DIY banquette with a lid. A beautiful do-it-yourself banquette for the hallway - step-by-step instructions. Coffee table furniture

Do-it-yourself banquette is incredible beautiful decoration your hallway interior, but it is not just beautiful, it is also multifunctional. And often, in order not to clutter up the space, it is better to use oversized, but nicely designed items. Why is it needed at all, why is it multifunctional, what types of it exist, how to make it correctly, find out below in this article.

What is a banquette?

Such a brilliant element of any interior as a banquette was invented in the not so distant 18th century. It is a stool or small size a bench with upholstery, sometimes with a back. Some benches also serve as shoe storage, making them more functional. As a rule, they are made in the shape of a rectangle, circle or square.

This product will be an excellent addition to the interior of absolutely any room:

• banquette in the hallway - while tying your shoes you can sit on an ottoman; shoes are also often stored in it;
• kitchen - a banquette is often used as an addition to a soft corner;
• bathroom;
• bedroom - complements the calm and cozy atmosphere;
• living room - in this room this item interior can act as extra space for guests.

Materials and tools that need to be prepared

The material for making a banquette in the hallway with your own hands is wood. Forged models, a frame made of iron, require much more serious experience and skills.

To fully assemble the product you will need:

• Wooden beam - 30*40, 30*50 mm, these parameters are applicable if the design includes strapping and legs. The slats for plywood products have a smaller cross-section.
• You can use ready-made legs, for example, from a stool, low coffee table, benches.
• MDF panels or plywood - sheet of relevant parameters for one-, two-, three-seat work.
• For fastening, you need self-tapping screws, furniture corners, possibly pins, and glue.
• For the soft part of a wooden bench, you need to stock up on filling and a cover.

Fabrics:

• The cover at home is made from suitable fabric, for example: velor, plush, furniture upholstery. The material must be sufficiently dense and wear-resistant. You can use leather or a synthetic substitute.
• The filling material is foam rubber, because it is quite elastic and retains its shape for a long time.

Important! If you want to make a very soft seat, especially with a carriage screed, then in addition to foam rubber, also use padding polyester.

Tools:

• drill, jigsaw, screwdriver;
• level, hammer, screwdrivers;
• threads and needles;
• construction stapler;
• sandpaper of different grits.

Important! In addition, you may need stain or paint and varnish.

The whole process consists of large quantity stages. They are quite simple to perform and require due care and accuracy.

Preparation:

1. Create a drawing of the product, no matter how simple it may seem to you. Determine the dimensions of the hallway and the most approximate parameters of the product.
2. Calculate the capacity of the banquette, since one person occupies an area of ​​45*55 cm.
3. Choose a model with a backrest. It is quite difficult to implement with minimal experience, with drawers, shelves, and legs.
4. Knowing the dimensions of the seat, determine the parameters of all other elements and draw a sketch.
5. If there are quite a lot of parts - partitions, back, shelves, it makes sense to make a pattern, and then start cutting the plywood panel.
6. Cut out the parts using a jigsaw and sand the edges.

Assembling our product

Frame:

1. First of all, cut out the seat - its parameters serve as a starting point, and all other parts, if necessary, are adjusted to the dimensions of this part.
2. If you are making a model with legs, attach 4 wooden planks so that they are able to protrude beyond the edge by 1–2 cm.
3. Sand the resulting workpiece completely and cover it with stain and paint, strictly following all the specified instructions.
4. If the model rests on the sidewalls, here are all the frame elements - sidewalls, seats, bottom part shelves and back wall cut them out immediately, sand them, and then assemble them using pins. To do this, pre-drill blind holes in the ends of the parts themselves.

Models with legs:

• Legs are made from wooden beam. The simplest option is to cut the bars to the height of the bench, then sand them, and attach them to the bottom using corners and self-tapping screws.
• More attractive appearance the legs can be provided with the use of a hand cutter. The tool is quite simple and more affordable than a milling machine. With it you can make the legs round, with protrusions, and in absolutely any case smoother.

Important! Before fixing all the parts together, paint them and cover them with a special varnish.

Seat:

• For a softer seat, remove a piece of foam rubber required size.
• We recommend that you first lay burlap or similar rough material on the bottom, and then secure the foam rubber with a stapler or glue.
• Cut the selected fabric into fragments of the size you need, not forgetting to leave allowances for stitching.
• Fold the fabric inward at the edges and secure with staples.

We cover furniture with fabric ourselves

The method described above allows you to ultimately obtain a product with absolutely flat surface. But while on two- or three-seat versions such an option looks quite presentable, a single-seat banquette will have a completely boring appearance. A pouf that has a carriage tie looks much more interesting.

To do this, take:

• the same tools, including a hand cutter;
• softer and thinner fabric, because it will need to be folded;
• large buttons that are covered with exactly the same material.

Important! Filling in in this case consists of two parts at once. Once you have glued the foam to the bottom, cut out the same piece from the padding polyester.

Manufacturing process:

• If you have some skills, you can mark the places where the buttons are attached directly on the foam rubber. But it is much more preferable to make a pattern: a sheet of paper of the appropriate size, on which you can calculate the number of fastenings and the shape of the folds.

Important! As a rule, these are rhombuses, but you can get more sophisticated shapes. Drill through holes according to the marked positions.

• Lay the padding polyester using hand cutter cut out button holes.
• After this, place the fabric on the seat. It should be laid evenly, but without tension, because folds will form during fastening.
• Afterwards, sew buttons to the fabric in the previously marked places.
• Attach strong strong threads or cords to the buttons, pull them through the holes with a crochet hook and secure them with a stapler.

A DIY banquette like this looks incredibly decorative, and it’s quite easy to make.

Beautiful and functional furniture it is expensive - an axiom that is still relevant in the 21st century. If there is no money to buy, why not do something useful and creative with your own hands? Below is step-by-step instruction how to make a banquette for the hallway with your own hands. We are talking about several sequential steps that require extreme attention to detail.

Preparatory stage

The simplest from a production point of view are considered wooden items furnishings. You should first prepare the following materials:

• wooden beam – 30x50 mm;
• corners for furniture;
• plywood sheets;
• screws, glue, fixing pins;
• Several decorative legs from an old table.

It is better to fill the seat with foam rubber, since it perfectly retains its original shape. A softer analogue is padding polyester. To assemble and adjust individual parts, you will need several tools that almost every owner has:

• jigsaw;
• level;
• screwdriver and drill;
• a set of threads and a set of needles;
• hammer;
• sandpaper;
• construction stapler;
• stain, paint and other decorative solutions.

Deciding on the project

The task of primary importance is to decide optimal project. A drawing of not only the product, but also its individual elements is prepared for it.

It is very important that the size of the furniture matches the parameters of the room.

Each person has an area of ​​45x55 cm (average value). If you have certain skills, you can choose the option with a backrest; in all other cases, it is advisable to make models with drawers and shelves.

The drawings indicate the dimensions of all elements. If it is expected that the banquette will consist of a large number small parts, it’s better to make a pattern and then cut it according to it plywood sheets. The edges of the workpieces are rubbed sandpaper“null” or “micron”.

Assembly of the structure

With absence practical experience When working with wood in general and furniture in particular, you should not prepare all elements of the product in one approach. Certain defects, certain deviations always arise.

First of all, a full-size seat is cut out of plywood, since the rest of the details will depend on its size. Obviously, it is much easier to fit smaller elements under the largest surface.

The second stage is making the legs for the banquette. This is a labor-intensive process, so it makes sense to use ready-made solutions from old furniture(alternatively, you can buy them at furniture store, commission shop). An analogue is to take 4 large bars, process them with a hand mill, and then fix them with self-tapping screws to 4 planks. Wooden legs treated with 2-3 layers of stain or painted to match the color of the interior.

The third stage is the preparation of the supporting sidewalls. They are pre-cut and sanded. Then they are opened with paint or stain. After this, the structure is assembled together using pins (blind holes must be prepared at the ends).

The fourth stage is furniture upholstery. For a hand-made banquette in the hallway, foam rubber is cut to fit the size of the seat. Soft material It is most effective to secure it with a construction stapler. For light loads, construction adhesive is quite suitable. Under the base of the foam rubber it is worth preparing a layer of coarser material; burlap is quite suitable.

The fifth stage is fabric pattern. Taking into account the interior style and load intensity, the optimal fabric is selected. It is very important to cut it in such a way that the piece lies with an allowance on the structure. The cut fabric is folded and secured using a construction stapler.

Making a banquette with your own hands is not a difficult task. When deciding on the drawing and selecting the material, you should focus not only on the design and dimensions, but also on how well the furniture will complement the interior of the hallway. Remember that we are talking about functional subject, and not an exhibition exhibit. From the first time and without experience behind you, create a beautiful and comfortable furniture only a few succeed, so soberly assess your skills and abilities.

The banquette can be called universal subject furniture. Over the decades, its form and purpose have not changed. The banquette is located in various rooms apartments - in the hallway, bedroom, living room. This piece of furniture is a practical pouf, which is comfortable to sit on and put on shoes.

In modern stores you can find quite wide choose banquettes that vary in shape and design. Each manufacturer makes this piece of furniture in such a way as to make it more comfortable and attractive. However, it is not always possible to find an option for your hallway. A DIY bench is a way to get a piece of furniture that fits perfectly into the interior of the room. The work won’t take much time, and it’s always nice to look at the fruits of your efforts.

The benefits of creating a banquette with your own hands

A popular piece of furniture can be constructed with your own hands, even if you have minimal skills in using carpentry tools. The basis of a banquette is most often a stool. This product differs in some ways decorative features, and it’s very simple to do.

Advantages of DIY hallway furniture:

Even a large banquette, which will be installed in a spacious hallway, will not require much time and effort to create. From the fabric chosen to create the bench, you need to cut a piece of the required size. In this case, you should remember about the allowance.

Before work begins, you should consider the design of the finished pouf and familiarize yourself with popular product options. It is important to decide on the size and color palette. Only a master with minimal carpentry skills can avoid mistakes.

First you should lay burlap or similar material, and then secure the foam rubber. The material is fixed using a stapler.

Types of banquettes

There are several common types of banquettes. They differ in shape and strength, but each has its own undeniable advantages worthy of attention:

These banquettes are the most popular. At self-creation Any of these models can be complemented with a pouf with its original details.

Materials

The soft seat is filled with foam rubber. To do this, cut a suitable piece from a large piece of material. To make a bench, it is enough to become familiar with the types of existing upholstery used for such work.

The fabric that will cover the pouf can be made of linen or cotton. Textile models are quite easy to care for. This upholstery is often chosen for the following reasons: large selection shades of material.

Other cladding materials:

Forged products or poufs with a steel frame should be made only with full confidence in your skills in working with metal. The easiest way to make a banquette is from wood. The pouf is usually filled with foam rubber. This material is durable and practical. It is able to hold its shape for a long time and is quite elastic. To make the legs of the pouf more attractive, you should decorate them with hand carvings.

To construct a banquette for the hallway, you will need to prepare the following materials:

• For a pouf that will have legs, you should find wooden beams different sections– 30x40 and 30x50 mm. You can find and use old legs that used to support a stool.
• Plywood sheets.
• Various fasteners - staples, screws.
• Paint or stain.
• Thick foam.
• The fabric with which the bench will be covered.

If desired, you can sew a cover to cover the pouf. This will make caring for it much easier. The fabric for the pouf should look organically with the textiles of the hallway. When constructing a soft seat, in addition to foam rubber, you should use padding polyester. If you are creating a bench with legs, you need to attach 4 wooden planks to its bottom so that they protrude 2 cm beyond the edges of the product.

Tools

To create a high-quality and durable bench, you will need to use the following tools:

• Screwdriver and drill - with the help of these tools will be done various holes for fastening.
• Hammer and screwdriver – irreplaceable helpers every carpenter.
• Construction stapler.
• Level – to determine vertical arrangement banquette legs.
• Sandpaper - it should be of different hardness.
• Manual milling - in the case when the base of the bench is made of beams.
• Sewing machine – for sewing upholstery and covers. For such work you will also need scissors and a tape measure.

First you need to cut out the seat. This is necessary because the creation of the remaining structural elements depends on its size. They are subsequently adjusted to fit the seat. In the absence of sufficient experience in creating pieces of furniture, it is necessary to divide all the work over several days. This way every detail will be done with due attention.

Instructions for making a banquette

Once the seat is completed, you can proceed to the remaining steps. These include making legs or finishing them, marking and cutting foam rubber and plywood, assembling and finishing the product.

Leg finishing

If there are no ready-made legs, they must be built from prepared bars. However, if you use existing parts, they can simply be restored. The surface must be cleaned. Afterwards it is covered with stain or varnish.

The legs will be attached to the seat with self-tapping screws. If you have your own tool, you can process the timber with a hand mill. Thanks to this, you can get the original protrusions of the product. This DIY banquette for the hallway turns out to be quite interesting.

Foam rubber and plywood

It is necessary to prepare foam rubber required sizes. The prepared piece of material should protrude beyond the edges of the plywood for the seat by 3 cm on all sides. Dimensions can be selected independently.

Now you can glue the foam rubber to the plywood. It is better to apply glue closer to the edges. Using a tape measure and chalk, markings are made, along which the buttons will then be sewn. Several holes should be made in the plywood. They should be the same distance from each other. It is better not to touch the foam rubber when performing such work.

Product assembly

Then you should cut out the seat the desired shape from covering fabric. Upholstery sizes are carefully selected in advance. It is then adjusted under the seat. Leave a margin of 2-3 cm on each side. Then the fabric is carefully wrapped and secured with a stapler.

Now you can start installing the buttons. Using a needle, the thread is threaded first into the button, and then into the hole located in the plywood. Rough finish, located at the bottom of the seat, is covered with a textile cloth. The cut piece must be sewn along the edge of the lower part.

If you are using legs from another product, you should choose where to place them, and secure their bases with self-tapping screws. The legs, made of timber, are attached to the seat with screws and corners.

Decorating a banquette

Buttons should be selected in accordance with the shade of the upholstery of the bench seat. Their number depends on personal desires. The bench can be diversified with a decorative cover. It is usually performed in the same style as the upholstery. This kind of work is not difficult. You just need to know how to operate a sewing machine.

If you do not have cutting skills, you should choose a ready-made pattern. You can learn how to create it using certain master classes. Calculate in advance what capacity the banquette will have. For one person an area of ​​45x50 cm is required.

Elements of the bench are cut out using a jigsaw. Their edges should be sanded. When installing a pouf in an Empire style hallway, a carriage screed can be made. Such products look presentable and original.

It is important to determine the size of the hallway and the dimensions of the banquette to be made. In the case of a large number of parts, you should first make a pattern, and then start cutting the plywood.

conclusions

Making a banquette for the hallway with your own hands is quite simple if you know the sequence of work and accurately determine the shape of the product. Materials are selected based on the style of the room and the intended purpose of the banquette. You should not rush while working. This will help avoid serious mistakes. As a result, you can get a beautiful and practical structure. Such furniture is not only useful for guests to relax, but can also serve as a storage place for various small items. At correct selection banquette style, it becomes a decoration for the hallway.

The basic design of a banquette is quite simple - a stool with a soft seat. Often the basis of the product is actually a stool. A larger banquette, if the size of the hallway allows, is no less easy to make. This will require minimal carpentry skills and the ability to hold a needle and thread.

Required materials and tools

The “raw materials” for the product are wood materials. Forged models or furniture with an iron frame will require much more serious skills and experience.

• Wooden beam - 30*40, 30*50 mm, if the design includes legs and strapping. Slats for plywood products have a smaller cross-section.
• Legs can be used ready-made - from a stool, bench, low coffee table.
• Plywood or MDF panels - a sheet of appropriate sizes for a one-, two-, three-seat product.
• Fasteners require furniture corners, screws, glue, and possibly pins.

The soft part of a wooden bench consists of a filler and a cover.

The latter is made at home from suitable fabric - velor, furniture upholstery, plush. The material must be sufficiently dense and wear-resistant. You can use leather or synthetic substitutes.

The filling material, as a rule, is foam rubber - it is quite elastic and holds its shape for a long time. If a very soft seat is being built, especially with a carriage screed, then in addition to foam rubber, padding polyester is also used.

The following tools will be required:

• jigsaw, screwdriver, drill;
• hammer, level, screwdrivers;
• needles and thread, possibly buttons;
• construction stapler for fastening fabric;
• sandpaper of different grits.

In addition, paint or stain and varnish may be needed.

Banquette made of plastic bottles, decorated decoratively with your own hands

How to make a banquette for the hallway with your own hands

The process consists of several stages. All of them are quite simple to implement and require only accuracy and due care.

The following video will help you make a bench with your own hands:

Preparation

At the first stage, it is necessary to create a drawing of the product, no matter how simple it may seem. The parameters of the hallway and the maximum possible dimensions of the product are determined.

The capacity of the banquette is calculated: one person occupies an area of ​​45*55 cm.

The following photos will tell you how to do Various types do-it-yourself banquettes, including those with armrests, in the hallway.

Drawings for making banquettes with your own hands

Wooden frame

With carriage tie

With soft seat

Single

Cylindrical

Product assembly

Photos of do-it-yourself banquettes

Plush

With rattan boxes

With a flower pattern

Leatherette

Do-it-yourself furniture upholstery

The method described above allows you to obtain a product with a smooth surface. But if on two- or three-seat models this option is quite presentable, then a single-seat banquette looks boring. A pouf with a carriage tie looks much more interesting.

To do this, you will need the same tools, including a hand cutter, softer and thinner fabric, since it needs to be folded, and large buttons covered with the same fabric.

This product looks very decorative and is quite simple to make.

The next master class will teach you how to sheathe a banquette with your own hands using the carriage screed technique:

Sew a cover

The model with a soft seat can always be upgraded. To do this, it is quite enough to change the covering or sew a cover. And if the first option requires effort and some experience, then the second only requires the ability to sew on a sewing machine.

A cover with frills is sewn for a banquette without a back and armrests, measuring, for example, 45*45 cm. A variety of fabrics are used for this, but it is advisable, if this product does not have a specific purpose, for example, for a wedding interior, to choose fabrics that are resistant to wear.

The photo patterns below will help you sew a cover for a bench with your own hands.

Photos of covers for a banquette

Making a banquette is not a difficult task at all. And everyone can decorate it to their own taste. The main thing is not to get carried away and remember that this furniture is intended for the hallway of an apartment, and not for an exhibition.

The following video will help you sew a cover for a banquette using a chair as an example:

Photo gallery (17 photos)

Installing a bench is one of the most optimal ways decorate the hallway. This multifunctional piece of furniture will replace several items at once, compactly located in small room or decorating a spacious hall. On modern market presents an unimaginable variety of options for poufs, benches with shoe dryers, drawers, shelves and niches for storing small items, constructed from the most different materials. However, it is not always possible to choose an option that fits perfectly in style and under the allocated dimensions. In this case the best solution will make a banquette for the hallway with your own hands, which will not only harmoniously combine with other items, but also combine all your tastes and preferences.

This popular piece of furniture is easy to make at home, even for a person who does not have extensive experience in carpentry. The accessory is based on a bench, which is subsequently complemented by a soft seat and decorated with curls, fittings and other details.

The main advantages of this independent product will be:

And besides, the creator will be proud of his invention, receiving a dose of positive emotions every day.

What materials will you need?

You can make a pouf or bench from forged, wooden, or plastic. The wood is malleable and easy to work with, so this option is best suited for the amateur beginner. Use MDF, chipboard or plywood, if the legs are planned to be wooden - then you will also need timber. The seat base is usually made of foam rubber, upholstered synthetic fabrics, leather, eco-leather, velor or other textiles available.

So, the raw materials that you need to have in stock to start work:

Please note that it is better to choose fabric that is not easily soiled, dense and resistant to mechanical damage so that during intensive use you do not have to constantly change it, wash it or patch holes.

Required Tools

To implement your idea you need to have:

• Hammer, building level, screwdrivers;
• Screwdriver and drill, as well as a jigsaw;
• For processing wooden surface you will need sandpaper;
• Stapler for mounting fabric elements;
• Sewing kit, decorative accessories.

Just in case, prepare stain or paint materials.

How to make a banquette for the hallway with your own hands

When implementing an idea, the main thing is careful preparation, compliance with the sequence of execution and advice. You need to be extremely careful when using electrical appliances and sharp parts.

Instructions

There are no clear instructions on how to make a bench with your own hands. This is a creative process, and everyone approaches it with different sides. But general steps and rules for creation still exist - this is planning, preparing everyone necessary tools, implementation of assembly and decoration. All steps are described in more detail below.

Preparation

On preparatory stage a drawing or sketch of the future product is created, where all optimal sizes. When planning the length and width, keep in mind that a seat for one person is calculated as 45x55 cm. And also:

Consider the availability of space for drawers or opening the doors of the bedside table, if such are assumed in the project.

Product assembly

The manufacturing process includes the following steps:

Do-it-yourself furniture upholstery

The technology described above allows you to design an ottoman with a perfectly flat surface. And if a long and wide one will look strict and neat, then a small one will look bland and cheap. Think of a carriage hitch - it's one of the simplest and profitable options decorate a “dull” surface.

To create such a covering, you will need all the same materials and tools as when constructing a bench, with the difference that it is better to take thin fabric so that it is convenient to form folds from it, and you will also need buttons covered with the same material.

This product looks very original, and making it with your own hands is not difficult.

Decoration

The main thing in creating decor is that the end result is in harmony with the overall picture in the hallway, is not sticky, easily soiled, and is made of practical material.

A model with a soft seat can always be updated, further decorated or remodeled, thereby making the bench practically new, with a “fresh” interesting appearance.

For example, frame a model without a wall or armrests with a chic cover with frills. They will make a piece of furniture delicate and unusual. Attach a burlap bow or a stylish decorative ribbon at the seams and joints.

Knit the cover with your own hands - then your furniture accessory will become completely original.

Knit the cover yourself.

If the hallway is made in country or Provence style, age the legs and wooden ends, create the effect of peeling paint or scuffs using silver or bronze stains

There is a huge variety of options for how to decorate a banquette; everything is limited only by your imagination. However, if it is not there, use online resources. There you can always find interesting solutions.

Unusual ideas

Creative and talented people have long been using old, worn-out furniture that has become irrelevant, out of fashion or has completely fallen into disrepair to create furniture accessories. Therefore, having a developed imagination, it is not necessary to design an interior item from scratch. It is enough to use ready-made solution, having restored and added some notes to it, emphasizing modern style and design. So you can use an old, unnecessary one as a banquette. wooden box, having modified it a little. Remove all unnecessary components (hinges, rivets, locks, etc.), sand, prime, apply varnish or a layer of paint, cover the lid with leather or decorative fabric, placing foam rubber according to size. You can also decorate it with decorative elements: inserts, drawings, bows. Old chairs connected by bars, old elements of bedside tables, wire products, etc. look original as a banquette. The main thing is that all your fantasies fit into the overall interior.

Making a banquette with your own hands is not difficult. Use materials you already have, or repurpose an old bench or coffee table. Follow detailed instructions and carefully consider the decor that will complement the already created style in your hallway. Take careful measurements to ensure the banquette fits perfectly into the room. Be creative when it comes to decorating, and then you will have a real masterpiece that will greet and welcome guests and become a practical and indispensable part of the hall.

Video: DIY banquette in the hallway

Photo gallery: DIY banquettes for the hallway