Clothesline in the bathroom. Wall-mounted clothes dryers: review of modern models. Bath accessories

Thanks to modern washing machines such as automatic washing of clothes no longer requires much physical effort, and models with a built-in drying function completely eliminate the hassle of hanging clothes.

However, competent housewives know that proper drying guarantees easy ironing of clothes.

The only way to dry laundry properly is by hanging it, but residents of apartment buildings usually do not have enough space for this purpose.

Lines for drying clothes in the bathroom, which were used by the older generation, are no longer relevant.

Therefore, designs such as drying clothes in the bathroom are especially popular.

Types of devices

The main criterion in the manufacture of dryers is to ensure comfort during use.

But since the sizes of bathrooms can vary significantly, you need to approach the choice taking into account the individual characteristics of the space.

There are several variations of clothes dryers for the bathroom:

• Wall-mounted – distinguished by fastening directly to the wall.
• Liana - this model is mounted on a ceiling structure.
• Mobile or floor drying.
• Active dryers are recharged from the electrical network or from the heating system.

Wall-mounted bathroom dryer

Wall-mounted models for drying clothes are the most popular because their reliability has been proven over the years.

There are two types of construction:

Drum device. This design has a complex structure.

It is a drum with locking elements and a mechanism with springs.

To hang it, you need to fasten the end of the rope to a special bar, and secure its second part to a drum hidden in the box.

This bathroom drying model can withstand a large volume of laundry (from 10 to 15 kg).

However, this device has some disadvantages.

Rapid wear of ropes due to constant tension, as well as possible defects in spring mechanism(poor quality springs quickly become unusable).

A hanger for drying clothes in the bathroom or a telescopic console mechanism.

This design consists of metal tubes or strips.

This dryer can be attached to any wall of the room. A positive quality of a hanger is its space efficiency.

This is due to the fact that the dryer can be stacked close to the wall.

However, there are also disadvantages, in particular the minimum level of load - this model can withstand only 5 to 7 kg.

Ceiling view of drying in the bathroom

For small bathrooms, as well as for rooms with high ceilings, you should choose the Liana dryer model.

Its design consists of many ropes and hanging roller mechanisms.

The device of such drying consists in metal frame attached to the ceiling. Rollers equipped with ropes are attached directly to the frame.

In turn, the ropes hold special tubes on which laundry is hung, and with the help of rollers the tubes can be lowered or raised.

Today, similar models are also made for wall mounting. The difference between wall and ceiling vines lies only in the method of fastening and the supporting structure.

Mobile or portable dryers

The most popular option for a floor clothes dryer is a folding design that looks like an ironing board.

Also, quite often housewives choose dryers on wheels, which are easy to move from one room to another.

Both models are made of metal, and they are particularly strong and durable, since they have a simplified design without rollers, brackets and other devices.

Portable dryers include a model resembling a book with special support bars. It is necessary to place such a dryer on the bathtub itself, focusing on the edges of the container.

Active type of bathroom dryer

This variety is presented in the form of a heated towel rail mounted on the wall and heated by power from the mains or from the heating system.

Installation of this design is not difficult; it also has a long service life, provided that the model is of high quality.

This applies to stationary dryers. Portable structures differ from stationary ones only in the way they are powered.

Before purchasing this or that model, you should familiarize yourself with photos of bathroom dryers in order to have a clear idea of ​​which design to choose for yourself.

Photo of bathroom dryer

In order to comfortably dry washed clothes, a lot of devices have been invented today. They take up minimal space, can withstand heavy loads and can be almost invisible to the eye. This article will present the types of clothes dryers and will also discuss their features.

Types and features

Based on the type of design, all dryers are divided into simple (without additional mechanisms), folding (with special flaps, which can be used to increase the hanging area) and sliding/pull-out (built-in grooves allow you to quickly move the dryer apart).

And according to the place of attachment, dryers can be divided into wall-mounted, floor-mounted and ceiling-mounted. There are also portable models that can be placed anywhere.

Wall mounted

Wall dryers are the most popular product option. When installing, you need to make sure the wall is strong and leave enough space for unfolding the dryer. Not all models provide for a large load, but almost all provide the opportunity to save space.

There are many types of wall dryers:

• inertial folding;
• in the form of an accordion;
• telescopic;
• lift type dryers;
• folding;
• stationary.

Inertia folding dryers are two parts installed opposite each other on the walls. A spool of ropes is attached to one, hooks to the other. The ropes need to be pulled out and secured to the hooks. When folded, this model takes up almost no space, but when disassembled it can accommodate quite a lot of laundry.

An accordion-type dryer is attached to one wall and, if necessary, moves apart according to the accordion principle. The role of ropes in such a dryer is played by thin tubes that do not leave creases on the dried laundry. The number of these tubes varies from 5 to 10 pieces. Often the dimensions of such models are not suitable for drying bed linen. The products are installed in bathrooms; they are very compact when assembled.

Telescopic dryers extend using a different mechanism. Such models can be extended fully or halfway. They are designed for drying light items such as socks, T-shirts, and shirts.

The lift type dryer is the most versatile. Often it is placed on the balcony or in the bathroom. It takes up little space, but can accommodate quite a lot of laundry. This dryer is more likely to be a wall-ceiling dryer, because some of its parts can be attached to the ceiling. The design has next view: two strips with metal tubes are attached to the wall; thanks to a special mechanism, these tubes can be lowered to the desired level and then raised with the hanging laundry.

This dryer allows you to hang things at different levels, so they are better ventilated. The mechanism can withstand up to 25 kg of clothing, for which it is considered the most durable and convenient.

The folding dryer also supports a decent amount of weight, but has a slightly different design. It can recline at any angle. Folding or unfolding takes seconds, and you can choose the number and width of the partitions yourself. Often the structure is placed in the bathroom or on the balcony.

A stationary wall dryer is the most common option. It consists of two planks attached to opposite walls. There are ropes stretched between them. It is most convenient to equip such a device on the balcony. The length of the ropes depends on the dimensions of the balcony; it will also be equal to the length of the ceiling.

There is also a roller dryer that can make hanging laundry much easier. The slats contain a roller system that allows you to pull the rope, thereby moving it as you hang it.

Ceiling

Ceiling dryers have more complex mechanisms than wall dryers and are used less frequently. Their main advantage is saving space. The design and size of such dryers can be made absolutely any way.

There are several types:

• The “liana” or “lift” dryer has hanging tubes, which were described above.
• The ceiling accordion has the same mechanism as the wall-mounted model, only it is fixed to the ceiling. They can use both ropes and tubes.

• Hanging. It is designed for drying lightweight clothes and has a very primitive device: a hook with a bar on which clothespins can be additionally attached. Usually these are short-lived models made of plastic, but there are more reliable variations made of metal and wood.

Floor

Floor-mounted folding dryers are mobile and can be placed in any room. In addition, when folded they take up minimal space. The configuration of such models can be completely different. But the basic elements remain unchanged: the frame ( various shapes), fixed legs attached to it and a lock that prevents the dryer from suddenly folding. Some models have wheels for easy movement.

Floor dryers have many important advantages:

• There is no need to install and assemble the structure; you can start using it immediately after purchase.
• When folded, the dryer takes up very little space and can fit in a pantry or closet. For small apartments this is a significant plus.
• Most models can withstand heavy loads.
• Standard models can be purchased at a fairly low price.
• Structures made from quality materials, can last for many years even with frequent use.
• The lightness of the design allows you to easily carry it if necessary.

The only disadvantages include the long process of drying clothes. This can be reduced by placing the dryer in a well-ventilated area.

Floor dryers can be vertical. In them, planes with ropes are located one above the other. Their height can be adjusted and reaches two meters. Such models are called whatnots; they are often installed in shower stalls.

Portable

Portable dryers are suitable for small apartments (rooms). They are convenient due to their compactness and can be installed on a radiator, bathtub, door, cabinet. The only negative is that you won’t be able to dry a lot of things at once.

Electrical

If you need quick drying, electric models are perfect. In them, the process goes faster, compared to rope structures, due to heating.

Electric clothes dryers for the bathroom are very popular today. The structure does not need to be connected to a hot water supply, unlike a standard towel dryer (coil). All you need is network access.

The main feature of electric drying is the heating element located in mineral or natural oil. Other liquid may be used. The main thing is that it conducts heat well.

Thanks to the oil, the tubes heat up evenly, and wet things dry very quickly.

Owners of such models highlight the following advantages:

• Lingerie acquires pleasant aroma after drying.
• The heating temperature can be adjusted.
• You can purchase a model with ultraviolet lamp or an ionizer included.
• The dryer can be installed anywhere in the bathroom, because its device is not connected to a pipeline and does not depend on the supply of hot water.
• The operating time is adjusted manually.
• The temperature inside the tubes does not rise above 60 degrees. This allows you to gently dry delicate fabrics without getting burned when touched.
• An electric dryer can be useful as an additional heat source.

Of course, some fabrics cannot be dried in such devices. But this is often written on the item’s tag.

The only disadvantages include electricity consumption, but many note that the advantages of the device compensate for this nuance.

Bath dryers

There are miniature models of dryers that need to be installed directly on the bathtub. They usually have rubber tips on the legs, which secure the structure well and prevent it from rolling off the edges.

In principle, this dryer is similar to a sliding floor model, only after use it is removed. They are also called umbrella models. On average, they can withstand up to 10 kilograms of wet clothes.

Battery dryers

These miniature options are great for drying small items all the time. heating season. The heat from the radiators dries fairly quickly without any cost. Battery dryers can replace the electric model in winter time. They are small in size and can be stored anywhere.

The first thing you should pay attention to when choosing such a dryer is the attachment mechanism to the radiator. Many apartments still have old-style batteries in the form of an accordion, and not every one of them is suitable for attaching such a structure. First you need to measure the battery and compare its length with the length of the dryer. It is also worth considering that a low-quality dryer can deteriorate under the influence of high temperature emanating from the battery.

Drum dryer

Externally, this dryer is very similar to a regular washing machine. The mechanism includes a drum in which clothes are dried. Drum dryers dry faster than all other types - from 30 minutes to an hour. But there is a nuance: clothes and linen will be very wrinkled after drying this way, and it will be more difficult to smooth them out.

Another controversial issue is the need to connect the drum dryer to sewer system so that it is possible to remove moisture. This requires additional financial costs and the involvement of specialists.

Mounting methods

If we consider the models based on the method of their fastening, then there are few options. The design can be built into the wall, suspended from the ceiling, or be mobile.

Hanging dryer

The structure consists of plastic tubes with ropes stretched inside them. The dryer is attached to the ceiling, and the slats can be easily lowered to hang laundry and then raised by pulling the necessary ropes. The mechanism can be mounted both above the bathtub and on the balcony.

Stationary dryer

The easiest option for self-made: the required number of hooks are attached to the opposite walls, and clotheslines are stretched between them. The tension can always be adjusted.

Stationary includes any model that is attached to the wall (panels) and does not move. For those who do not like the suspended ceiling system, they came up with hangers for the balcony, which are removed from the hooks after the laundry has dried.

Materials

The material from which the dryer is made is of great importance. The service life of the product, its strength and susceptibility to moisture depend on it. There are several most common options:

• Aluminum dryers. They are light, but not stable enough. To prevent aluminum from turning black over time, manufacturers cover models with a layer of polymer. But this coating, as practice shows, cracks after some time.
• Dryers from of stainless steel. This material is ideal for similar designs. Moreover, both the body and the strings can be made from steel. It is very strong and durable. The disadvantages include its heavy weight (which will increase stability for floor-standing models) and cost.

• Plastic dryers. The plastic option will not last long, but it is good because it is cheap and light. Often, models are used for drying light items (socks or underwear).

• Wooden dryers. From an aesthetic point of view, these are the most stylish models. But to extend their service life, the board must be regularly coated with protective solutions.
• Combined. Multi-material dryers are less common and are often homemade.

How to do it yourself?

If the apartment has necessary tools, then you can assemble the dryer yourself.

Here are step-by-step instructions for making the simplest design:

• First you need to attach two wooden planks on opposite walls (for example, on a balcony).
• Then you need to screw ring-screws into these strips. You will need two pieces for each rope (one on each side). The number of rings in a row depends on personal wishes and the length of the strips.
• In order for the screws to fit well, you must first make holes for them. The diameter should be slightly smaller than the screws themselves. These holes must be thoroughly cleaned before screwing in.
• If there are gaps near the screws, they must be sealed to increase the strength of the entire structure.

For homemade dryer of this type, you don’t have to cut the rope into pieces, but simply take the whole one and pull it through all the rings.

Before starting, it is important to carefully inspect the walls of the balcony for cracks and voids. If there are any, it is necessary to seal them, otherwise the wet laundry may one day overwhelm and the entire structure will collapse. It is also advisable to make markings on the walls, taking into account the future location of the dryer.

It can take an hour to an hour and a half to make and only requires rope, a couple of wooden planks and about ten screws. Any housewife can handle this kind of work.

Making a folding dryer will be more difficult. But, following the step-by-step instructions, you can do it pretty quickly. For such a design you will need wooden planks, rods, a sheet of plywood or plasterboard, furniture hinges, hooks, fasteners and paint.

• Procedure:
• First you need to drill holes in the opposite parts of the frame, which in diameter will be equal to the cross-section of the rods.
• The rods are inserted into the holes. They can be thinned at the ends to make them easier to fix.
• Next, you need to assemble the frame, fastening the elements together with nails.
• The base of the dryer is prepared, which should be 12-15 cm longer and wider than the frame.
• The bottom bar of the frame must be attached to the base using furniture hinges. Then the entire structure needs to be painted water based

• and wait until it dries completely.
• A latch is attached to the side opposite the hinges for fixation. A folding structure is installed. It is important to decide optimal angle
• for the mechanism so that the folding bed does not take up too much space.
• Next you need to hang hooks for small items on the side of the frame.

The dryer is attached to the wall using screws. You can decorate the product by painting the rods in different colors

. It is important to choose shades that will harmonize with the design of the entire room/balcony.

You can also make a floor dryer with your own hands, which in its design is very similar to a table-book. It may seem that such a design is quite difficult to make, but it is not.

• For production you will need:
• plastic-lined chipboard or MDF boards (two sides - 60 by 20 cm and two on top and bottom - 70 by 20 cm);
• self-tapping screws;
• any parts that act as handles;
• steel pipes for hanging laundry (20 by 2 mm and 18 by 2 mm);
• stainless steel rods (10-12 pcs);
• steel pipes for a support that will recline (6 pcs);
• steel pipes for the frame (4 pieces 60 cm each and 4 pieces 70 cm each);
• steel pipe 18 by 2 mm;
• nuts;
• corners (4 pcs);

Making a folding dryer will be more difficult. But, following the step-by-step instructions, you can do it pretty quickly. For such a design you will need wooden planks, rods, a sheet of plywood or plasterboard, furniture hinges, hooks, fasteners and paint.

• Boards forming future frame, you need to fix them together using steel corners and self-tapping screws.
• Wheels are mounted to the bottom of the structure.
• Next you need to connect the entire body using ties on the top. To make the frame and body you will need hinges.
• The next step is to connect the rods and frame. It is important to maintain the same distance between parts.

To avoid rust, it is advisable to paint the assembled dryer. The structure will regularly come into contact with moisture; it is important to extend its service life by painting. First, the entire surface must be degreased (for example, with acetone) and coated with a primer. The best option would be car or acrylic paint applied in two layers.

This product can be placed in the bathroom, kitchen or any living room. If necessary, it can be folded and put away in a matter of seconds.

To learn how to make a clothes dryer out of wood with your own hands, see the following video.

Which is better?

There are main characteristics that you should pay attention to when buying a clothes dryer:

• Square work surface. It is the sum of the lengths of all the rods (ropes) in the unfolded state. The higher this value, the more massive and expensive the model will be.
• Number of rods (ropes). Their number determines the width of the model.
• The presence of tiers and their number. Multi-tiered designs allow you to place a lot of laundry at once and save space. But their cost will be appropriate.
• Maximum load. This indicator is determined by the type of design and material of manufacture. Accordingly, the greater the load the model can withstand, the longer it will last. The simplest wall-mounted dryers can usually withstand about 7-10 kg of clothes, while floor-mounted folding and “liana” dryers can hold up to 25 kg.
• Additional details. These include transport rollers on floor structures, which make them easier to move. Wheels are usually made of rubber or plastic.

Plastic wheels coated with rubber are more practical because they will not leave marks on the floor. They should be accompanied by a fastener so that after moving the dryer does not roll away.

• The presence of compartments for drying shoes. Standard dryers with large distances between the strings are not very convenient for placing shoes. Therefore, if you plan to dry your shoes every day, you should take care of the presence of such compartments in advance.
• When choosing a dryer, you need to clearly know the future location of its installation. For balconies, “lianas” and conventional ceiling mechanisms are more suitable. For placement in the room - floor dryers.
• When purchasing, it is important to pay attention to the quality of fasteners and ropes. These are precisely the details on which the strength of the structure and its service life directly depend.

Attention should be paid not only to the material and size of the dryer, but also to its design. It is clear that this item is completely household, but modern manufacturers sometimes design it as a full-fledged decorative element, so that it is not immediately possible to guess its intended purpose.

If the location of the dryer is a closed balcony, then you need to take into account some factors in advance:

• dimensions of the balcony and its heating capacity;
• the maximum weight of the laundry that is planned to be dried;
• wall and ceiling finishing materials, repair features.

If it is quite cold on the balcony, then you should not mount the structure very close to the ceiling, otherwise your clothes will freeze. The thickness and quality of fasteners directly depends on the weight of the items that will be dried. For light clothing, regular ropes and a plastic base are suitable. Blankets or winter clothing require thick ropes and a metal frame.

The material from which the house is built also matters. The fact is that it is quite difficult to make ceiling holes in panel buildings, and for concrete walls you will need special nuts.

The following rules must be observed when using dryers:

• If you plan to hang heavy bed linen on a ceiling dryer, then you should not opt ​​for models with aluminum slats. Most likely, they will not withstand the load and will simply bend.
• Before finally installing the dryer on the balcony, you can fully open the windows and check whether they will touch the hanging laundry in the future. This is relevant for owners of spacious balconies, where this can be avoided.
• After each use, the entire structure of the dryer must be wiped first with a damp cloth, then with a dry one.
• If the dimensions of your apartment or bathroom are very small, then you should pay attention to vertical dryers. They do not leave scratches on the floor, take up minimal space, and are easy to assemble.
• It is important to thoroughly wring the laundry before hanging it. This will reduce the load on the dryer and keep the floor clear of water that might drip from your clothes.
• Metal structures may develop rust with frequent use. At the first sign of it, you must immediately treat the area with an anti-corrosion solution, or better yet, lubricate the entire dryer.

• When purchasing a dryer, it is very important to consider the distance between the ropes (rods, tubes). The greater this distance, the faster the laundry will dry and the more convenient it will be to hang it. The optimal distance is 7-9 mm. If this value is less, things will touch each other, and this will significantly increase the time for them to dry completely. In addition, some items fade and need to be hung separately.
• It is not recommended to buy a dryer whose rods are attached by welding, because this most often leads to corrosion. An excellent alternative would be rolling and plastic caps at the joints. With this system, puffs will not form on clothes.
• If you do not plan to put the dryer away for a long time, then you can make sure that it fits into the interior of the room by matching the color of the model to the tiles, furniture or curtains.
• Another nice bonus is that drying things indoors in winter humidifies the air well.

• To extend the life of your dryer, it is important to monitor how the ropes are worn or structural parts fail. This is especially true for plastic models, which wear out much faster than metal ones. A good manufacturer will make parts subject to wear in such a way that they are easy to replace.
• The most common faults are bracket deformation and gear wear. Again, this is very common with plastic models. You can buy similar parts and carry out the repairs yourself. The only tools you need are pliers and a screwdriver.
• To replace the roller wheel, you need to pull out the pin that holds it. The new gear must be secured using the same rod.
• There is nothing difficult about replacing the cords: they pass through the bracket just as easily as during initial assembly.
• If you periodically hear a creaking sound when using the dryer, it would be a good idea to lubricate the friction points with technical oil. It’s just important not to overdo it and wipe off the residue so as not to stain your clothes.
• The easiest way to solve the problem of a broken bracket is to buy a new dryer.
• If you can’t fix the dryer yourself, you can trust experienced craftsmen. They'll pick you up quickly the required part and save time.

• If you have a lot of clothes made from delicate fabrics in your wardrobe, you should pay attention to electric dryers with a built-in thermostat. This way you can reduce the risk of damage to a minimum.
• If there is a need to dry hats, when choosing a model, you should pay attention to the presence of additional holders for small items.
• Some models even provide air ionization function. For this purpose, an ultraviolet lamp is built into the design.
• Although manufacturers assure that their products are completely safe, it is better to play it safe and not allow children to turn on and off electric models on their own. But often Maximum temperature such models do not exceed 60 degrees, and there is no risk of getting burned.
• If you plan to place the electric dryer on the balcony, then it is worth waterproofing it first to prevent moisture from entering the mechanism from the outside.
• When choosing an automatic dryer, you need to pay attention to the labeling, which indicates the energy consumption of a particular model. The letter “A” denotes the most economical models, the letter “G” denotes the most energy-consuming and powerful.

If there is no need for maximum power, the optimal choice would be a model with an average indicator. This will allow you to enjoy all the benefits of the device and not overload the wiring.

• If the issue of saving space is urgent, then you can give preference to installing a dryer outside the apartment, i.e. street version. It is often installed with outside balcony This option is not very convenient because:
• The ability to dry clothes directly depends on the weather.
• There is no certainty that clothes will not be blown away by a strong gust of wind
• From an aesthetic point of view, such a design does not decorate the apartment at all.

• It is important that all existing dryer mounts are metal. Many manufacturers make them plastic, but this only saves money on manufacturing and shortens the life of the structure.
• In a creeper type dryer, the wires can be metal or nylon. And here it is worth making a choice in favor of metal ones. But if you still choose nylon ones, then for a long service life they should be no thinner than 3 mm in diameter.
• In order to understand the design and equip it correctly, you need to read the instructions. Even if the manufacturer is foreign, the inserts must be duplicated in Russian. If the instructions are unclear or completely absent, you should think about the integrity of the manufacturer and the quality of the product.
• Particular attention should be paid to the mounting bolts. Often the kit includes plastic dowels and fairly short bolts. With tube lengths exceeding 1200 mm, the length of the bolts may simply not be enough for reliable fixation. Therefore, when purchasing a massive model, it is better to immediately take care of strength and buy good anchor bolts.

• When caring for electric dryers, be sure to wipe the edges of the air ducts with a simple cloth (napkin) without using detergents or chemicals.
• The rotation of the tank in a drum dryer can be one-way or two-way. The latter ensures uniform drying of clothes and speeds up the drying process itself. It is important that the tank is made of stainless steel or other durable metal, otherwise the dryer will not last long.
• Every automatic dryer has a filter. Threads, lint, wool and other things accumulate in it. small parts. When choosing, you need to take into account that this filter is fairly easy to get out, because it will have to be cleaned regularly by hand.
• Some automatic dryers even have an ironing mode. Things rotate in the drum in a certain way, are blown with cold air and come out of the dryer completely ready for use.

Manufacturers and reviews

It’s easier to decide on a suitable option after familiarizing yourself with the most popular models from the best manufacturers. pay attention to detailed characteristics high-quality dryers with different functionality.

Gimi Lift 160

This wall-ceiling dryer will help you make the most of the space above your bathtub. It has a fairly strong frame and reliable fastenings. Manufacturing materials: stainless steel (brackets and rods), plastic (rollers) and textiles (hanging cords). This model does not require special care, just wipe it occasionally. It is not afraid of humidity, which is why many people install it in the bathroom.

The brackets are attached to the wall or ceiling. The roller mechanism allows you to hang clothes quickly and easily by lowering the plastic rods one at a time. The total length of the entire surface for linen is 9.5 meters and can accommodate up to 15 kg of linen. There are no creases left on the clothes after drying thanks to the rods with a diameter of 1.2 cm.

This model is most often installed in the bathroom, but it is also quite suitable for the balcony. The durable design, when properly installed and maintained, allows the dryer to serve for many years.

Gimi "Dinamik 30"

Floor-standing model made of stainless steel. Suitable for installation in any room. The total length of the steel slats is 27 meters. The package includes doors that can be opened, thereby increasing the usable surface area. The drying rack can be pulled apart to hang curtains or bed linen.

Protective corners are attached to the legs to prevent scratches on the floor. The dimensions of the dryer when unfolded are 198 (258) cm by 57 cm by 102 cm. When folded, they are 116 cm by 57 cm by 10.5 cm.

Gimi Extension

Another variation floor model from the manufacturer Gimi. The dryer is equipped with a telescopic sliding system, wheels and plastic holders for small things. The impressive maximum load is 25 kg, the total length of the working slats is 20 meters. The model is made of stainless steel with polymer coating and weighs 5.35 kg. The dryer folds easily and when assembled does not take up much space.

Eurogold EK Stabilo

This model is chosen by those who often wash and dry a lot of things. It is especially relevant for large families, where washing becomes a daily activity. This dryer is a floor-standing design and has a folding mechanism. It can be installed in any corner of the apartment.

The design consists of three main elements: a central large compartment, including 8 durable rods, and two compartments on the edges for hanging smaller items (each with 5 rods).

The useful length of this model is 16 m, and the maximum load is 20 kg. The metal structure will not bend under the weight of wet laundry. There are also a couple of plastic parts included, but they are placed on the legs and serve to protect the floor from scratches. The dimensions of the dryer are 128 cm by 55 cm by 101 cm.

Lakmet Liana

This dryer is very compact, but at the same time it has 10 meters of useful length and is often installed in the bathroom or on the balcony under the ceiling. The model includes 5 rods with a rather impressive diameter of 1.2 cm. This allows you to dry clothes without creases. The structure itself is mounted to the ceiling using plastic brackets with rollers, and the rods are positioned horizontally.

The model is convenient because the height of the rods is adjustable, which makes hanging laundry easier. This miniature dryer can withstand a load of up to 7.5 kg and is quite suitable for drying bed linen.

Artmoon Blues

This model is famous for its size usable space– more than 20 meters. It consists of 6 ropes 3.6 m long. Such dimensions allow you to dry several sets of bed linen at once. The most interesting thing is that you can choose the length of the ropes yourself, based on the size of the bathroom or balcony. The tension level can also be selected and fixed.

The model is equipped with a special mechanism that allows the ropes to be completely retracted. Thus, you can “hide” the dryer in any room. Its parts are attached to opposite walls using screws and dowels. Durable polyester ropes can withstand loads of up to 15 kg.

Leifheit Tower 190

The floor dryer has one main fundamental difference from other models - vertical design. This feature allows it to be placed in a shower stall. The dimensions of the model are 160 cm by 60 cm by 60 cm. The model is quite narrow, and this feature limits its functionality. The maximum load is only 6 kg (about the same as a standard automatic dryer), but average cost There are more such models than conventional folding dryers.

Foppapedretti Peter-Panni

This dryer has interesting feature– the frame is made of natural beech. The height of the structure is also noticeably different from the standard one - 174 cm. There are folding surfaces with slats on the sides and in the center.

Design advantages:

• When folded, it has very compact dimensions - 18 cm by 50 cm.
• The total length of the useful surface is 25 meters.
• The diameter of the tubes is 8 mm, which prevents creases in the fabric.
• Wheels with protective nylon pads allow you to move the dryer without harming the floor.
• The middle shelf can be used as a table on which it is convenient to fold laundry removed from the side surfaces.

Flaws:

• has an impressive weight of 7.8 kg:
• The average cost is quite high:
• In working condition it takes up quite a lot of space.

Leifheit Rollquick

This stretch dryer is very compact and when folded it looks like a small plastic case. Its dimensions are 7 cm by 8 cm by 50 cm. The structure can be attached to a wall in the bathroom or any other room: it will be practically invisible.

Before hanging the laundry, you need to pull out the crossbar with 5 thick strings and hook it to the hooks on the opposite wall.

Design advantages:

• She doesn't spoil general form room while in the folded position.
• The degree of tension of the cords can be adjusted.
• Maximum load – 7 kg. For the existing dimensions this is a very good indicator.
• The strings rewind automatically.
• The product is sold at an affordable price.

Flaws:

• The cords begin to sag over time.
• It is not always convenient to adjust the tension of the strings due to the fact that they are connected together.

Granchio-Household Calabria

A generally accepted universal model. It was designed to be attached to a wall, but can be fixed in a horizontal plane. The set includes 6 slats of 160 cm each, which are secured with nylon cords. They allow you to lower and raise the crossbars to the desired height.

Design advantages:

• The design is as simple and durable as possible.
• The tube-shaped crossbars do not leave creases on clothing.
• The slats are coated with an anti-corrosion compound.
• All necessary fasteners are included in the kit.
• Low cost. Literally everyone can afford such a dryer.

Flaws:

• White cords get dirty quite quickly and lose their presentable appearance.
• The product is not suitable for drying blankets or bed linen.

Badoogi All Mom 2

This convertible drying rack on wheels is equipped with three shelves with 6 slats on each of them. The dimensions of the model are 143 cm by 64 cm. The total length of the surface used is 20 meters.

The package includes additional plastic holders on which you can hang 10 more hangers. This is very convenient if you have items made of delicate materials in your wardrobe that cannot be dried using the usual method.

Design advantages:

• The reliable frame can withstand loads of up to 30 kg.
• The height of the beams can be independently adjusted and fixed in the desired position.
• Thanks to the wheels, the model is easy to move.
• When folded, the width is only 22cm. You can store it simply by leaning it against the wall or hiding it in a closet.
• The set includes 72 hooks for securing small items.
• The impressive distance between the bars - 7 cm - allows things to dry faster.
• The structure weighs only 4.6 kg.

The disadvantage is that all fasteners and holders are made of plastic, which cannot guarantee a long service life of the structure.

Termolux CD 302 STR

This is a fairly popular electric folding model. It has the familiar design of a table dryer with folding wings, but it dries things much faster thanks to the built-in electric heater.

Design advantages:

• The side parts rise quite high, which allows you to dry large items (for example, long curtains).
• The strings are heated to an optimal temperature of 50-55 degrees Celsius.
• The maximum load of the dryer is 15 kg, which is electric models is a very good indicator.
• Economical energy consumption – about 0.22 kW.
• The total length of the working surface is 12.5 meters.
• The price of the product is quite affordable compared to other electric dryers.

The downside is that things dry unevenly - they quickly become dry on top and remain damp on the bottom. This happens because heating occurs only in the area of ​​the strings.

Beautiful examples

• Telescopic wall dryer – great option for placement above the battery. When folded, such a model will not attract unnecessary attention, but when unfolded it can accommodate a sufficient amount of laundry.

• The design of the folding floor dryer is very interesting. Such a thing is more of a decoration than a practical household item: using wood for the frame of the dryer is undesirable. But such a model, even with things hung on it, looks very stylish and original.

• The model, which is popularly called a whatnot, has a shelf for drying shoes, which is very practical. Of course, the bookcase is not intended for hanging bed linen, but it is great for drying simple clothes. It’s also nice that the design folds down to a very small size.

• A dryer that attaches only to the bathtub is often used to dry small towels or rags. It is quite convenient because the water flows directly into the bathtub, and there is no need to put anything underneath or constantly wipe the floor.
• The folding design is convenient primarily for its vertical arrangement and the ability to place clothes directly on hangers. This is useful when drying clothes that cannot be dried normally.

• The dryer with a folding design looks very stylish and complements the interior favorably. When folded, you can't even see that it's a dryer.
• The standard design of a creeper dryer looks interesting. If you choose the color of the model to match interior decoration balcony, then in the folded position it will hardly stand out.

Washed clothes need to be dried somewhere. Owners of private houses will easily install clotheslines on their property for this purpose, and residents of high-rise buildings will use loggias. But what should the happy owners of first-floor apartments, where there are no balconies, do, and leaving their belongings unattended on the street for a long time is quite dangerous.

This is where special clothes dryers come to the rescue, which are easily placed in bathrooms. In fact, it would not hurt every owner to have such equipment, since it is inexpensive, but it allows you to cope with the mentioned task in cases where the balcony space cannot be used and it is raining outside. Next, I will introduce you to this device in more detail.

A little about motivation

To begin with, I would like to dwell in a little more detail on the benefits obtained from using clothes dryers in bathrooms:

1. No need for a free balcony.

But the following situations may occur:

• It doesn’t exist at all, let alone free;

• It is used as a storage room, and old skis will not be the best best neighborhood washed clothes. And it will be inconvenient for you to hang something there;

• It is equipped as an office. If you value your computer or other electronic equipment, then it is better to keep sources of moisture away from it;

• Do you expect smoking guests? Where will they go out to smoke? That's right, on . And people have no need to admire your linen, which will also get in the way, and the linen itself should not be saturated with tobacco smoke;

1. Safety. Near high-rise buildings you can also often find stretched clotheslines. But this means that, in fact, any passerby will be able to remove the things you hang and take them home. This, of course, does not apply to private areas; they are guarded by a strong fence, and sometimes by an angry dog;

1. Ability to dry even in rainy weather. This again applies to the use of outdoor clotheslines and “hits” even the owners of their own fenced land plots, because rain doesn’t care about fences and angry dogs.

Varieties

So, what types of dryers can effectively replace loggias and outdoor clotheslines? Now I’ll tell you everything:

Substitute No. 1: wall-mounted dryer

As the name suggests, we are talking about a structure that is attached to the wall and can have two interpretations:

1. Rope. It consists of ropes stretched over the bathroom from one wall to another, similar to those that are hung on the street.

In turn, there can also be two types:

• Stationary– two slats connected by linen cords. The price of such products is the lowest and will practically not “hit” your family budget;

• Removable- a spring-loaded drum on which the ropes are wound, and a retractable bar with their other ends. The first part is fixed to the wall using dowels and screws, and the second part is attached with hooks to pre-installed rings opposite. When the hooks are removed, the mechanism twists the cords back;

I recommend buying a roll-up model only if you really plan to use this function. The fact is that standing on the edge of the bathtub in order to unfasten the hooks is not very convenient and quite labor-intensive. In this regard, most users simply leave the ropes unrolled, thereby paying extra money for the presence of an unclaimed mechanism.

1. Folding. It is even easier to install such devices yourself than those described above. Here it is enough to attach the main panel to one of the walls above the font using the same screws and dowels. Then a structure of metal or plastic slats, similar to an accordion, is pulled out of it, which is then hung with wet laundry.
   The main disadvantage of such a system is that due to the lack of support for the second edge, it will not be able to support significant weight, so for a large family it is better to purchase a rope or ceiling model, which I will discuss below.

On the shelves of specialized stores you can find the following models of wall dryers:

• Model "Gimi Brio Super 120":

• Model "Rollquick 210 83006":

Substitute No. 2: ceiling dryer

This type of dryer is perfect for a bathroom.

It includes:

• Two brackets, which are fixed to the ceiling surface with dowels and screws;
• Several rods. Linen is actually hung on them;
• Ropes, lowering and raising barbells. In some models, the rope system has an additional attachment to the wall.

As a result, we can talk about the following advantages of this design solution:

• Space saving. If you don't need to dry your clothes, then you simply lift the bars up to the ceiling;
. The vertical mount can withstand significantly greater weight;
• Convenientinstructionsoperation. You just need to lower one bar, cover it with the necessary linen, which may even include a large duvet cover, and then simply pull the rope, sending the wet fabric to the ceiling. The main convenience is that you do not need to reach up with your own hands, all manipulations take place right in front of you;
• Ability to dry items that cannot be folded. You can lower all the rods to one level, which will give you a comfortable table on which a woolen sweater or other capricious item will be perfectly placed.

In general, I personally purchased and installed just such a dryer in my bathroom. But everyone is free to make their own choice.

While shopping, you may come across the following representatives of this equipment:

• Model "Gimi Lift 180":

• Model “Luminarc 1.4 m”:

Substitute No. 3: battery dryer

Enough convenient option for those bathrooms that are heated I. Wet things will end up in close proximity to heating element, which will significantly speed up the drying process.

The main disadvantage of such structures is their small area and, accordingly, load capacity. So, for example, drying a sheet on a structure attached to a heating radiator will be very problematic, if not completely impossible.

Installation in in this case It’s quite simple: the product is simply thrown onto the battery with hooks, and the rest rests against it. After use, it is removed and hidden out of sight.

Substitute No. 4: hot tub dryer

Another controversial device, which is a set of tubes and stop legs, which is placed directly on top of the bathing tank.

The advantages of such a device:

• Saving useful space in the bathroom itself. That is, you can move around the bathroom freely;
• Easy to use. Here, as in the previous two cases, you don’t need to reach anywhere, all the laundry bars are right in front of you;
• Quite large capacity. In this case, there will be no problems with the duvet cover.

Minuses:

• Large dimensions, causing inconvenience when the dryer is not in use, because it needs to be hidden somewhere else so that it does not interfere;
• Inability to take water procedures in the font itself during operation of the structure.

And here's what you can find in stores:

• Model "GIMI Alablock":

• Model "GIMI Varadero":

Substitute No. 5: floor dryer

Essentially, this is a folding table, which during use can be placed not only in the bathroom, but in general in any room of your house or apartment. None installation work its use is not anticipated.

In the process of searching for a suitable instance, you may encounter the following options:

• Model "Gimi DUPLO":

• Model "Leifheit Roma":

Conclusion

You don’t have a balcony and it’s dangerous to hang your washed clothes outside? There is a solution: purchase one of the types of dryers installed in bathrooms, and then your things will dry without disturbing anyone, and at the same time they will be completely safe, being under your watchful supervision. Moreover, there are enough types of such structures to choose the most suitable one.

The video in this article will provide you with information Additional information. If, suddenly, you have any questions on the topic, then ask them in the comments.

Many devices have been invented for drying clothes. Functional and compact dryers can be installed anywhere, but most often a clothes dryer and towel rack are installed in the bathroom. After all, here the hanging laundry is not in plain sight, but ventilation system promotes rapid drying. Even for a small room there is an option for a bathroom dryer - a wall-mounted model.

The wall-mounted dryer does not take up much space, as it is installed on the wall, and the folding model when assembled is almost invisible, and drying small items clothing can occur even on assembled equipment. In this article we will look at the types of wall-mounted dryers, analyze their pros and cons, describe the features of their selection, placement and installation, and also tell you how to assemble a wall-mounted clothes dryer for the bathroom with your own hands.

Range modern mechanisms for drying clothes is very diverse. First of all, what catches your eye is the wide selection of shapes and types of structures, among which there are miniature models for hanging small items over the bathroom, and spacious folding structures on which you can place all the laundry from the washing machine, not to mention ordinary water heated towel rails.

There are several types of wall-mounted dryers on the market, which differ in installation method and type of design:

Folding dryer for the bathroom- This modern version a rope hanger on which our grandmothers dried clothes for many decades. This design consists of two plastic panels that are attached to opposite walls under the ceiling, and 4-6 ropes are stretched between them. If the ropes get in the way, then one panel is removed and attached to another, and the ropes, like the cord of a modern vacuum cleaner, are automatically retracted inside.

Advantages:

• ease of installation and operation;
• low cost;
• Possibility of installation in small spaces.

Flaws:

• maximum total weight linen – 7 kg;
• in models without a pull-up mechanism, the ropes sag under the weight of the laundry;
• Low-quality plastic will crack over time.

Sliding dryer for the bathroom has a more intricate design. It is a metal console that moves and extends forward according to the accordion principle. Parts sliding design are attached to the wall with reliable rivets. The laundry is hung on metal tubes located between two folding elements. After the wash has dried, the device is pressed against the wall so as not to take up space.

Advantages:

• compact design;
• ease of use;
• strength of parts;
• ability to withstand heavy weight;
• Can be used as a towel holder.

Flaws:

• small dimensions of the sliding model;
• difficulty in drying large items;
• budget fasteners may break during operation.

Electric hanger for the bathroom, as a rule, it is used as a heated towel rail, but if you are in a hurry, it can also be used for drying small laundry. The operating principle of an electric dryer is similar to a fireplace heater, and consists of a series of metal tubes connected to each other. The structure is mounted on the wall next to the socket. This device dries laundry much faster, but is not suitable for all types of materials.

Advantages:

• ease of installation and dismantling;
• ability to disconnect from the network when not in use;
• comfortable heating temperature of the tubes will protect against burns;
• can be used as a heater.

Flaws:

• the need to comply with safety rules when using electrical appliances in rooms with high humidity;
• small sizes Not suitable for drying bed linen and other large items.

Wall-ceiling Clothes dryers in the bathroom can be attached in two ways - on opposite walls and on the ceiling. The holders are metal tubes through which 4-10 ropes are threaded. Another special rope allows you to raise and lower the holders according to the principle of blinds. The main advantage is the ability to hang clothes with a total weight of up to 20 kg.

Rod dryer– this design is similar to the ceiling one, but is fixed only to one of the walls. If necessary, the rods can be easily raised or lowered to the required level. Ideal for drying woolen clothes and other items that you do not want to hang to avoid stretching. The wool sweater is placed on rods, which allows the clothes to dry without hanging them.

There are also dryer models with original designs:

• over-the-door - such structures are installed directly on the door in the bathroom. Hooks act as fastenings, so if necessary, the dryer can be easily removed from the door;
• folding - easily mounted on any vertical surface. If the structure is not used for its intended purpose, then it rises and plays the role of a panel, and if necessary, it is folded back and small linen and towels are dried on it;
• battery-powered - the device is fixed to the battery using several hooks and is used for drying small clothes.

Even in a small bathroom you can attach this wall structure, which imitates a window. Color range easy to transform to suit the overall interior design of the room:

How to choose a quality dryer?

The market for bathroom products is regularly updated the lineup clothes dryers. They still perform the same function, but the installation methods and production materials change.

The choice of design depends on how often you do laundry. If you wash clothes often, but in small batches, then it is better to choose a small console or battery dryer. If clothes are washed rarely, but in large quantities, then it is better to make a choice in favor of a folding or wall-ceiling model.

When choosing a design, you should also take into account the dimensions of the room. A wall-mounted clothes dryer is suitable for a small bathroom. To avoid mistakes with sizes when you go to the store, take a tape measure with you. It will help not only accurately measure the dimensions of the device, but also the distance between the ropes or crossbars, which should be at least 6-7 cm, otherwise hanging the laundry will be inconvenient, and it will take longer to dry.

In addition to the type of design and its size, when choosing a clothes dryer, you also need to pay attention to what material it is made of. There is high air humidity in the bathroom, and the elements of the device are constantly in contact with wet clothes, so all fasteners and parts must be rust-resistant.

1. From this point of view, the most durable designs will be stainless steel dryers. This material can easily withstand heavy loads, does not oxidize or corrode when interacting with moisture, and has an attractive appearance.
2. Metal dryers made of steel coated with powder paints or enamel are also very durable, but the special coating cracks over time, and then the steel quickly becomes covered with plaque and rust due to high humidity.
3. Aluminum structures are considered a budget option for steel fixtures. They are quite durable and light in weight, but are not durable, and are intended only for drying light laundry in small batches.
4. Plastic models for compact placement on a wall or door, despite their low strength, are in demand because they are characterized by low cost, simple design, light weight and a wide range of colors.

Another important parameter When choosing a quality clothes dryer, it’s the fittings. Loops and fastenings must be of high quality and reliable, and the strings of rope models must be smooth and durable. Choose models that include dowels and screws so that you don’t have to buy more and match them to the threaded holes.

Thus, when choosing a mechanism for drying clothes, focus on the following parameters:

• type of construction;
• room dimensions;
• material of manufacture;
• quality of fittings;
• Availability additional features(lowering-ascent, length and height adjustment);
• the maximum weight that the device can support.

The right clothes dryer will be an excellent addition to the bathroom interior and will serve good helpers on the farm.

Placement principles and installation rules

When planning to install a wall-mounted clothes dryer in the bathroom, you need to take into account some nuances.

In order not to test the strength of fasteners and interior partitions, choose a load-bearing wall to place the device. Then you will be sure that under the weight of wet things the fasteners will not fall out along with the finishing and plaster of the wall.

It is also worth considering that when drying things, you will need a free approach to the bathtub, cabinets and plumbing fixtures. Therefore, place the mechanism so that it does not impede your access to essential objects.

Try to place the device closer to the ventilation system, then the clothes will dry faster and the moisture will evaporate in time. Keep an eye on ventilation hole, cleaning it from time to time. It's good if there is a radiator in the bathroom.

We also note that the dryer should not be installed next to a mirror or plumbing fixtures and chrome parts to prevent unwanted water from getting on them.

Installation of a wall dryer should begin with choosing the most suitable place. Then follow the installation instructions specific to your model:

1. Using a bracket to secure the structure, mark future fasteners through the through holes.
2. In accordance with the marks on the wall, drill holes for fasteners in it.
3. Then, using fasteners, fix the brackets to the wall.
4. After this, attach the remaining parts of the dryer to the brackets, following the instructions in the assembly manual.

The device is ready for use!

How to make a clothes dryer with your own hands?

We know two ways to make your own device for drying clothes in the bathroom:

Method 1: rope dryer

The simplest variation of a do-it-yourself dryer is hooks and ropes located above the bathtub. Initially, it is recommended to go to a hardware store and purchase the materials we need (instead of hooks, you can alternatively use beautiful wire or thick fishing line). After all the materials we need have been purchased, proceed to marking the places where the dryer will be attached.

Mark the places where the hooks will be located: their location should be on the same line at an equal distance from each other. Drill holes in the designated places required diameter, in which securely fix the hooks. Cut the required number of pieces of the required length from the rope and pull it between the hooks. And this is how we assemble a simple dryer.

Method 2: overhead dryer

A more complex design will require more time, as well as woodworking tools. The dryer will be made of wooden slats with a cross-section of 2 cm. When starting work, cut down the component elements of the device: you will need two bars equal to the length of the bathroom and 6-8 bars, the length of which should be equal to the width of the bathroom. The resulting bars need to be sanded.

Place elements equal to the length of the bathtub at a distance slightly less than the width of the bathtub itself and nail short bars to them. Short elements will serve as holders for linen. The distance between them must be the same so that the structure itself also has an aesthetic appearance, and not only is reliable. The finished product can be coated with clear varnish or painted in a color that harmonizes with the interior of your bathroom.

Watch also the video on how to make a folding dryer with your own hands:

Every housewife knows that drying washed clothes requires free area in several square meters in a room with dry air. Finding such space in a small apartment is difficult. The speed of drying clothes on a balcony or loggia directly depends on weather conditions. In addition, the sight of laundry drying in full view of passers-by creates the impression of being cramped living conditions. Dryers are expensive and require extra space in the bathroom. Practical and budget option There are clothes dryers in the bathroom.

Types of clothes dryers

Manufacturers of household dryers offer a large number of options for drying clothes. They differ from each other in the following characteristics:

• installation method;
• designs;
• possibilities of movement;
• area required for organizing laundry drying.

The size and design of the selected model depends on the volume of one load of the washing machine. If the washing machine is compact and its maximum load does not exceed 4 kg, then you can choose a wall-mounted product, a model installed on the sides of the bathtub or on a heating radiator.

For small apartments, there are options for wall and ceiling dryers, allowing you to avoid cluttering the balcony with drying clothes.

Floor

Such models are convenient because they can be moved from one place to another. This property allows you to choose a room with a low percentage of humidity or good ventilation for drying clothes in order to influence the processing speed. A large number of strings allows you to hang a lot of clean laundry.

Classic floor dryers take up a lot of space when unfolded, and if space allows, you can purchase this easy-to-use model. For small apartments There are compact versions of dryer racks that, when unfolded, are stored in the shower stall.

The material from which dryers are made determines the durability of the product. A hanger made of wood and steel is considered durable. This product will withstand the heavy weight of wet laundry. Plastic and aluminum models are designed for light loads and are therefore not considered durable.

Wall mounted

When choosing a wall-mounted clothes dryer for the bathroom, you need to find out what types of designs there are:

1. Folding console with connection of side elements in the form of an accordion. Depending on the modification, such a hanger can consist of 5-10 sections for drying things. It is mounted on the wall in a cantilever and can withstand up to 5 kg of wet laundry.
2. Rope with string tension regulator. This option is an improved alternative to the clotheslines from the Soviet past. The design of this dryer is laconic, the regulator allows you to prevent the ropes from sagging.
3. Inertial folding. This is a variation of the previous model, allowing you to install clotheslines for drying clothes only when necessary. The design consists of a reel suspended at a convenient height with ropes wound on it, which are secured on the opposite wall with clamps. This hanger can withstand a load of 5 kg.
4. Telescopic with moving rods along guides. The size of this model should be chosen in accordance with the dimensions of the bathroom so that the guides can be attached to the walls. If the length of such a hanger turns out to be smaller size bathroom, the guides will “hang in the air”, creating an obstacle.

Hanging

The ceiling clothes dryer is the most popular model among buyers due to its space saving, ease of use and durability. Compared to rope ones, this design makes it possible to place laundry at a comfortable height at shoulder level, and after hanging, the rods with things can be lifted to free them. usable area bathroom. These models are called creepers.

Liana, as a recognized leader, is suitable not only for apartments with high ceilings, but also for small rooms, since it allows you to dry laundry at a level higher than a person’s height.

The bath dryer is small in size and can be used as an additional place to place wet laundry. Since the bathroom is always high humidity, you need to find out whether such a hanger has corrosion protection.

A dryer installed horizontally on the bathtub will allow you to dry delicate knitted items that cannot be wrung out after washing. When choosing such a model, you need to know exactly the size of the bathtub bowl.

Electrical

Electric dryers – suitable option for families with small children and for those who have little free time. Even jackets, blankets and children's soft toys dry quickly on such dryers.

The range of electric hangers includes floor, ceiling and wall models. Some ceiling modifications are equipped with built-in lights and a hairdryer for ventilation for ease of use.

Wall-mounted options significantly save space and do their job well. main task, even if they are small. Floor dryers come in the form of shelves, racks with covers, and transformers.

Latest technical innovations are presented in models with remote control, options with a timer and the ability to determine the drying mode.

Sliding

Such hangers are compact models that can significantly save space in small apartment. The length of these dryers ranges from 50 to 120 cm, and the width is significantly reduced after the laundry has been processed due to the possibility of folding. Such products can be made of metal or wood.

Folding

These models can serve both for drying clothes and as towel holders. Folding dryers are folding design, suitable for use in the smallest bathroom.

Pros and cons

Any dryer model has advantages and disadvantages that are worth considering in detail:

1. Floor devices do not require permanent mounting, their installation is not difficult, they can accommodate a large amount of drying laundry. Disadvantages include the need to allocate space for installation and storage when folded.
2. Wall dryers are easy to use and do not take up much space. The disadvantage is the need to perform complex installation work to install the dryer. The support brackets are secured to the wall with reliable fasteners. The disadvantages include the ability to withstand light loads.
3. Ceiling-mounted dryers allow you to use the bathroom and dry your clothes at the same time. They are easy to use and durable. The disadvantages include their complex installation to the ceiling and the product assembly process, in which it is difficult to pass the lace through the roller and the rod movement control unit. Before attaching the rollers located on the brackets, it is necessary to drill holes in the ceiling corresponding to the marks on the holders. This will help to avoid mistakes in installing the hanger.
4. Electric dryers. Despite their main advantage - high speed drying – this household appliance has significant disadvantages:
   • the need to observe safety when choosing the installation site and further operation;
   • additional electricity costs;
   • high price;
   • not suitable for drying individual species fabrics.

When choosing a clothes hanger, you need to take into account the volume of one load of the washing machine, the size of the space for installation and use, the material of the product, the quality of the connecting fittings and additional fasteners.

Before you choose suitable model, it is worth studying additional nuances:

1. Before purchasing, you should pay attention to the distance between the strings or rods on which things will be dried.
2. On a design with strings located at a distance of less than 7 cm, the laundry will remain wet for a long time.
3. The surface material of the rods is another indicator of the quality of the product, because there should be no stains left on the linen from them. Laundry will always be clean after drying on wooden and metal rods with enameled or galvanized coating.

The presence of installation instructions, product packaging, and information about the manufacturer indicate a high level of quality of the selected model.

How to make a dryer with your own hands If the bathroom accessories sold in stores do not fit overall parameters

, design or price, you can make a clothes dryer yourself.

Stretch hangers, which are the most budget option, are inconvenient because they do not lower when laundry needs to be hung or removed.

• A clothes hanger made of metal tubes requires a scrupulous selection of raw materials.
• There is a way to make an original folding dryer out of wood that will easily fit into any interior and will take up little space even when unfolded. To install a clothes dryer in the bathroom you will need the following materials:
• wooden blocks for making a frame, the length of which is selected in accordance with the size of the dryer;
• round wooden rods;
• a sheet of plywood (the base of the hanger) - a rectangle, the short side of which is 3 cm larger than the short side of the dryer frame;
• furniture hinges;
• furniture folding mechanism;

fasteners;:

1. latch for fixing (furniture lock).
2. The manufacturing process consists of 9 simple steps
3. Cut all the parts taking into account the pre-designed dimensions of the dryer.
4. Drill symmetrically located blind round holes of small depth in 2 side bars. The diameter of the holes must match the diameter of the round rods.
5. Insert the rods into the holes.
6. Assemble the frame structure from two long beams and the resulting blank. Secure the frame at the corners with screws or nails. Attach the frame to the plywood sheet (base) using furniture hinges, departing 2 cm from the bottom long edge. Process the frame and base
7. acrylic paint or varnish. Attach 2
8. folding mechanism
9. on one side to the side bars of the frame, and on the other to the sides of the base.

Install the locking lock in the center of the top side of the structure.

When choosing a dryer, you need to focus on the planning features of the bathroom, the presence or absence of free space in it. A properly selected bath dryer is not only functional and practical, but also an aesthetically attractive item.

Video instruction