Drawing of a wooden vase. Decorative vases for the interior - crafts from wood cuts. Video: DIY decorative branches for a floor vase

If you have it on hand professional tool, you can master its capabilities endlessly. For example, an ordinary construction lathe is often used as a basis for making souvenirs and various decorative items. Beautifully crafted wooden candlestick on lathe looks great in classic interior Houses. A large vase made of wood can amaze the imagination. Sometimes in my hands experienced craftsman a seemingly ordinary piece of wood turns into a real artistic masterpiece. How do they do it? What else can you grind yourself?

A wood lathe allows you to make not only construction blanks, but also various decorative items, which are designed to please the eye and demonstrate the capabilities of the equipment. Any crafts made from wood are very practical, they will always have a place in the house, so you can safely experiment and try to do something with your own hands. The easiest way is to turn a vase from wood; you can easily get a jug, a salt shaker and a box for storing all sorts of small things. You can suggest making chess.

Vase

How can you make a vase on a lathe? To make it, you may need a certain tool. In addition to the lathe, you need to take cutters, a plane, a hacksaw, a ruler, a compass, an ax and a saw, sanding paper and a chisel.

The process of turning a vase is extremely simple. True, it should be noted that vases can be complex in configuration and simple. Let's look at how you can carve a simple option.

• First, a block of wood 10-20 cm long is cut out with a saw.
• It must be trimmed with a plane, both from the ends and along the length.
• The workpiece is installed in the machine chuck.
• The machine is turned on and checked for runout of the part.
• If it is present, alignment must be carried out.
• The top layer of wood is removed to a depth of 1 cm.
• A chamfer is removed at an angle of 45° from the outer end.
• IN tailstock the drill is inserted.
• A hole is drilled with a depth less than the length of the workpiece by 3-5 cm. That is, the bottom of the vase is determined.
• Now, using a cutting tool called a jamb, the cavity of the product is cut out.

Since the vase can have different shapes: straight, oval, and so on, then, accordingly, the boring of the upper surface is maintained in an exact shape. After which the product is polished outside and inside. What is it used for? sandpaper. The wooden product is removed from the machine, the bottom is finished by hand using a plane and sandpaper. After which the souvenir is varnished.

Chess

Chess figures are small, so their manufacture requires a certain amount of experience and firmness of the turner's hand, as well as his eye. To make a figure you will need a small block of wood with a cross section of 50x50 or 60x60 mm. On one side, it is formed into a smaller section, for example, 40x40 or 30x30 mm, as shown in the video.

With this smaller end, the workpiece is inserted and clamped into the chuck. Now you need to cut the free end of the blank with a cutter and press it with the center of the tailstock. A layer of wood is removed with a cutter so that the workpiece becomes round section. Then you can start making your own chess piece. Can be used traditional forms, you can dream up.

As soon as the figure is completely ready, it must be sanded and finally cut off from the pressed part of the workpiece. All that remains is to manually varnish it or paint it black or White color. By the way, a wooden candlestick is made on a lathe in exactly the same way. Its length is greater, which means a longer workpiece will be needed.

Making a box

The box is not the most difficult element that can be turned on a lathe. But if this is a product with a lid, then drawings will be required here. After all, the lid must fit into the box and sit on the groove, that is, the lid must be flush with the edge of the product itself.

To make a box you will need cylindrical blank, which is installed in a lathe. The main thing is that the workpiece does not reach the bed.

• First, a layer of wood is removed with a semicircular cutter to give the workpiece a rounded shape.
• Then you need to work the surface with a joint, that is, make it smooth.
• After which it is necessary to form an internal cavity wooden product. For this, a narrow straight cutter is used. This operation cannot be completed in one pass, so you will have to carry it out in stages.
• Using a triangular cutter, you can expand the internal cavity to the thickness of the walls.
• The bottom of the box is leveled with a straight but wide chisel. They also make the groove for the lid.
• The internal and external surfaces are polished.
• Apply varnish on top, wax on the inside.

The lid is made of the same material as the box itself. It just requires a thin workpiece, which is fixed in the chuck of a woodworking lathe. First, processing is carried out with a wide straight cutter, that is, it is formed inner part, it can be flat or concave inward. Sanding is required.

Then the outer part is formed, for which the workpiece will have to be turned over. That is, the half-finished part of the lid is cut off and the almost finished inside installed in the cartridge. Then the same cutter is used to form outside covers. It can also be flat or convex. Finally, sanding is carried out. Then ready product varnished.

In principle, the order in which the sides are made can be changed if there is a handle-holder on the lid. To do this, you will have to take a thicker workpiece to sharpen the handle. It can be round, oval or shaped. You can make the handle as a separately turned element and attach it to the lid of the box with adhesive.

The diameter of the lid must correspond to the diameter of the inner groove of the box. That is, the cover should fit freely into the groove.

These are the products you can make with your own hands on a wood lathe. The most difficult of the above decorative items- this is a box. Here it is necessary to strictly adhere to the dimensions, especially with regard to wall thickness. We made it a little thinner, and there is a high probability that it will burst over time. In addition, you will have to strictly adhere to the diameters of the lid and groove on the box itself. If one of the sizes does not match, then either the lid will fall inside the box, or it will end up on the edge of the product.

Therefore, when turning on a lathe homemade crafts wood requires attention and accuracy (the work is not rough). Of course, it is necessary to take measurements with a caliper during the work process.

Geometric shapes and natural materials are increasingly becoming integral attributes modern interiors. Decorative details, such as vases, look great in this design.

Materials

To make a vase from a single piece of wood with your own hands, prepare:

• a piece of tree trunk already dried;
• wax or wood stain;
• epoxy resin;
• saw;
• grinding machine or sandpaper;
• drill and drill bits;
• chisel;
• chisel;
• hammer;
• roulette;
• press drill.

Step 1. Take a prepared piece of wood. Please note that it must be of high quality and suitable for the job. Raw material must be straight without significant defects. It needs to be cut to the height that suits you.

Step 2. Use a hammer and chisel to remove the bark from the prepared piece of trunk.

Step 3. Make a rough adjustment to the desired parameters using a saw.

Step 4. To maintain the characteristic natural wood pattern of fibers and demonstrate them in all their glory, the resulting piece in the shape of a parallelepiped needs to be given irregular shape and make small edges across the entire surface under different angles. To do this, also take a chisel or saw, and then carefully sand the workpiece.

Step 5. Now you need to make a characteristic recess in the vase. IN in this case A press drill was used for the work. You can replace it hand tools. Be careful, the hole should never be through. Received internal walls Vases definitely need to be sanded.

Step 6. Finish each side of the vase by hand. You need to outline their shape and make the cuts perfectly smooth. When sanding, be sure to process the fibers, moving from the bottom and top of the product to the center, observing the direction of their growth.

Step 7. To give the vase an aesthetic appearance and finally record the result obtained, materials for finishing. This is wax or stain. After applying the coating, be sure to polish the surface of the vase. To protect the inner walls of the vase, you can treat them epoxy resin, applying it thin layer on the walls several times.

Vases can be a wonderful interior decoration. You can even create some of them yourself. Vases can be decorated and transformed very quickly, even with your own hands. This will allow you to create more and more new distinctive features in the interior.

1. Original filling of the vase

Great option filling a vase with wine corks, with the help of which the vase is immediately transformed.

2. Lemon vase

A simple, but at the same time very bright option for decorating a vase using lemon decor, which will be just a godsend.

3. Small vases made from bottles

A beautiful option to create many mini-vases with your own hands from ordinary bottles.

4. The vase is decorated with beads

It is possible to transform and decorate a vase with the help of beads, which will create a truly beautiful vase in a minimum of time and money.

5. Wooden vase decor

Nice decoration of a vase using branches, which will add lightness and unobtrusiveness to the interior of any room.

6. Stylish and simple vases

Beautiful design of small vases that will decorate any home.

7. Vases are decorated with cord

Using thread or cord, you can create unforgettable vases that will be simply an excellent solution for decoration.

8. Regular bottle design

An excellent option is to decorate an ordinary bottle in the form of a beautiful vase, which you will definitely like.
9. Transformation of bottles

A nice solution to create beautiful vases from ordinary bottles that will become a godsend.

10. Decorating vases with sparkles

An original solution for decorating vases using gold sparkles.

11. Cute glitter vase

A great option to create an original and pretty shiny vase that will decorate any interior.

12. The vase is decorated as a candlestick

One of the fastest and simple options, so this is the creation of a candlestick from a vase.

13. Perfect combination

If you combine several bottles of the same shape, you can get a custom vase with cells like this.

14. Vase made of tree branches

Cute and very interesting option create a vase from tree branches that will transform the interior of any room.

15. Bright painting of a bottle decorated as a vase

An excellent and very interesting option for painting a bottle that became a vase very quickly and easily.

16. Original tied bottles

Decorating bottles is a very interesting and difficult moment that is worth taking note of and making the most of in practice.

17. Vase decor using pencils

An original option is to decorate a vase using ordinary colored pencils, which will be a godsend for any interior.

18. Decorating bottles with thread

Nice idea to decorate regular bottles using a thread, which will simply be a discovery and will allow you to create original vases.

19. Decorating an ordinary transparent vase

Quick and simple decoration of an ordinary vase, which in as soon as possible will transform the interior.

20. Painting wine bottles

Decoration wine bottles using hand painting, which can be even more attractive than this.

21. Vase decor using wood

An original design of a flower vase using wood, which looks charming and delicate.

22. Custom wire vases

Beautiful and perhaps very original version create a vase out of wire, which looks very interesting.

23. Excellent table decor

One of the best and simplest options for decorating a table is using a cute vase that you will like.

24. Cute DIY vases

You can decorate any of the vases with your own hands in a wide variety of ways that you will definitely like and inspire.

25. Successful vase decor

A nice solution to elevate an ordinary transparent vase using burlap and accessories.

26. New Year's vases

Interesting decor of vases New Year's style, which will simply be the highlight of any interior.

27. Original vase with a transparent bottom

Cute and very interesting example designing a vase with a transparent bottom, which will become a feature of the interior.

Today we have another useful homemade product for home and garden made of wood - segment turned vase

A chiseled vase-breadbox with dimensions of 20 cm x 8 cm. assembled from several types of wood: pine, apple and oak. After assembly and gluing, the elements are ground and the finished product is coated with non-toxic varnish in three layers with intermediate manual sanding of the first two layers. Base ten mm plywood good quality. First, squares of dark and light wood are glued onto the plywood (using PVA glue) in a checkerboard pattern. The workpieces are cut using tools to obtain accurate and uniform dimensions in terms of thickness and linear dimensions.

The next stage is turning the bottom on the machine. Before this operation, the sides of the square are cut to obtain an approximate circumference. The center of this circle to obtain a symmetrical pattern on the bottom is made before trimming the excess, i.e. on a square blank. Then the bottom was attached to the plan washer with self-tapping screws and everything was installed on the machine. Turning is carried out both along the radius and along the surface of the pasted pattern.

If you are making several vases at once, then when removing the part from the washer, you need to make a mark on the part and on the washer for subsequent installation in the same place. After processing the bottom, blanks for the walls of the vase are glued. As you can see from the photo, the shape of the blanks is needed in the form of a trapezoid. To do this, cut blocks of dark and light wood, glued together in pairs and only then cut to a trapezoidal shape.

The main thing in this work (preparing wall elements) is to have the same dimensions of the bars in height and along the lengths of the sides of the trapezoid bars. In fact, when gluing subsequent rows, it is necessary to control the distance of each bar from the center and from each other in order to obtain identical holes in the walls of the vase.

If the height of the vase is small, you can glue all layers at once. PVA glue dries and gains strength in no more than four hours. Obviously, the blanks of each subsequent row will be longer if you want to make the same holes in all rows. The number of blocks in all rows will always be the same.

With a slight change in diameter, you can get by with an increased width of the bars. In this case, there will be more waste in the form of chips. The vase, fully prepared for turning, is installed according to the marks made. Particular care is needed when turning objects with holes - do not overdo it, remove the chips little by little and work only with sharpened ones. You do the grinding without removing it from the machine, sequentially with several types of sandpaper, and it is better to do the latter with the same shavings.