What do you need to make a table? How to make a table. Video: lightweight kitchen table with collapsible design

Let's sort it out practical advice, which facilitate the process of assembling a table with your own hands and help achieve best results. Construction country house is divided into several stages. A serious step is the arrangement of the dacha. Furniture plays an important role in the comfort zone. Wooden table complements general interior and improves the functionality of the room. But buying it may not always be successful, so we suggest you consider homemade version. It can be placed outdoors or in the house. Such furniture plays an important role in the arrangement.

As building materials we use either pallets or wooden boards. An unforgettable requirement for the material is the absence of moisture. With sufficient funds and desire, new boards will be very effective in construction. The quality and long service life of any furniture depends on the quality of the purchased materials for its assembly; how well they are treated before use. After successfully purchasing the necessary materials, and in this case these are wooden boards, stack them in rows and leave them to air. This type The longer the materials stand and ventilate, the better they will serve in the future.

Any furniture is primarily made only from dry wood.

As mentioned above, the tables are suitable for most different places and serve as a complementary element of furniture literally everywhere. Individual manufacturing methods are selected for each table. For example, you set out to decorate a gazebo with a wooden table. And this is quite convenient and correct, since spending time in a gazebo without a table in the summer is somehow uncomfortable. Just homemade furniture won't hurt at all. It is not necessary to glue the boards together during the work. It is enough to secure it using special fasteners. This approach greatly simplifies the manufacture of outdoor countertops. Or you can purchase them on the website https://stone-fortress.ru/. Firstly, you don't spend a lot of time assembling. Secondly, it is quite possible to replace the glue with others effective means, which means financial expenses will decrease.

Pallets like wooden parts, are very distinguishable by color. Accordingly, you visually decorate the table the way you want. Pallets have side parts. They are used as a frame. However, before this, the material needs to be sanded properly. It is worth considering that all the material will not be used up. The remaining planks can serve as fastening elements of the countertop. The fastening point is in the area of ​​the board joints. To join the board you only need two self-tapping screws. For the last solid one - one.

The sides and two boards will be used to build the frame. We secure the frame parts to the end using self-tapping screws. The frame does not need to be attached with self-tapping screws, just gluing it on is enough. Since the screws are long, we drill separate holes.

Our table will soon be released. All that remains is to turn it over and start sanding. Use coarse-grit sandpaper at first, and fine-grit sandpaper later. The next step is to install the legs. To do this, you will need four boards with exactly the same size. If necessary, of course, you will have to adjust the wooden boards in order to achieve an overall positive result. In this case, grinding is also an integral part of the work. Then each leg needs to be screwed on. To do this, you will need two self-tapping screws, which are important to be positioned diagonally from each other. Installing a jumper will help ensure maximum stability. The distance between the floor and the jumpers should be at least 10 cm. When everything is fixed, we begin to drill holes for the screws. This way we will secure the material so that it does not crack.

Now you have a complete design. Naturally, it doesn’t hurt to decorate it somehow. For example, start with painting. Of course, the first time a hard pile will appear. There is no need to be afraid, it is in the order of things. We take up the sandpaper again and begin to sand the surface until it becomes smooth. This amount of work will definitely create dust. Accordingly, you will have to get rid of it. Then we take up the varnish again and cover the surface with it. You may need to sand a third time, since the varnish will not lie flat the first time. In general, it all depends on the type of wood. So it’s better not to neglect unnecessary sanding, but to provide your wooden product with beautiful view. Having completed all of the above necessary procedures, we get a beautiful wooden table made by ourselves.

We will accept the option of making it from a newer material if you do not want visible traces of nails to remain or the boards will be frightening due to their heterogeneity. The tabletop is made by ourselves different shapes: rectangular, square and round. The result depends on your personal preferences.

Table made from leftover materials

Sometimes it happens that during construction or the next renovation of a dacha there are extra boards left various breeds. Instead of throwing them away, it is better to use this remaining material for more significant tasks. Make the same table. To do this, we select pine boards that will go on the frame (thickness 25 mm, width 50 mm). For the legs, we will leave planks 15 mm thick and 50 mm wide. As for the size of the frame, everything is purely at your personal discretion. This table is well suited for the veranda. And since this room is not large, it is advised to make it narrow (60 cm width, 140 cm length, height 80 cm). Of course, if family members are not tall, it is quite acceptable to play with the size of the tabletop.

Next you need to assemble the frame and secure the boards that act as legs. It is necessary to cut two boards 140 cm long. The width parameters are 60 cm. You need to subtract twice the thickness of the used board - 5 cm. That is, the used bars should be 55 cm. Now fold the frame by twisting the screws. How the bars were folded, everything needs to be double-checked. The diagonal arrangement of the bars is worthy of attention. If something doesn’t add up, you should definitely pass it on, since the design of the tabletop itself will suffer in the future.

Cut four boards and secure them inside the frame (80 cm long). Use four screws for each board. The bottom shelf can become a complementary element to the tabletop. To equip it, attach a crossbar in the middle of the two legs. It will serve as a frame for the future shelf. The work is done in a similar way with other pairs of legs. In addition to the fact that the shelf will provide more convenience, two jumpers significantly increase the level of rigidity of the structure as a whole. The fastening of the jumpers should be done strictly at a right angle (check with a special square).

Now the frame is ready, all that remains is to check it. If the structure is made correctly, the frame does not wobble. All that remains is to polish it. Next comes the assembly work. You may have boards of different colors left. Why not put them to good use. For example, arrange the boards on the surface in such a way that they alternate in color.

The last stage of making the tabletop involves fastening the boards with nails. We secure the shelf from below with nails or self-tapping screws. Again, you need to polish the assembled product. And finally all that remains is to paint. But it happens that you made a mistake with the choice of varnish or paint. So what should we do then? If you want to change appearance, you will have to sand the surface again. Next you need to start painting again with a new color.

Table with glued surface

The difference between the previous options is that the legs of this design go in the letter “L”. They are assembled from boards of the same width and thickness (20 mm thickness). Since the volume of the legs here is larger than the previous ones, more screws will be required (5 pieces). You need to drill holes with a diameter of 1-2 mm in advance (the hole should be smaller than the diameter of the screw itself). The second time you need to drill a hole with a larger diameter. It is intended for the screw head, which is then covered with a furniture plug. In other cases, it is preferable to choose a furniture-colored rod.

Another one great idea- This is furniture putty. Add wood dust to the mixture you will use to putty (take the leftover sanding). When the putty dries, traces of holes will be difficult to find.

Working on the legs

When assembling the legs, you need to carefully ensure that the angle is 90 degrees. If there is no pattern, use ordinary timber. To join two boards, coat one and the other with wood glue. Install the screws in the required places. When the glue dries, coat each leg with varnish. But before that, don’t forget to sand it.

Assembling the tabletop

As the legs are done, the turn goes to the top of the table. The tabletop is made of boards of equal thickness. Choose the sizes you want. Boards can be of different widths. It is important to maintain an organic appearance. It is important that the side parts of the boards align smoothly with each other without gaps. We also lubricate the side of the boards with glue. Next, lay them flat on the surface.

To avoid possible gaps, tighten the boards with clamps. Leave the table surface overnight. After a day has passed, remove the clamps - the tabletop is already ready. As before, sand the surface and smooth out the edges. Using a jigsaw or saw, start trimming. Sometimes a grinder is also used, but in this way it is difficult to ensure an even line. And now the sanding stages are over, and you get a completely flat tabletop with a diligent appearance.

Glued board tabletop

Using the above method, make a round, oval or any other shaped tabletop. Of course, you can achieve evenness of the cut tabletop if you draw in advance the lines along which its shape is cut out. Attractive view can give frames and make them better with my own hands. Take a thin strip and sand it. Fasten according to the perimeter of the tabletop. Finishing nails and glue are suitable for fastening (first of all, you need to treat the planks with glue). The glue will dry, and the plank will need to be sanded at the joints.

There is no table without legs

The tabletop is ready, which means it remains to put the table on its feet. To attach the legs to the main part of the table, you will need a frame made of boards. It is attached to the back with glue. But this is not enough, because you need to secure it from above, using confirmations. First, you need to drill holes on the tabletop with a diameter for the hat. And then mask them off like you did the previous holes. Now the table frame is firmly secured, begin attaching the legs. The connection point must be inside the frame. For fastening we use ordinary self-tapping screws. The table is ready!

Table and benches in the garden

Boards can be used to make tables and benches different sizes. To connect the benches to the table, 16 cm studs are used (in addition to them, washers and nuts). Other connecting fasteners - no longer than 80 mm. So, each part of the garden table is installed on its own Right place. Then through holes are drilled with a drill. And then, as you yourself already understood, it’s time for the washers and nuts.

When tightening nuts with washers, it is better to use wrench. Thanks to this approach winter period you can easily unwind the structure and take it to a warehouse, garage, shed or any other place for storing similar things.

Each board should be carefully sanded and trimmed. To fasten the three boards that are intended for seats, you need to cut short bars. We cut each of them at 45 degrees. The first step is to start assembling exactly that part of the structure that is located below. We take one large board (160 cm in size) and attach small bars to it. At the moment of joining, they should be fastened in the middle of one large one. Now we add legs to this structure (fasten with nails). Add short boards again. All these elements need to be tightened with studs, bolts and nuts. This creates a support unit that secures the seat from below.

All that remains is to attach the boards for the seats. By the way, if this design intended for the street, it is not at all necessary to make a narrow gap between the boards. At least 5 mm is enough. The planks are attached to sawn supports. We have formed two shops. It wouldn’t hurt to secure them with four 160 cm long boards. To secure all four legs, use 2 pins for each leg. Install them either at the same level or diagonally.

Table for kindergarten

The principle of assembling a table is completely different from previous versions. The tabletop is supported on boards that are cut at 52 degrees on the sides. The sawn supports must be positioned in such a way that the legs for the table can fit between them. Secure them with finishing nails. If you do not want to allow the caps to be clearly visible, drive them deeper. Simply coat the surface with a special lubricant as a mask.

The table legs here are not standard, but look like crosspieces. To assemble them, take two boards and cross them in such a way that at the bottom the gap between the objects is 65 cm. In the middle of the boards, leave a mark for crossing the boards. The mark is drawn in the shape of a square and half the thickness of the board itself. The same thing needs to be done on the other board. We get two materials of the same plane. The joining process takes place using four nails. The second pair of legs is made by analogy.

Now we have to assemble the table as a whole. First of all, the most important thing is to secure two pairs of legs into the main structure on which the benches are placed. We place the legs parallel to each other in the middle. Naturally, they need to be secured with pins so that they do not fly off in the future. The tabletop is attached using a similar method. Once the studs are screwed in, start sanding and painting. Paint the structure in any color that suits you. In addition to this design, those options that involve a separate table from the benches are also acceptable. The structure is assembled in a similar way. Of course, except for the seats.

Making a wooden table with your own hands, as it turned out, is not so difficult. There are moments that require utmost attention to some things during manufacture. If you follow the above recommendations, your table will turn out perfect. Choice good materials And competent execution work will be provided by the product for a long time services. The design will impress with its functionality and decent appearance.

Video: DIY wooden table

Photo gallery: DIY table

If you dream of having a good time on your personal plot, then you just need big table, which can accommodate a group of your friends and family. Moreover, you can do it with your own hands, spending very little time on it. In some cases you may need a helper, sometimes an extra pair of hands won't hurt.

This article is a detailed step by step instructions manufacturing wooden table for the dacha.

Materials:

• A - Legs: 5x10 cm bars, 106 cm long (2 pcs.), 43 cm long (2 pcs.) and 56 cm long (2 pcs.);
• B - Frame: bars 5x10 cm, length 87 cm (2 pcs.);
• C - Tabletop: boards 5×15 cm, length 180 cm (6 pcs.);
• D - Tabletop base: boards 5x15 cm, length 87 cm (2 pcs.), bars 5x10 cm, length 62 cm (2 pcs.).

The first stage of the project is making the table legs. Saw off the bars required sizes. To speed up the process, you can use circular saw. Smooth the edges of the bars and cut lines sandpaper.

Connect the bars to form an X-shaped structure and fasten them with 60 mm self-tapping screws, not forgetting to pre-drill the guide holes. Lubricate the joints with glue. Make sure there are no cracks or gaps.

Fasten each pair of legs with a horizontal block, using 60 mm self-tapping screws for this purpose. Cut off the ends of the bars as shown in the figure.

Place the boards intended for making the tabletop on a flat surface. We advise you to place pieces of 6 mm plywood between them, this will create uniform gaps. Place the assembled table sides on the tabletop and secure them by screwing in self-tapping screws at an angle of 90 mm. Before fixing, make sure the legs and table top are perpendicular using a spirit level.

Place sawn pieces of 5x15 cm boards on the underside of the tabletop and secure them with 60 mm self-tapping screws.

Saw off the ends of the bars, which will serve as supports reinforcing the structure, at an angle of 45º. Place the supports in their place and secure with 90 mm self-tapping screws screwed in at an angle.

And finally, last but not least: check that the heads of the screws do not protrude above the wooden surface, and fill all cracks and holes with wood putty.

Tip: To protect wooden surfaces from the damaging effects of atmospheric moisture, cover them with several layers of exterior paint or stain.

Table with benches. Instructions with drawings

Materials:

• A - Legs: bars 5x10 cm, length 95 cm (4 pcs.);
• B - Crossbars: bars 5×10 cm, length 160 cm (2 pcs.);
• C - Fastening the tabletop: 5×10 cm bars, 75 cm long (5 pcs.);
• D - Inclined supports: bars 5x10 cm, length 84 cm (2 pcs.);
• E - Tabletop: boards 5x10 cm, length 180 cm (14 pcs.).

You should start by making the legs. Since the legs of this table will be inclined, the ends of the 100 cm long bars should be cut at an angle of 30º. Connect the elements with 90 mm bolts.

Make sure the surface you are working on is fairly level. The mounted sides of the table must be identical, only in this case can you hope for an excellent final result.

When the sides of the table are ready, you can start making wooden table top. We recommend that you knock it together on the ground (floor), and then attach it to the legs using self-tapping screws.

Tip: Don't forget to make sure the side walls of the table are vertical using a spirit level, otherwise the end result of your work is unlikely to satisfy you.

Rigidly fix the entire structure using inclined supports. Their ends should first be cut at an angle of 26º.

Now all that remains is to build the benches. Saw off the boards the right size, place them on both sides of the table and, having previously drilled several guide holes at a distance of at least 1 cm from the edges, secure them with self-tapping screws.

Tip: To ensure that the seat boards are evenly distributed, place nails or pieces of plywood between them before attaching them. Thanks to this little trick, all the gaps will be the same.

At the end of the work, pay attention to small but very important touches. Fill all cracks and holes with wood putty. After the putty has dried, sand the wood surfaces with medium-grit sandpaper.

Tip: Be sure to apply several coats of paint or stain to protect wood surfaces from exposure to water and sunlight.

Round table. We do it at the dacha on our own

Materials:

• A - Base: 5×10 cm block 102.5 cm long (1 piece) and 47 cm long (2 pieces), 2.5×10 cm block 9 cm long (4 pieces);
• B - Stands: bars 10×10 cm, length 60 cm (4 pcs.);
• C - Tabletop base: 5x10 cm bars 82.5 cm long (1 pc.) and 52.5 cm long (2 pcs.), 2.5x10 cm bars 47.5 cm long (4 pcs.) and 60 cm long (2 pcs.) ;
• D - Tabletop: boards 2.5×15 cm, length 195 cm (9 pcs.).

The first stage of the project is to create the table base. To connect its constituent elements, use waterproof glue and self-tapping screws. Make sure that the corners formed by the bars being connected are straight. To protect the assembled table base from rotting under the influence of rainwater, place it on small stands made from scrap 2.5x10 cm boards.

Now you need to attach four posts made from square bars to the base. Before fixing, make sure they are vertical using a spirit level. The height of the legs may differ from what we propose; in this case, you should, first of all, be guided by your own needs.

The most difficult stage of the project is making the countertop. Place the boards on flat surface and mark the center of the square. Secure one end of a 60 cm strip at this point. Rotate the other end of the staff to mark the outline of the circle. A jigsaw with a sharp blade will allow you to make circular cuts at a high professional level.

After cutting the boards of the future tabletop, we recommend that you fasten them together waterproof glue and additionally secure with several clamps. Attach the bars that serve as the base of the tabletop, as shown in the picture (yellow elements should be made from 5x10 cm bars, green ones from 2.5x10 cm bars).

Tip: To attach the bars to the tabletop, use waterproof glue and galvanized screws (30 mm self-tapping screws for fastening 2.5x10 cm bars and 50 mm for fastening 5x10 cm bars).

After the glue has dried, you should attach the legs to the base of the tabletop using 90 mm self-tapping screws, having previously drilled pilot holes. Use a spirit level to check the perpendicularity of the legs and tabletop.

To ensure that the result of your work corresponds to the highest professional level, make sure that the screw heads are recessed deep enough. Cover all cracks and holes with wood putty, and after it dries, sand the surface with sandpaper.

Tip: Apply several coats of exterior paint or stain to protect the table from moisture damage. To ensure that the base stands are also untouched by water, place the table on concrete surface and seal them hermetically.

Now you know how to make a picnic table yourself. You just have to put in a little effort, which will subsequently be rewarded with enthusiastic exclamations from friends and pleasant summer evenings spent with your family at a large table.

An integral attribute of every home is Coffee table ik. At first glance, it may not seem the most the right furniture, the purchase of which is postponed for a long time.

But it is precisely such interior items that make it truly cozy and comfortable. On the coffee table you can place all the things you need that should be at hand: books, remote controls, keys and other small items.

DIY wooden coffee table

If you still haven’t been able to choose the option that suits you or have difficulties with the design, we will share with you ideas that will tell you how to make coffee table with your own hands.

A wooden coffee table will fit perfectly into almost any interior style.

Wooden coffee table

The tree is especially popular among many various materials, from which furniture is made. If you properly care for wooden furniture, it will last you a very long time. In addition, by working independently, you can create a unique piece of furniture.

To make a wooden coffee table yourself, you will need to prepare everything necessary materials and tools. Ready design you can place it directly on the floor or additionally make four legs on which your table will be located.

An example of how you can make a coffee table with your own hands from wooden pallets

Using multiple drawers, you can also create great coffee tables for your living room. Four large drawers fastened together form a stylish table. There is usually a gap in the middle of the drawers that can be decorated with various items.

Living room table made of wooden boxes

Photo: DIY coffee table

A coffee table made of wooden drawers is a great place to store all the necessary things

DIY rectangular coffee table

Modern look

You can also make a table that will look modern and stylish. But before choosing a specific design for the table, determine the overall composition of the objects in the room. It is important to maintain a consistent style in every item that is used in the room.

Stylish wooden table with metal legs

Pay attention to retro style, which is also particularly popular today.

A real work of art - an elegant low coffee table made of wood

An effective design move - a furniture duo in the living room

Decorating a coffee table

You can turn your coffee table into a stylish and topical subject interior using decor. Thanks to this, the most inconspicuous table will become a real work of art. You can decorate it with anything: old wallpaper, shells, mirrors, fabric or mosaics.

Use textiles to decorate your coffee table to give it originality

Think about your mood. After a long day of work, you want to return to an atmosphere of calm, comfort and coziness. Therefore, for table decor, it is better to select elements that will fit perfectly into the overall interior of the apartment and will not disturb the harmony.

Mobile coffee tables on wheels are a beautiful piece of furniture that will transform any living room.

Materials and items that can be used more than once

Wooden pallet – universal item, from which you can make anything with your own hands. Perhaps the easiest way to build a coffee table, since the pallet is, in fact, a ready-made tabletop. It can be painted in any color, applied with a pattern, symbol or ornament. Wheels or wooden blocks can act as legs.

Turn a wooden pallet into practical designer furniture

Table design options depend only on your skills, preferences and, of course, the interior of the room

A glass tabletop can set the tone for the entire interior

Suitcases and old radiators

Your old suitcase can become an integral part of your apartment's interior. To make it into a table, you just need to attach four legs. A coffee table made from a battery will also look unusual and original.

DIY coffee table from an old suitcase

Wooden coffee table on wheels in the interior

An irreplaceable thing in any interior is kitchen table. This furniture attribute can perform many functions. Tables can be more than just dining tables. For example, using a table similar to a bar counter, you can successfully divide the space of the room. At the same time, it will also fulfill its intended purpose. You can get acquainted with many similar ideas by looking at the photo of the kitchen table in any catalogue.

The type and purpose of the table depends solely on the wishes and needs of the owner. Currently on sale huge assortment furniture from which you can choose the appropriate option.

But if you want to save money or want to be original, you can make the furniture yourself. Therefore, let’s look at what and how you can make a kitchen table with your own hands.

Types of kitchen tables

If you decide to make a table yourself, you must first carry out preparatory work. Preparatory stage involves choosing the style, shape, and size of the future product. It is also necessary to calculate and prepare the location for its installation. If the table is built-in, consider mounting options.

There are many types of tables, for example the following:

• classic;
• corner;
• transformers;
• retractable;
• folding

Tables can be made into cabinets or drawers. When choosing the type and size of a table, you should focus primarily on the size of the kitchen, the purpose of the future product, as well as the style in which the room is being furnished.

In a small kitchen, it would be appropriate to use a folding, corner, or bar table. Any ideas on how to make a kitchen table are welcome. Thanks to this solution, a significant amount of space is saved.

To save space and ensure the functionality of furniture, it is recommended to use transforming tables. Small table, which folds out into a large dining table, performs two tasks at once.

A great idea to save space in the kitchen are tables that slide out from kitchen set. And the option of a bar counter is suitable as a division of space in large kitchen or a studio apartment.

Material selection

For the manufacture of classic version dining table perfect natural wood(oak, walnut). Inexperienced craftsmen are advised to choose pine boards, as they are easier to process. Such furniture will add luxury and elegance to the interior. But it's worth remembering that wooden crafts require special care.

The most popular material for making furniture is chipboard. Its main advantage is affordable price. But when purchasing it from an unverified manufacturer, you cannot be sure of the safety of the material.

More reliable and safe material MDF can be considered from this category. You can also purchase special furniture panels.

Metal can be used for the kitchen table, it is better to choose stainless steel. Metal furniture differs in durability. But such a product will cost a lot, and you will also need to use tablecloths.

Making a wooden table

Before you start work, prepare a drawing of the kitchen table and necessary tools. It is better to purchase the legs ready-made. To make a tabletop with a width of 80 cm, you need dry boards 1 meter 20 centimeters long.

Each board is sanded so that the edges are perfectly smooth and there are no voids at the joint. Connect the prepared boards with dowels. Place them in opposite directions to avoid deformation.

According to the instructions on how to make a kitchen table, you need to make holes at the end of each board, the distance between which should be no more than 15 centimeters.

Attach the table legs to the base using screws. Make holes for attaching the tabletop in each longitudinal board. The tabletop can be attached to the base after twelve hours, when the glue has dried. The finished table needs to be painted or its surface varnished.

Note!

Photos of DIY kitchen tables

Note!

Note!

Of the abundance of furniture on offer, wooden tables and chairs remain popular everywhere. Natural materials ensure environmental friendliness, safety and durability of the models. Solid wood furniture can be found in any country house, apartment or office.

In addition, you can make wooden furniture yourself.

Wooden kitchen tables

There are a few things to consider before purchasing a table. The comfort and mood of household members in the kitchen depends on them.

Ergonomics

Due to the fact that in small apartments usually there are kitchens small sizes, do not forget about ergonomics. First of all, when choosing a wooden dining table, you should take into account the comfort of being around kitchen items furniture.

It’s not comfortable when you rest your elbows or feet on your neighbor or on the legs of the table. In addition there should be optimal distance from the table to other pieces of furniture. The table should be located approximately 80 cm from walls and other objects in the kitchen.

The height of the table also plays an important role. It should be selected depending on the height of the people sitting behind him. Low (70-74 cm) tables are recommended for short people. Those whose height is between 1.6 m and 1.7 m should buy tables with standard sizes(75-76 cm).

Appearance of the tabletop

Before choosing a tabletop design, you need to calculate how many people typically need to be seated at it. Shapes are found: oval, round and rectangular and square.

Tables that do not have corners should be placed in spacious kitchens. Tables with a square or rectangle shape fit perfectly into small spaces. You should see if the appearance of the table matches the overall interior.

Practicality

There are many models that provide additional functionality, namely, they replace a cabinet and can be folded and unfolded if necessary.

A wooden extendable table is perfect solution for those owners who suffer from a lack of space in the room for eating.

Like any furniture, these products have a number of positive and negative qualities. Wooden tables for the kitchen have the following advantages:

• uniqueness and originality of wood texture, which cannot be recreated;
• ability for a long time withstand shock and everyday use;
• environmentally friendly, thanks to natural material that does not contain glue and does not emit harmful substances in atmosphere.

Negative characteristics include: high cost, vulnerability to moisture and dampness. At elevated temperature the material may dry out, thereby causing cracks and loosening of the table. Over time, the surface may darken or be attacked by pests.

Wood table in the living room

Recently, it has become fashionable to decorate living spaces in white colors. A combination of white furniture and light-colored walls and windows is actively used. Dark and White color can also be combined in furniture.

For example, the tabletop may be white, while the legs and edging of the table are dark. Such furniture is often used when decorating a room in a minimalist style. In a spacious living room or studio, a white wooden table will be an excellent solution.

The glass and wood table is often found in front of the sofa, comes in a low size and is used as a fashionable piece of furniture in the living room. It is intended for drinking tea in front of the TV, storing books and magazines, and also for working in front of a laptop.

Solid wood table in the country house

On a personal plot, the most important place for gathering loved ones and guests is a gazebo or outdoor space.

In nature, one is drawn to everything natural, so a wooden table for a garden is a combination of beauty and practicality in one item. Besides this element The furniture goes well with the overall rustic style.

Wooden tables for a summer cottage should not only be durable, but also moisture resistant. If the table will often be exposed to moisture, you should choose a product made of larch.

Country tables should have the ability not to deteriorate under the scorching sun. Due to its density, the best material For country table considered walnut or oak. This wood is considered hard and expressive. To resist pests, oak is stained, that is, kept in water for some time. Such material is more expensive than its counterparts.

You can save money if you choose a table from coniferous species tree. They have lightness, pleasant color, smell and moisture resistance. Increased content resin resists water absorption.

How to make a wooden table yourself?

Some summer residents make tables themselves. Creativity and hard work will allow you to save money and create a unique thing on your summer cottage. Making a wooden table with your own hands is not at all difficult. It is enough to have in your arsenal the necessary materials, tools and a little time.

Tools and materials needed for manufacturing:

• plane;
• sanding machine or paper;
• screwdriver with a set of bits;
• jigsaw or saw;
• chisel;
• staining and varnishing agents;
• metal corners;
• yardstick;
• building level;
• accessories for fastening (screws, bolts, self-tapping screws);
• boards 40 or 50 mm thick;
• 4 bars for wooden legs table size 50x50 mm;
• auxiliary boards 40 mm thick for attaching the tabletop.

Procedure (step by step instructions)

• Decide on the dimensions of the future homemade product. If the table length is greater than the standard values, it is necessary to install at least four racks.
• Pre-plane the boards for the tabletop and saw them to the required size.
• Place five boards in parallel, fasten them from below with self-tapping screws to the auxiliary cross boards. It is necessary to leave space for the table legs.
• Install the bars for the legs using metal corners and secure them to the tabletop.
• To prevent distortions and stability of the legs, pass the strips around the perimeter under the tabletop. If the table has more than four legs, an additional cross bar must be strengthened in the middle.
• Clean the edges of the table top with sandpaper on all sides.
• Cover the product with pest repellents (stain) and, if desired, apply a layer of varnish.

There are many ways to create a table with your own hands. The final version of the homemade wooden table we proposed can be seen in the photo.

Wooden tables for kids

When a young child grows up and begins to sit independently, the time comes to feed him various complementary foods.

A wooden feeding table is the most good option furniture designed for comfortable eating. Tables are usually made together with chairs and have a common design.

There are several types of children's chairs:

• transformable chairs
• chairs with adjustable backrest.

In the first case, the seat height is adjusted according to purpose. A child can not only eat at the table, but also play if you remove folding table made of wood and lower the seat.

In the second case, the adjustable seat height allows you to raise the baby higher or lower it safe distance to the floor. Even if the maneuver is unsuccessful, the child will not be able to harm himself and will give the mother the opportunity to do everyday chores in the kitchen.

Buying wooden tables for feeding, parents do not have to worry about the health of the child - allergic reactions he won't have it. Therefore, natural wood material is most often used to make children's furniture.

When buying a table you should pay attention to sharp corners, which can cause unwanted damage to its little owner.

Finally, I would like to say that thanks to wooden furniture There are many possibilities to equip your home with different designs. Particularly popular country style using natural materials and copying the antique interior.

Safety and your own health directly depend on the type of materials that are in your home.

Another important fact is that wood is a material that can be worked with without using complex tools and equipment. Thus, any man is able to create beautiful things on his own for reasonable money.

Photo of a wooden table