Frameless wall decoration with MDF panels. Do-it-yourself wall covering with MDF panels: advantages of finishing. How to attach to the sheathing

Beautiful and smooth walls are the key to an effective renovation. In modern decoration there are a great variety of types and methods of finishing. And MDF panels are one of them. When choosing finishing material for decorating walls, the question of cost-effectiveness, ease of installation and ease of operation always arises.

Along with paints, plastic, wallpaper and other materials, wall covering with MDF panels is also worthy of attention. I will talk about this relatively new finishing method in this article.

Probably many of you have encountered the fact that when updating the interior of an apartment, you really don’t want to bother with long preparation walls, cleaning large quantity construction waste, and especially spending a lot of money on repairs. When there is no opportunity or desire to bother with painting or wallpapering, you can get by with wall coverings. This method allows you to level and decorate the surface in one fell swoop.

The wall is beautifully covered with many different materials. And this is not only drywall or plastic, but also MDF panels. Working with them is excellent in terms of speed and relative ease of installation. They look much richer than plastic ones, are more convenient in size and are just as easy to use in the future.

MDF panel is a board of pressed wood fibers impregnated with binding materials. Such a slab may not be covered with anything on top, or it may be covered with a layer of special film and thin layer plastic. This is a very environmentally friendly material that has all the properties necessary for creating structures. The panel can be washed, it is quite durable and safe.

As for color and appearance, I want to say that today manufacturers offer quite wide choose colors that imitate different kinds wood, as well as bright and pastel monochrome options. So covering walls with MDF panels can easily cope with any problem. design solutions. The size and shape of the panel can also be different.

It can be square slabs from 300 x 300 mm to 980 x 980 mm. There are slatted panels up to 300 mm wide and 3 m long. Such panels are very similar to lining and look good on the wall and ceiling. If you need to sew it up right away large area or use custom size, then sheets measuring mainly 1220×2440 mm will help out.

All options are generally up to 25 mm in thickness. This helps a lot to solve the problem with sound insulation. Therefore, MDF is definitely worth paying attention to when choosing materials for cladding.

The only disadvantage of this material is its relatively low moisture resistance. Therefore, they are suitable for finishing not all rooms. A chipboard panel is used only in dry rooms, such as a hallway, and a fiberboard panel is used in rooms with moderate humidity, such as a kitchen.

Sheathing - instructions step by step

I will tell you in detail how to cover walls with MDF panels. The process of installing wall panels is quite simple and does not imply complex training walls. They can be attached to a prepared frame, at the same time leveling the wall, or you can use glue when the wall does not require additional transformations.

In any case, no matter what method you choose, you need to take into account several nuances. Before starting work, the panel must undergo some acclimatization. To do this, it is enough to hold it in the room being repaired so that a balance of temperature and humidity is established between the panel itself and the air. MDF is returning to normal and some expansion is taking place.

Before installation, the wall, as already mentioned, does not require special preparation. It is enough to clean areas with obvious waste old paint or plaster to get rid of cracks.

When installing panels, you must remember their physical properties and leave small gaps at the bottom and top. A few millimeters are enough. This is necessary to take into account their normal expansion with changes in temperature and humidity in the room. Otherwise, over time the panel may warp or warp.

On the frame

When choosing frame installation, you will need profiles or wooden slats. When choosing fastening materials, you should pay attention to the complexity of the wall itself. You may need to navigate around many corners or ledges.

In this case it is better to use mounting profiles(various additional elements), since their wide variety will allow you to do the work as carefully as possible, especially in the case of corners. However, if for some reason you decide to do without additional elements, this is also not a problem. All joints and corners can then be closed using a universal corner.

This applies not only to the frame, but also glue method installation So, you need to install two skirting profiles (also called moldings) running perpendicular to the facing slab. This means that if the panel is mounted vertically, then the profiles are placed horizontally (near the floor and ceiling).

In horizontal direction mdf boards, profiles are set to vertical position at the corners of the wall. In the case of fastening sheet panels large area, this question is not so fundamental. After installing the first profile, using a plumb line or building level determine the position of the second extreme profile. Next, using the same plumb line or level, secure several more intermediate profiles at a distance of approximately 500-600 mm.

If sudden changes in the surface do not allow you to attach the profile to a level, then you can place it under it various materials. These can be wooden slats, fiberboard, plywood.

Intermediate profiles are necessary to ensure that the future panel does not bend under hand pressure. Therefore, adjust their number based on the area and evenness of the surface to be sewn and the thickness of the panel itself. The panel is pre-cut to size, taking into account the required gaps. If the cladding is made using slatted panels with a groove and a tail, then a J-profile is usually used as a molding, into which the first panel is inserted.

The tail is trimmed and inserted into the profile on three sides - one side and two ends. The side with the groove remains free. It must be attached to the sheathing or directly to the wall. The next panel is driven into the groove with its tail, and the side with the groove is also screwed to the sheathing. This is how all the panels are assembled.

The latter is trimmed around the edges by about 5 mm and first driven into the second molding. After the stop, it is enough to move it a little in reverse side before entering the previous groove. When using other types of panels, they are attached joint to joint.

It is very important to trim the edges evenly so that the joints are even. It is better to trim thick panels using a hacksaw or jigsaw. The panels can be fastened to the sheathing using ordinary self-tapping screws or using special clips and clamps.

The latter option is especially progressive and convenient, since in this case the panel does not have holes and is simply fastened to the sheathing. Also, this method does not interfere with the elongation of the panel under the influence of moisture and temperature, and, if necessary, can be easily dismantled. At this point the paneling is finished and your wall looks even, smooth and beautiful.

On glue

The adhesive method of fastening allows you to do without installing the sheathing. The preparation of the wall remains the same. Even if the wall was painted oil paint, it is not necessary to delete it. Modern adhesive mixtures penetrate quite deeply and allow you to do without this process.

The panels can also be glued to the sheathing. This option is relevant when the wall is very uneven and to access required level additional slats have to be installed. MDF glue is applied over the entire surface of the panel in the form of zigzag stripes.

We decorate the walls with MDF panels

We decorate the walls with MDF panels

This information is intended for those who want to quickly and cheaply decorate MDF walls on their own, or for those who simply want to broaden their horizons. By studying this article, you will understand that finishing it yourself is not very difficult. After all, the installation is alternately painted and shown in the form of photographs.

MDF material is wood waste (shavings) mixed with a special glue solution and having been under pressure.

This structure of the material makes it similar to chipboards. but at the same time significantly different. For example, high processing temperature wood waste in production particle board, avoids adding to the bonding mixture various resins and other negative chemical compounds.

Despite this, they have excellent technical performance, as a result of which they are widely in demand today.

Let's take a closer look

Interestingly, this material is used for finishing work on all surfaces, from ceiling to floor installation ceiling panels. On the other side, this type materials are much more common in various administrative premises And in public places. Perhaps people do not use it for their home due to the lack of home warmth and comfort of this material.

Installation of MDF panels

Three years ago we bought our first apartment. It was almost completely finished, only the walls in the room and kitchen were simply puttied. We decided to cover them with wallpaper, and in the kitchen, in the work area and around dining table, decorate the walls with panels.

We liked the store sheet panels MDF made to look like ceramic tiles. There was a large selection of colors. The seller said that MDF panels can be attached directly to glue with liquid nails, if the walls are smooth, wallpaper for Leroy walls. Ours were pretty even.

MDF panels are made from pressed wood chips, which are impregnated with special compounds and covered with a paper-based film on top. MDF panels seemed to us more environmentally friendly than PVC. However, they are made from natural material, A modern technologies avoid the use of harmful resins and phenols in production. The size of the panels was approximately 1.5 m by 1.8 m. I don’t remember exactly now.

The disadvantages of MDF panels are that they are not fire-resistant and not very moisture-resistant (we personally verified the latter) installation of PVC panels. I recently read that MDF sheet panels need to be attached to the sheathing. But then we followed the seller’s advice and glued the panels using liquid nails.

Our MDF panels did not go all the way to the ceiling, but to the level of the kitchen cabinets. Therefore, we simply placed a sheet of MDF panel vertically and glued it entirely. We first drew a level top line along which the panel was supposed to go. It was just the right height. The panel was glued horizontally near the dining table - this can be seen in the photograph.

But cutting the panel became a problem for us. In general they use it for this electric jigsaw. We didn't have one. My husband tried sawing the panel with a regular saw and cutting it with a knife. In the end, he got angry and simply broke off a piece. Our MDF panels were used as tiles to renovate the toilet plastic panels video. And just along the seam the panel broke. Only a crack went to the side, which was to be expected. But this crack turned out to be behind our locker. So we covered it with paint and forgot about it. To mask the panel joints and edges, we used white PVC corners and PVC profiles. They were also glued with glue.

As a result, we were pleased with the appearance of the kitchen. It only took a few hours to install the panels; most of the time we spent cutting the panels. The MDF panels held up well. In any case, they did not fall off in two years, although in that apartment it was very high humidity air how to cover walls with MDF panels video. Externally, the panels looked like tiles. We knew that this was not tile. But friends came to visit us, whose attention we did not focus on the repairs. Then in the conversation it became clear: they were sure that our kitchen was tiled. In the Foto general form kitchen covered with MDF sheet panels.

I didn’t like the following about the sheet panels: the pattern on them was erased when washing, installing the wall panels with glue. Rub it a little harder with a sponge and the paint will peel off. They also get wet when they come into contact with water, and quite a lot. That is, they definitely cannot be used to decorate a bathtub. However, the price of the panels was about 600 rubles per sheet; it took us three sheets. Agree, for such a price it is difficult to find the ideal material.

Today the simplest and in a fast way To make the walls of your home beautiful and smooth, decorate them with MDF panels. This solution is, of course, not suitable for all rooms, but for corridors, stairwells, storage rooms and hallways, this material will be almost ideal. We will talk about it in this article, in which, together with the site, we will look at how it is done MDF installation frame panels and frameless way with your own hands.

There are two ways to fix MDF panels on the walls - the so-called adhesive and frame. Both of these methods are good and are used depending on the circumstances. If finishing walls with MDF panels involves hiding any communications, then frame method MDF fastenings. If we're talking about about finishing smooth walls, then the glue method is used.

Wall decoration with MDF panels photo

Installation of MDF panels: frame installation method

The very name of this method speaks for itself - to implement it you will need to build a frame, which in some way resembles the structure that is used for. The difference lies only in the position of the load-bearing ones - if they are installed vertically to fasten plasterboard sheets, then MDF provides for a horizontal arrangement of profiles. In this regard, the peculiarities of constructing such a frame arise.

In principle, at the first stage everything happens in a similar way - the plane of the future frame is hammered out, then guide profiles are attached along the perimeter of the wall, on the floor, ceiling and adjacent walls. This is where the differences begin. IN given plane vertical load-bearing profiles cd are installed not every 600mm, but every 3000mm, which is standard length bearing profile.

Installation of MDF panels: frame method

This is done in order to subsequently install horizontal load-bearing profiles cd between them, the pitch of which is 500 mm. They are connected to vertical profiles using crab CD connectors, and are fixed to the wall with the same U-shaped brackets.

Installation of the frame is the main work in the process MDF installations panels. The mount itself is more easy process, which almost everyone can handle. MDF panels are attached to the frame using clamps (special clamps). Before fastening it to the frame, the clamp itself is inserted into a groove located at the end of the panel, thus ensuring their reliable fixation to the frame. The clamps are designed so that they do not interfere with inserting the next panel into the groove.

DIY installation of MDF panels photo

Installing panels with glue yourself: installation features

Installing MDF panels on walls using glue is much simpler - the entire installation process is greatly simplified by the absence of a metal or wooden frame, the construction of which takes quite a lot of time.

Installation of MDF wall panels photo

Before we begin directly attaching the panels, let’s first look at the glue that is used for these purposes. Or any glue will not work here - you need a composition that has certain qualities.

• Firstly, the glue must be plastic even after hardening - the fact is that MDF panels made from pressed cardboard are highly susceptible to deformation depending on the temperature and humidity in the room. Therefore, an adhesive is needed that can dampen these same temperature expansions.
• Secondly, the adhesive used for MDF panels should facilitate their fastening even in places where the walls are slightly curved. That is, the texture of the glue should make it possible to spread it both thin and thick - in a word, it should be thick enough. These requirements perfectly fit the so-called “”, which are successfully used by almost all craftsmen to solve the problem of how to install MDF panels.

Liquid nails for mounting MDF panels photo

The installation of panels using glue itself looks quite simple - its technology is almost completely described on a tube of “Liquid Nails” glue. It is not recommended to violate it. To begin with, the walls covered with panels must be cleaned of dust and dirt - in principle, if you are going to seriously engage in self-repair, then the priming process, which is performed to clean the walls from dust and dirt, and at the same time to improve the adhesion of materials, should become a habit. They always prime everything, everywhere.

Priming walls before installing MDF panels photo

After the primer has dried, the actual gluing of the panels begins. While it dries, you can do other preparations - for example, cutting several dozen panels to size.

The glue is applied directly to the panel itself in a dotted manner and in a checkerboard pattern - the glue drops should be large. Once the adhesive has been applied, the panel is pressed against the wall, tapped tightly and torn off. This is required by the gluing technology - you need to tear off the panel so that the glue is weathered and the panel does not peel off from the wall under its own weight. To speed up the process and make installing MDF panels with your own hands faster, you can immediately, one after another, smear up to a dozen panels, attach them to the wall and tear them off. While the glue is weathering, you are allowed to take a smoke break - after five minutes, the panels can be hung on the wall again and thoroughly slammed down.

How to glue MDF panels to the wall photo

It is easy to glue the panels; it is much more difficult to trim them evenly and accurately. In this regard Special attention it is necessary to pay attention to slopes and similar obstacles that come across the installation path of MDF panels. It should be understood that the appearance of the room completely depends on the even trimming of the panels.

Installation of MDF panels on walls

Well, in conclusion, we will dwell on the main installation nuances that are typical for both methods of fastening MDF panels.

• First, there are the angles. It should be understood that it will not be possible to bend MDF panels, so they are simply cut as close to the corner as possible, after which the cut edges are safely overlapped with a special corner, which can be used for both external and internal corners.
• Secondly, this is the frame - the lowest horizontal profile should lie on the floor. In this way you will ensure reliable fastening skirting boards.
• Thirdly, in order to avoid misalignment in the future, the first panel must be installed in accordance with the vertical level and firmly fixed with self-tapping screws in places where they will subsequently overlap (at the bottom with a plinth, at the top with a ceiling, in the corner with a decorative overlay). It is advisable to check the position of the panels with a level in the future - you don’t need to check everything in a row, but you need to apply it to every fifth panel.

That's basically it. This is how MDF panels are installed. This process is neither complicated nor simple, like, in general, any finishing work, in which your attitude to the little things plays an important role, which together affect the overall picture of the repair. Simply put, there are no trifles in this matter.

Wall or ceiling cladding different rooms, including loggias, is often performed using MDF panels. This material does not require a large number of components; its installation technology is quite simple. The range is represented by different types of panels, which differ in size, shade and texture.

More details about MDF material

To make a final decision for yourself which wall covering is best for DIY installation under certain conditions, you need to study information about the material: structure, properties, scope of application.

Dimensions, characteristics

MDF is a material that is made from carefully crushed wood (sawdust, shavings and other woodworking waste). Wood dust is exposed to high temperatures and pressed. Bonding agent in in this case paraffin and lignin appear.

Surface cladding is carried out with sheets and panels of different sizes: length varies from 900 to 3660 mm; width from 150 to 2070 mm; thickness from 1.8 to 60 mm. Most formats are non-standard, which allows you to choose the right option.

The standard length dimensions are 2.6 m. Less common material is 2.4 m long, as well as 2.7 m. The value of the width parameter varies greatly: from 0.15 to 2.07 m.

Main characteristics:

• Environmental friendliness;
• Excellent strength properties;
• Long-term operation;
• High-quality panel surface;
• Soundproofing properties.

Where is it used?

MDF is used in construction (cladding walls, ceilings, doors), furniture production, automotive industry. For installation on loggias, a material is required that is resistant to temperature changes, humidity and ultraviolet radiation. MDF satisfies these criteria, especially moisture-resistant sheet panels.

Preparing for work

Cladding the surfaces of the walls and ceiling of the loggia is carried out in several stages, the first of which is the preparation of the material. The sheet panels are transferred to the balcony so that they acquire the desired level of humidity. This will avoid deformation of the MDF.

Tool

• Hammer;
• Screwdriver;
• Roulette
• Hacksaw for woodworking, metal scissors;
• Level.

Consumables you will need are wood screws, clamps and galvanized corners. And, polyurethane foam, sealant.

Auxiliary materials

Balcony finishing with MDF panels is carried out using components and materials:

• Any insulation from a number of existing ones (mineral wool, penofol, penoplex, etc.);
• Fasteners (nails, screws, clamps);
• Primers for different materials(concrete, wood);
• Accessories for MDF;
• Wooden beams or special profiles for gypsum boards for lathing.

Room measurements and MDF calculation

Finishing walls and flows with your own hands requires taking accurate measurements of the room. First of all, you need to determine the length and height of the walls. The number of panels can be determined by drawing up a diagram of their best location on the wall.

In this case, you need to form a pattern, and there should be as few seams as possible. The number of bars/profiles for the sheathing is determined based on the dimensions of the wall and a sketch that takes into account the distance between the guides (50 cm). The dimensions of the bars are selected taking into account surface unevenness (25x40 mm, 40x40 mm, 30-50 mm).

Step-by-step panel installation technology

Lathing allows you to create more robust construction. The advantage of this solution is that there is no need to specially level the surface of the walls. But the crumbling base (concrete, plaster) must be treated special composition which will strengthen it. For wood, other means are used - antiseptics.

Step 1: Selecting the type of frame and its installation

There are two types of lathing: from wooden planks And metal profile for gypsum boards. The first option will be cheaper, but it is susceptible to exposure to a humid environment. For this reason, it is better to install such a frame on a loggia that is well insulated. Metal analogue stronger and withstands any operating conditions.

The distance between the two slats should be 40-50 centimeters. The bottom rail is attached at a distance of approximately 3-5cm from the floor.

Procedure for installing the sheathing:

1. The highest point of unevenness is determined, this is where the first plank needs to be attached;
2. On the remaining surface of the wall you will have to lay edged material;
3. If the wall is flat, the installation of horizontal guides is carried out from below, after which the top bar is installed, and then the crossbars;
4. The distance from the floor and ceiling is 3-5 cm.

The wooden frame is fastened using dowel-nails and self-tapping screws. For metal, anchors and metal screws are used.

Step 2: Installation of thermal insulation

Insulation is laid between the sheathing strips. Its thickness must correspond to the height of the frame, otherwise the sheet panels will be deformed. For installation between the sheathing guides, almost any insulation is used: mineral wool, penoplex, foam plastic.

The insulation should be located over the entire surface of the wall, including under the sheathing belts. Otherwise, heat loss on the balcony can be up to 40%.

The insulation is simply placed in the cells of the frame. If sheet panels are glued to the surface of the walls, thermal insulation with increased strength is used.

Step 3: Attaching the MDF

Finishing the balcony with MDF panels is carried out using different types of fasteners: screws, clamps, installation with glue. If an adhesive composition is used, it is recommended to use moisture-resistant materials, which are also universal and suitable for attaching the material to different types of surfaces (concrete, plaster).

Detailed step-by-step instruction

The sequence of actions is as follows:

1. Alignment of loggia walls;
2. Thorough cleaning and degreasing;
3. Primer;
4. Applying glue.

For attaching MDF to wooden frame wood screws are used. They are installed at a distance of 10-15 mm from the edge of the panel. This will allow you to hide the screw heads under the corners and baseboards.

Step 4: Connection and fastening to clamps

On the tenon side, MDF is secured with self-tapping screws. If the panel rests on the corner of the wall, the connecting element must be cut off. The next panel is attached not only by snapping into the groove, but also by using glue. The connecting element is glued. The clamps also securely fix the sheet panels.

A clamp is attached to the side of the MDF panel where the groove is located. Next, it is fixed with self-tapping screws on the rail.

When moving to another wall, the material is cut at 45 degrees (from the groove side), the next panel is cut at 45 degrees from the tenon side. Last panel the end is rounded.

Slope finishing

MDF can be installed along and across the slope. The preferred option is determined by its width. For a narrow slope, it is better to choose a transverse installation of the material. For the purpose of finishing corner areas and cracks, special corners, profiles, and plinths have been created. With their help you can hide any leaks. The components are cut and installed using adhesive.

So the finishing MDF ceiling panels or other surface (walls, slopes, parapet) is made different ways: with glue, with self-tapping screws, nails and with lathing. The first option is the least reliable and requires maximum effort: leveling the walls of the loggia, cleaning, degreasing, priming

How to cladding internal surfaces premises using modern Wall panels MDF to achieve effective stylish design shown on photo, we will consider in this article.

Material for MDF panels

IN residential buildings and apartments, their use was limited to the decoration of hallways and loggias. The design of MDF panels was not very diverse and therefore this material was considered budget option official discreet style.

Budget option for a room

Now MDF products are used for wall cladding, which are sometimes difficult to attribute to this material. They differ not only in their quality, but also in their varied appearance.

Light-colored panels

But let's first look at what these products actually represent. MDF wall panels are a decorative finishing coating of wood origin, made from waste wood, crushed to a dust fraction, with the addition of organic binding elements.

That is why the abbreviation MDF stands for “fine fraction”. During the manufacturing process, raw materials are subjected not only to pressure, but also to high temperatures, as a result of which the processed product in the form of panels is obtained with a dense, homogeneous structure.

Such products are even superior to natural wood in terms of the possibilities for further processing during installation and are not inferior to it in terms of technological and environmental requirements. Installation of the panels is carried out either by fixing them to a frame made of wood or galvanized profile, or by gluing them to the wall surface with “liquid nails”.

TOP 8 types of MDF wall panels

According to their shape, the panels are:

1 In the form of slats(narrow panels) having a groove connection: groove - tongue. They are easy to install independently and are widely used for cladding.

Narrow panels with a groove connection

2 In the form of sheets of various sizes. The sufficient area of ​​the sheet allows you to use different techniques for its design: photo printing. 3D images, panels and graphics.

3 In the form of slabs, similar to large tiles. To fasten the design of these products, just like slatted panels, a “groove-tongue” locking connection is provided.

By appearance they are produced:

4 With veneered surface, When upper layer consists of a thin coating natural wood, which is called veneer. The product looks completely identical to the natural one. wooden board and significantly lower cost.

5 With laminated surface, which is a thin coating with a special film, simulating various natural materials, colored or plain designs. The wide variety of designs makes laminated products the most popular MDF products for wall cladding.

6 With painted surface when the lamella is painted on top in a variety of color shades. Paint performs a protective and decorative function.

7 The image is applied to the front side of the panel. The top is coated with acrylic colorless varnish, which protects it from external damage.

8 Panels with a pattern or design that has a 3D effect. These products are newly developed and new design design. The surface of the products, on which abstract three-dimensional drawings are depicted, geometric figures simulating relief different types, looks unusual and very impressive.

TOP 7 options for using modern MDF panels

Now, having such a variety of MDF products, you should not limit yourself to finishing only the corridor, balcony or loggia, although they can be decorated in a completely new way by choosing suitable option design. You can successfully decorate the walls of the living room, hallway, kitchen, as well as ceilings, entrance doors, and the sides of staircases with such sheets.

Let's look at how to decorate with panels MDF rooms and places with different purposes.

Decorating the hallway with MDF panels

Taking these features into account, it is better to decorate the hallway with slatted panels. They are convenient for cladding a hallway, because they have small size and can fit into any problem area.

The appearance of the surface of such products should correspond to the style of the hallway and its characteristics. For cladding a small hallway, light, monochromatic products are better suited; they will visually enlarge the room.

It is successful to use vertically arranged panels of yellow and white, which alternate with each other. The doors are upholstered with brown slats to match the furniture elements located in the corridor.

The walls in the hallway cannot be completely finished with panels. The corridor looks interesting, in which the walls are covered with MDF only on the bottom, and on top are covered with wallpaper that matches the tone.

This design can be used for a medium-sized hallway or in a large space.

Using MDF panels to decorate the living room

For example, you can focus on one wall by covering it with 3D panels with a pattern that suits the style. The photo shows a design option for a living room, in which one wall is lined with 3D elements in the form of waves. This panel fits well under general interior living room.

Designers often use panels to cover one wall to complement some piece of furniture, for example, finishing a wall on which a TV hangs.

If you nevertheless decide to cover the walls in the living room entirely with panels, carefully consider their location. The longitudinal arrangement is suitable for rooms with low ceilings. This visually increases the height of the room.

The transverse arrangement is suitable for large spaces.

Bedroom decoration

MDF is not afraid of large temperature fluctuations and is not subject to deformation due to this. It is also better to cover the walls in the living room in fragments. The wall at the head of the bed is often decorated with this material.

The cladding of the wall behind the berth with 3D panels with an imitation of carriage reupholstery looks interesting. This design looks especially modern.

The use of MDF panels in the decoration of bathrooms and toilets

Modern MDF wall panels can be successfully used for finishing bathrooms and toilets. Nowadays many types of such products with moisture-resistant qualities are produced.

With their help you can successfully imitate ceramic tiles, without fear of destruction of the material from moisture. At the same time, it will cost much less than tiles. At the same time, the variety of design designs is much wider than ceramics. You can use panels with fragments of a painting applied to them to create a whole panel in the bathroom.

By choosing the products in the form necessary to implement your intended style, you can decorate your bathroom in a completely original way.

The bathroom is finished with panels coated with protective varnish in dark colors. With a white bathtub and sink, the walls look magical.

By using a design in light colors, you can get a completely different look for your bathroom.

Such walls will last quite a long time. They also wash well from dirt without losing color brightness. The only negative is that you cannot use aggressive cleaning agents to avoid scratching the protective surface.

The protective and decorative layer of MDF must be protected from damage so as not to reduce the material’s resistance to moisture.