower:

• In the selected area, we dig a hole up to one and a half meters deep.
• We protect the walls of the pit from getting wet and collapsing by installing wooden formwork, ceramic brickwork or old car tires.

Advice!
The price of high-quality bricks is very high, therefore, for the construction of drainage pits, they most often use broken stones, or they take stones that have been used, but still retain their shape.

• We lay drainage material at the bottom of the well. For this purpose, either pebbles or large crushed stone are used.
• We make sides on top on which the frame of the shower stall will rest.

Septic tank or cesspool

If there is a cesspool or septic tank on the site, and we plan to install a shower no further than 10 meters from these structures, you can simply arrange a drainage ditch:

• In the place where the shower is installed, we dig a shallow (up to 30 cm) pit. It will contain .
• From the pit to the septic tank we dig a trench up to 20 cm wide. The optimal slope towards the drain tank is about 3 - 5 cm per 1 m.
• Next, you can proceed in two ways: either concrete the bottom of the trench and cover it from above, leaving several inspection grates, or lay a sewer pipe for external use. The second option is more preferable, and in terms of costs it will be approximately equivalent to the first.

In this case, all wastewater generated under the shower will be transported as quickly as possible to the septic tank, where it will be included in the process of waste decomposition and infiltration of purified liquid into the ground.

Important! If the design of your septic tank provides for regular pumping, then with the addition of a shower, the amount of drainage will approximately double. This fact should be taken into account when planning preventive measures.

Building a shower

Frame and sheathing

If we take the drawings of a wooden summer shower given in the article as a basis, anyone can build such a structure with their own hands.

However, beginners should carefully study the algorithm of work in order to avoid annoying mistakes.

• The shower stall usually has a small area with a significant height. This makes the structure unstable, which is why it is most often installed on supports buried in the ground.

Note!
This does not apply to lightweight portable showers with slatted frames - they are usually simply tied with wire to reinforcing bars driven into the ground.

• To install supports, we make nests up to half a meter deep in the soil.. We fill the bottom of each nest with gravel - it will prevent the stand from sagging under its own weight.
• We impregnate the lower parts of the racks with an antiseptic, wrap them in roofing felt and concrete them in the ground. After pouring the concrete, we adjust the position of the supports according to the level and fix them in a strictly vertical position.
• After this, you need to give the concrete time to gain strength.. Since the load on the supports will not be very large, the required 28 days are rarely waited: even a week is enough.

• At the bottom we attach a harness made of beams. On them we install either a pre-purchased shower tray or a grid of slats connected to gaps of 0.5 - 1 cm for water to flow out.

Advice!
The grate must be thoroughly sanded, otherwise the risk of getting a splinter in your bare foot will become very noticeable.

• We install cross members in the middle part and reinforce them with braces. We connect all the parts using nails or self-tapping screws, after impregnating them with a moisture-proof compound.
• We make the upper harness from the beams. We also install transverse joists that will support the water tank.

• We cover the outside of the shower stall with boards (lining is best). Most often, the sheathing is not brought to the floor by about 25 - 35 cm - this ensures optimal air circulation.
• We install a wooden door at the front with external and internal latches. Instead of a door, sometimes they simply hang a plastic curtain: this design is easier to manufacture, but less convenient to use.

Advice!
It is worth attaching several hooks to the outer wall next to the door.
We will hang clothes and towels on them: this way they will not get wet during water procedures.

Equipment and decor

All we have to do is install a water supply system.

And here it is best to implement classic solutions:

• We install a water tank on the top of the shower. An industrial container made of dark plastic, with a neck located on top and a nozzle for a shower head on the bottom, is ideal.

Note!
Instead of a factory container, it is quite possible to use metal barrels and polymer containers.
The main thing is that the structure is sealed and does not release toxic substances upon contact with water.

• In areas where the only source of water is a well without a pump, the tank must be filled manually using buckets. To do this, we attach a fairly strong ladder behind or to the side.
• If there is a water supply on the site (no matter whether it is central or autonomous), then it is much easier to connect a hose to the container on the roof. By connecting it to the water supply, we can quickly and effortlessly fill the tank with the amount of water we need.
• In summer, the water in the tank heats up quickly. But in spring and autumn, taking a cold shower is not very pleasant. To ensure more efficient heating, we build a slatted frame around the tank, which we cover with transparent film or glass. Such an improvised greenhouse will ensure a comfortable water temperature even on a cloudy day.
• We attach a watering can with a tap inside the cabin, checking the tightness of the pipe.
• On one of the walls we attach a shelf for soap and a hook for a washcloth.

After this you can use the shower. And in order for it to last as long as possible, before the start of each summer season the cabin should be sanded and treated with an antiseptic, and then either varnished for external use or applied wood paint.

Conclusion

A summer shower made of wood, made according to the above algorithm, is quite simple, reliable and convenient. However, you can always make adjustments to the design, introducing either your own ideas or technical solutions gleaned from the educational video in this article.