How can you cut laminate if you don’t have a saw? How to cut laminate: selecting a tool. How to choose the optimal tool

They allow you to create an original look for the floor in any room. The slats are presented on the market with various patterns that imitate not only the traditional texture of wood, but also stone, metal and leather. That is, in terms of stylistic diversity this material is superior even to natural parquet. It would seem that in terms of installation, the slats require much less effort, but this is not the case. Simple typical installation may become more complex if non-standard deck formation configurations arise. In such cases, the question arises about what to use to cut the laminate. Luckily, you don't need a specialized tool to accomplish this task. You can limit yourself to the usual equipment, which is likely to be found in the households of many home craftsmen.

Hacksaw as the most affordable option

If there is not much work, and we are not talking about obtaining an ultra-precise cutting result, then you can limit yourself to using the simplest tool - a hacksaw. During the cutting process, the main thing is to ensure, if possible, the integrity and evenness of the edge, as well as to maintain the correctness of the cutting line. In this matter, much will depend on the quality and sharpness of the saw itself. But this option will not work if the question is about how to cut laminate in large quantities. Technically, the hacksaw effectively copes with wood-based materials, which include laminated panels. And with its help, it is quite possible to cope with a whole batch of material, even alone. But the problem is that maintaining more or less decent cut quality throughout the entire process will be very difficult.

Cutting with a grinder

You could say this is the opposite of the previous tool. If you equip your angle grinder with a high-quality cutting wheel, you can get not only a productive, but also a neat assistant. But cutting laminate flooring with a grinder without experience is still not recommended. There is nothing particularly difficult in handling angle grinders, but at least before work you should practice on rough panels. As for the equipment itself, experienced parquet floorers recommend using a wheel with 48 teeth in a 160 mm format. This cutter will allow you to perform serial cutting, which is useful not only as a way to save time, but also from the point of view of maintaining straight edges - at least, the cleanliness of the cut will be ensured in the lamellas placed in the middle of the batch being opened. By the way, to obtain a 100% accurate cut, you can install the same rough elements in place of the outer panels.

Cut with a jigsaw

If with an angle grinder you still have to resort to some tricks to achieve the cleanest result, then in the case of this it is not necessary. Even when working with piece cutting, this tool will achieve impressive results. An example of working with a jigsaw also shows the depth of the question regarding what is used to cut laminate, if you need to get a figured cutting. Of course, execution straight cut is the most common operation. But non-standard installation, which involves installation with curved panels, is also practiced. Another thing is that the implementation of this method can be trusted to professional parquet floorers. The advantage of a jigsaw is precisely that a model suitable for its characteristics, even in the hands of a beginner in such work, can provide a very decent result. To do this, you should initially purchase a multifunctional device, design and saw blade which allows for figured cutting.

Using a circular saw to cut

The advantages of this tool include high cutting speed and the ability to work with several panels at the same time. It has already been noted that the grinder has similar performance, but the circular grinder also has serious features. Its cutting power is much higher, so if you are thinking about the best way to cut laminate from commercial or semi-commercial series, then there is no better way to find this method. Such panels are characterized by high strength, hardness and rigidity. Therefore, even in piece processing, not every jigsaw or hacksaw can cope with this task. will undoubtedly perform batch cutting, but not as quickly and efficiently as

Guillotine cutting for laminate

This method can be called optimal for the average home craftsman who plans to decorate one or more rooms in the house with laminate flooring. The guillotine for lamellas is a special cutter, the design of which is designed not only to directly provide an effective mechanical effect on the material, but also to provide user convenience. To understand this in everyday life, it is first of all worth considering this tool. Unlike a hacksaw, it performs the operation faster and more accurately, and compared to powerful angle grinders and circular machines, it costs much less and requires an order of magnitude less hassle to maintain.

Features of cutting vinyl laminate

If commercial panels are characterized by high strength, then vinyl material, on the contrary, is produced with the expectation of creating an original decorative effect. In addition, vinyl makes cleaning the floor easier, which is why housewives appreciate it. Such lamellas are also convenient for cutting. It's usually relative soft material, which can be cut with hand tools. So, how to cut vinyl laminate? It’s probably not worth using these remedies. It is more advisable to use a stationery knife, which has a high cutting ability, almost like a blade. Soft vinyl panels are sensitive to mechanical stress, so sharp knife will become more good choice than a rough angle grinder or hacksaw.

How to choose the optimal tool?

The choice should be guided by two groups of factors. Firstly, on the characteristics of the material, installation conditions and volumes of work. Secondly, on the parameters of the tool itself. For example, how to cut laminate flooring at home? Arm yourself with productive electrical equipment in in this case there is no point, since a small volume of panels for household installation can be processed efficiently using a guillotine and a hacksaw. If you plan to decorate a huge office area using a wear-resistant laminate model, then a circular saw or grinder would be a good choice.

How to cut laminate correctly?

Even if the right tool was selected for specific tasks, this does not mean that obtaining a high-quality result is a foregone conclusion. Much depends on the cutting technique. First of all, the surface of the lamellas is cleaned of dirt and dust, and the tool is prepared for use. It is especially important to select the appropriate accessories for an angle grinder and a circular saw. The work process itself must be carried out smoothly so that the edge is preserved in proper aesthetic condition. Moreover, each panel must be securely fixed during the cutting process, otherwise there will be a risk of uneven cutting.

Laminate is a popular flooring because it has chic design and long service life. Products of this type consist of a wood base and a special decorative layer. Laminate production technology allows you to give it not only different colour, but also the structure various breeds tree. Laying this material is relatively simple, but almost always requires trimming the boards. Therefore, before you begin installation work, you should definitely find out what you need to use to cut the laminate.

Cutting methods

Installation of a laminate board involves fixing it to the floor using glue or special screws. But many novice craftsmen do not know how to cut laminate in order to get a high-quality and even joint.

Cut vinyl or cork laminate at home you can use several tools:

• Cutter. This design resembles a guillotine. To cut a board, it must be placed under the knife along the cutting line. After this, the cutter is pressed in with a certain force, which produces a cutting sensation. If you have certain skills, you can use this tool to cut laminate even lengthwise.
• Jigsaw. Cutting with this unit is one of the fastest and most affordable. But for laminate processing it is important to use only special saws. To cut the desired piece, you should measure the required dimensions and draw a straight line. After this, the board is moved a little away from the table so that the saw moves in the air and cutting begins.

• Hacksaw. Cutting laminate flooring with its help can be performed both on the floor and at a certain elevation. To do this, you also need to mark the line and carefully start sawing. It is important to take into account the saw's spread here, as it can take up a lot of laminate. This in turn can lead to inconsistency.
• Knife. The top layer of the laminate is thin layer film, which can be easily damaged with a regular stationery knife. The technology for working with this tool is quite simple. You need to draw the edge of a knife along the marked line so as to cut through upper layer. If you need to get a straight line, then the board should be additionally fixed with high quality.

When you have cut through the top layer, you need to break off the extra piece. To do this, place the laminate on the edge of the table along the edge and sharply press on one of the sides. This approach is reminiscent of breaking ceramic tiles or glass after processing with a glass cutter.

• A circular saw. Cutting with this tool is much faster. To cut a piece of laminate, you should also mark it. After this, the board is fixed on the frame along the plane of movement of the saw. Place the product on top with a laminated layer. In this case, the saw blades will enter the material, which will reduce the formation of chips and cracks. When everything is set, you need to slowly guide the board along the cutting line with the circular saw turned on.
• Bulgarian. This tool operates similar to a circular saw. Similar types of cutting discs are also used here. But cutting can already be done almost anywhere. But in order to get an even cut, you need to train the hand that controls the grinder during processing.

Choosing a tool

As you know, universal method cutting laminate does not exist. To do this, many tools are used, which have their own pros and cons. It is impossible to say which option is better as it all depends on the individual situation.

To choose quality tool, several factors should be taken into account:

• Required end quality. If you need minimal amount chips, use a hand cutter or jigsaw. Otherwise, all the cutting methods discussed above will work perfectly. They will allow you to cut the board correctly with minimal effort.
• Type of pain. The most simple option is when you need to cut the laminate crosswise. The length of the cut is relatively short, which minimizes the risk of large curvature. When you need to cut along one of the sides, then in this case it is better to use a milling cutter and a circular saw.

Please note that similar operations can be performed with other tools. It all depends on your capabilities.

• Shape of pain. Almost all mechanisms allow you to cut the board only in a straight line. If you need to get complex shape laminate, then the solution to this problem will be a grinder or a jigsaw.

A circular saw

Circular cutting is one of the most popular options, as it has several advantages:

1. Possibility of using disks with various sizes teeth This allows you to regulate the cutting process and the quality of the resulting surface.
2. The tool runs on electricity, which eliminates the use of fuel.
3. Processing laminate in a circle is not accompanied by significant noise, which makes it possible to process boards even in apartment buildings.
4. High speed. The efficiency of a circular saw is one of the best. Therefore, it is used by many specialists who are involved in laying such materials.

The only drawback of this mechanism is that to obtain high-quality cutting you need to have some practice and experience working with it.

Electric jigsaw

Working with a jigsaw is pleasant and fast. The tool has light weight, which allows you to hold it well while cutting. At the same time, the mechanism produces virtually no dust, which makes it a unique option for private use.

The only drawback of a jigsaw can be an incorrectly selected file. Low-quality products will simply tear the laminate, forming unsightly ends that will have to be further cleaned. To get a quality cut, the jigsaw must operate at maximum speed.

Knives

Hand cutting of laminate is relatively rare. For such purposes, both stationery knives and hacksaws are used.

When using the latter type of tool, it is important that it has very fine teeth.

Several disadvantages of this approach should be highlighted:

1. Cutting process using hand tools take a lot of time. This in turn affects the efficiency of laminate installation.
2. To get a quality cut, you need to act very carefully and slowly. To do this you need to have relatively great experience working with similar materials and tools.
3. It is almost impossible to get a cut without chipping using a hacksaw. Therefore, the cutting area is often additionally cleaned.

Bulgarian

A grinding machine is a universal mechanism that can be used to cut not only wood, but also concrete. To process the laminate, special discs are used, on which teeth are applied, like a circular saw.

Using an angle grinder has several advantages:

1. With its help, you can create both straight and curly cuts.
2. The ends obtained after cutting are of high quality.
3. Operation of the grinder is possible even without preliminary preparation material.

But this tool has several bad sides:

1. The weight of the structure is significant, which does not always allow high-quality control of the cutting process.
2. During operation, the grinder produces a lot of fine dust. This is not always effective in residential areas.
3. When cutting, the ends of the laminate begin to heat up, which leads to the formation of burning, which, together with dust, is very harmful to the human body.

Guillotine

The cutter is perfect for manual cutting. Among the advantages of this tool are noiselessness, ease of operation and high-quality cut. Operating such mechanisms is relatively simple; the main thing is to take precautions, since the knife is very sharp. Cutting with a guillotine does not generate dust, which makes it a professional tool.

The peculiarity of this material is that it is recommended to cut laminate flooring only in the transverse direction.

But if you practice a little, you can process boards lengthwise. The cost of such a tool is quite high, so it is not economically profitable to buy it for a one-time installation of laminate flooring.

Other options

An alternative option for laminate processing is special machines, with the help of which you can obtain a high-quality cut. They are intended only for working with such a substance. Cutting laminate flooring with their help is very simple, as they are equipped with special clamps and several types of knives for different layers. It is almost impossible to find them in everyday life, since the structures are very expensive.

In appearance, laminate resembles natural wood, although high-strength fiberboard with decorative finishing is used for its production.

Important! In the production of laminate, four-layer technology is used; on the top there is a protective film that protects it from mechanical damage and wear.

Laying laminate flooring is quite simple, like any other floor covering, it requires sawing and preparation for installation. If you are new to this business, then you may have problems choosing the right tool. To learn about laminate sawing technology when using special tool without chips or scratches, please read the information below.

Laminate classification

Jigsaw for cutting

An electric jigsaw is often used to cut laminate flooring; it is a popular and universal tool, which requires certain skills to work with. The laminate board will not deform if operated at high rotation speeds. Therefore, for high-quality cutting of laminate, you should choose a jigsaw where you can adjust the speed, most often this is done using a button. To properly cut laminate using electric jigsaw, it is necessary to carry out preparatory measures:

• On the outside of the laminate board, using a pencil or marker, a mark is made along which the cut will be made;
• It is necessary to draw along the same line with a knife or other sharp object and apply some force;
• The laminate board should be laid on flat surface and keep it stationary.

The mark is made with a knife or other sharp object so that the jigsaw does not damage the coating, and the cut is smooth and correct in accordance with the applied markings. Before sawing, the laminate board is placed in such a state that the edge that needs to be cut is suspended. Next, sawing is carried out along the intended line. You need to choose the right saw for sawing with an electric jigsaw; in a special store you can find saws for working with wood and special attachments designed for sawing laminate boards.

If straight cutting is required, you can use a wide nozzle. For more complex sawing, it is better to use a fine-toothed attachment. The blade of such a nozzle should be narrow, this will avoid cracks and chips in the process of sawing the laminate board.

The beauty of curly cuts is achieved when using a narrow nozzle with small teeth, while when using a wide nozzle it will be difficult to carry out turning movements and the figures may be cut out not according to the markings, but with some deviation. Pay attention to the availability of saws with reverse teeth in a specialized store; they are just suitable for accurately and quickly sawing laminate boards.

Circular saw for cutting laminate boards

A circular saw can be used to cut laminate boards, although it is not the optimal tool for this operation. If you have not previously worked with circular saw, then it is better to abandon the idea of ​​sawing laminate boards when using this tool. Most often, a circular saw is used to cut laminate boards lengthwise.

If you need to cut a saw along the entire length of a laminate board, then this tool comes in handy. However, when working with a circular saw when cutting laminate, you may encounter a problem unpleasant odor, this occurs due to the high speed of rotation of the disk, which, when heated, begins to burn out the wood. To properly cut laminate boards using a circular saw, you should use a disk with fine teeth.

Grinder for performing laminate sawing operations

If you have a grinder at hand, then it is also quite suitable for cutting laminate boards. You just need to choose a disc designed for working with ceramics or concrete. Using a grinder, the laminate is cut according to outside, this method allows you to avoid the appearance of chips and cracks. You should pay attention to the fact that when working with an angle grinder, a lot of fumes and dust are released; you can protect objects in the house with the help of film.

Hacksaw for cutting laminate

A hacksaw is not a leader in the ranking of tools for cutting laminate boards. But if this is the only tool at hand, certain rules will help you cope with the sawing task. Do not use a hacksaw with large teeth; it will damage the surface and will not allow you to make an accurate cut. It is recommended to use a hacksaw with fine teeth and first mark with a pencil and a sharp object along the cut line. But when working with a regular hacksaw, you don’t have to count on high speed. A hacksaw is best suited for making small cuts and cross cuts. This tool is not suitable for cutting along the entire length of a laminate board.

Cutter for cutting

The cutter is used quite often in laminate sawing, since guillotines operate on the principle of a burner, as a result, it is possible to create a cut faster. When using this tool, the cut is smooth. It is convenient to work with such a tool because it does not generate dust and does not make noise. The cutter is designed in such a way that it is only suitable for cross cuts, so the scope of this tool is limited.

Laminated board- This is the most popular floor covering today, obtained by pressing wood-fiber board (Fiberboard). How the surface of such a finishing detail will look depends on the special decorative layer.

More often it repeats the pattern of wood, but sometimes it has a more complex pattern. The internal structure of the board includes 4 layers that are “laminated” on the outside protective film, which gave the name to the material itself.

Helpful information! Thanks to its carefully thought-out design, the material is extremely easy to use, making it accessible to craftsmen of all levels, from those with many years of experience to beginners.

The peculiarity of working with laminate is, among other things, that it is cut directly on site before installation. The question becomes quite reasonable: How to get an even cut and not spoil the part?

A little about the laminate structure

The experience of thousands of renovations shows that it is not possible to lay the floor in a room with solid laminate parts. Sooner or later there comes a time when it becomes necessary to adjust their size.

Instead of using trial and error to send a couple to a landfill square meters enough expensive material, it is advisable to immediately decide on the choice of devices to obtain a neat cut.

Presenting the internal structure of a laminated board will only help you approach such a crucial moment with knowledge.

• A layer of moisture-resistant paper is located on the bottom surface of the product and its purpose is already clear from the name. Some types of laminate are additionally equipped with an applied backing that insulates against cold and noise, which significantly affects the price.
• The main layer by volume consists of compacted fiberboard. The value of this density determines the quality of the connection between the panels.
• Next is a layer of paper with an image printed on it, repeating either patterns natural materials, or geometric fantasies of the designer.
• Due to the lack of color in the top layer, consisting of acrylic resin, the characteristic pattern is fully visible. But the level of stability of the laminate and the length of its service life depend only on the thickness of this invisible layer.
• According to the level of security, laminate is divided into two directions. Household level characterized by moderate cost and average wear protection. Commercial models are more expensive, but can withstand much longer and more intense loads.

Sawing accessories

Almost every material has a specific group of processing tools. It’s hard to imagine the result of the idea of ​​cutting ceramic ceramic with a jigsaw. floor tiles, and with a stationery knife - metal tiles. Dearest diamond glass cutter will be useless when cutting a regular sheet of paper.

Anyone who has encountered a similar problem understands that to cut a laminate board you need to use a special tool that preserves internal organization material.

Such tools include:

• Electric jigsaw;
• Circular Saw;
• Hand saw;
• Laminate cutter.

Electric jigsaw

Which tool to choose for cutting laminate? One of the most best results gives the use of an electric jigsaw. When cutting laminate, the saw for this device is selected specially for working with wood.

Note to the master! To make a high-quality and even cut on the front surface of the board, you need to mark the cut line with a pencil, and then use a stationery knife to cut the top layer.

The part prepared for cutting is placed on a flat, stable base with the backing facing up and fixed.

Movements during cutting must be smooth and uniform, otherwise chipping and damage to the structure of the workpiece may occur. A high-quality cut is obtained regardless of the direction of movement of the tool.

Saw

To obtain a clear cut of the laminate board, it is possible to use a manual electric saw with a disc for metal, simpler, “grinders”. In the same way, the workpiece is placed on a flat base and secured. The saw blade is carefully drawn along the pre-marked line.

In cases where it is not possible to use the two previous tools, a hand saw or a hacksaw can serve as a replacement. When working with such a device, extreme care should be taken.

Important! Despite the length and complexity of this method, it is not always possible to achieve good quality cut. It is advisable to use this method only in isolated cases.

Cutter

When you are working on a large amount of laminate, you can use a specialized cutter made in the form of a sharpened blade. Through the handle, the force from the hand is transmitted to the cutting edge.

The cutter can only make cross cuts, but in return we get exceptional precision. Looking at the cost of this tool, we conclude that it is only used experienced craftsmen who have quite a lot of orders.

Which saw should I use to cut laminate?

After choosing a tool, you need to correctly select components for it. There are many varieties of files for electric jigsaws only for laminate.

How clean the cuts are made depends on appearance finished coating. Attempts to cut laminate flooring with the first saw that comes to hand can end in a very unfavorable result.

If finding a special file for an electric jigsaw on laminate is problematic, you can use another file that has a minimum blade width and fine teeth. A narrow blade will help make the curly cut clean and precise.

For a greater likelihood of obtaining a high-quality cut, you should choose a wood file that has the opposite direction of the tooth tips. The correct speed of the blade and the quality of the metal play an important role in the quality of cutting.

Owners of a circular saw will also be able to use their unit for cutting laminate flooring.

The main features of using a circular saw for laminate processing are as follows:

• The decisive parameter is the size of the teeth on the discs. The smaller they are, the cleaner the cut will be;
• It is better to mark the cutting line along the front side of the board;
• The part is fastened to the machine with the pattern facing down;
• The workpiece moves towards the disk, and it must be held securely;
• Special attention safety precautions should be taken into account. When working at the machine, clothing and long hair must be carefully filled, the disk is equipped protective casing.
• One of the disadvantages of the method of cutting laminated boards on a machine is the inability to perform curved operations. A jigsaw can handle such parts better.
• Placing the workpiece face down on the machine is because rotating the blade from bottom to top can cause jagged edges on the surface.

Conclusion

In conclusion, let's briefly look at professional instrument. Specialized machine for working with laminate allows for cutting in a short time large quantity material.

For those who do styling floor coverings professional and constant, it is difficult to find more necessary tool. For greater clarity of the processes considered, a photo report and video are provided to illustrate this topic.

Laminate floors are perhaps at the peak of popularity today. Laying laminated material can be done on your own. For this you need: desire, accuracy and a little free time. To perform installation, you need to purchase materials and a set of tools. Here the question arises: what tool is needed for installation and how to cut laminate flooring at home.

Sometimes it is difficult to choose just one type of lamellas, there is such a huge variety of colors, textures, decors with various patterns, reliable imitations: natural wood, natural stone, metal and even reptile skin. As practice shows, diversity appearance lamellas are not a factor influencing the cutting of the material. Therefore, in most cases, cutting yourself will not cause any difficulties.

Everything can be produced installation work without purchasing specialized tools, using the existing stock of equipment in the home pantry. Today we will look at what tools are needed for cutting panels and how to cut laminate when installing it yourself.

The laminated panel should be cut in such a way that there are no torn marks or damage left at the cut site, so that the cutting line is smooth and straight. To perform the task, tools specially designed for this purpose are used, which we will look at, and also talk about how this is done.

A few tips to help you make a quality cut:

• laminated boards can be cut well even using the well-known hand hacksaw, but it will take longer, and you have to try to make the cut clear and without burrs;
• so that the edge of the panel after trimming is free of frays, cracks and chips, you can use any saw, but it must have fine teeth;
• if the cut is of poor quality - if there are cracks or chips at the end, such a lamella will need to be hidden with the bad side under the baseboard so that the defect is not noticeable;
• do not rush into pruning, you must first do accurate measurements, draw the direction of the cut on the board and check again that everything is done correctly;
• to achieve a good cut on the front side of the panel, when cutting, place it horizontally on a support, front surface up;
• When cutting, do not use too much force so as not to break off the edge of the board.

A hacksaw is used to cut laminated panels in the absence of electrical power. precision instruments with a small amount of work. Here you need to try to get an even and high-quality cut without damaging the edge or deviating from the intended course. What kind of saw can you cut laminate flooring with? Cutting can be done with any saw that satisfies the quality of sharpening.

But this tool is not one of those that is best for sawing laminate flooring when there is a large amount of work. Technically, a hacksaw can handle big amount panels, but it is not so easy to achieve normal cut quality throughout the entire work.

Let’s say right away that this is the most optimal and fastest way to trim lamellas, after all manual method quite labor-intensive and inaccurate. If you intend to continue to perform any kind of renovation work around the house, it's worth having an electric jigsaw in your arsenal.

Using this electrical device, it is easy to make a cut along or across the slats, at any angle. There are devices that will allow you to make cuts located at the same distance from the edge of the board, even without marking.

Even with a single cut, such a tool shows excellent result. The answer to the question of what is better to cut laminate with a shaped cut line becomes clear: with a jigsaw. This tool helps you achieve the rounded cuts needed when meeting with heating pipes. To do this, you just need to select the right file with fine teeth, which will improve the quality of the cut.

Of course, this tool also performs straight cuts efficiently. The advantage of an electric jigsaw is that even a novice builder can achieve excellent results with it.

The disadvantages of the device include

• noise during operation;
• a lot of dust is generated.

Note that other power tools also have these disadvantages.
How to properly cut laminate flooring with a jigsaw:

1. The tool is equipped with a file with a fine reverse tooth. If one is not included with the jigsaw, you will need to purchase one. This is the answer to the question of which jigsaw file should you use to cut laminate flooring.
2. Markings are applied to the panel that requires trimming. The cutting line is drawn on back side panels.
3. The board is laid on a solid base with the decorative surface up, after which trimming begins along the intended line.

How to cut laminate flooring with a circular saw

Not everyone will buy such a tool, but those who have it will enjoy working with it.

Advantages of the device:

• high speed;
• It is possible to work with several lamellas at once.

The power of the cutting device is much higher than that of other power tools. Therefore, if you are choosing the best way to cut durable and hard commercial-grade laminate, then you should choose a circular saw.

The sequence of actions when working with a circular saw for cutting laminated boards:

• select a disc for the circular device with small teeth;
• on decorative surface mark the boards for cutting;
• the boards are placed upward decorative layer One by one, one after another onto the machine, holding the panel by the edge, slowly direct it forward towards the rotating disk.

Extreme caution must be used when operating a circular saw as it may cause injury to your hands.

Is it possible to cut laminate flooring with a grinder?

Yes, you can, but you shouldn’t work with an angle grinder without experience. First, you still need to learn from unnecessary boards.

There are different discs for the device: for working with wood, for metal, etc. When cutting laminate with a grinder, experts advise using a metal disc that has small and thin teeth, this will help avoid the formation of cracks on the board.

There are discs specifically for working with laminate; you can purchase them in construction stores. Its format is 160 mm, has 48 teeth.
Before cutting, the lamella is placed on a solid base with the pattern facing upward and fixed. The saw should be lowered smoothly and slowly to avoid damage to the panel.

Guillotine for laminated boards

This is a new special small machine designed to mechanically act the blade on the laminated material by pressing the handle of the device. The machine is easy to use and does not require enormous user effort.

If you are asking the question of how to cut laminate flooring at home, then you should consider this tool. Compared to a hacksaw, it works much faster and better, and if compared to an electric grinder and circular saw, it is much cheaper and easier to maintain. The machine does not require a source of electricity. The tool does not generate dust, sawdust, does not allow chips on the panels and works without noise.

This best option For home handyman, who set himself the task of decorating all the floors in the apartment with laminated parquet.
This laminate cutting tool should be used as follows:

1. a lamella is placed on the base of the cutting device - horizontally;
2. a line of markings applied to the board is placed directly under the cutter;
3. the handle goes down to the laminated board, resulting in a neat and clear cut made by the cutter.

This device is capable of cutting a large number of panels quite quickly and efficiently. Practical and useful tool, which is worth purchasing for professional installation of laminate flooring.

What is the best way to cut vinyl laminate when installing?

Vinyl or PVC laminate is gaining popularity due to its remarkable qualities: water resistance, wear resistance, ease of installation, variety of decor. This material easy to care for and not at all afraid of water. Most often these are flexible panels similar to linoleum.

How can you cut vinyl laminate at home? There is no need to use the previously listed tools here. Vinyl tiles easy to cut with a stationery knife, that's it good decision for them.

How to choose the right tool

Here it is worth taking into account two determining circumstances:

• properties of panels, scope of work;
• technical characteristics of the tool.

For example, what should you use to cut laminate flooring at home? There is no point in purchasing expensive, powerful electrical equipment; this amount of laminated board will perfectly help you cut a machine called: guillotine. When finishing with commercial laminate flooring large area In the office, it makes sense to choose a circular saw.

Sometimes it becomes necessary to increase the technological gap left by the wall undersized by mistake. How then to trim the laminate against the wall to increase the size of the gap? An example of using a jigsaw to solve this problem is given in the video:

Whatever tool you choose, not everything depends on it. You must act carefully, slowly, carefully taking measurements and applying marking lines for trimming. You should not apply too much force to the board while cutting, so as not to break off the edge.
We wish you good luck!