Aerosol glue - brands and tips for use. Where and how to use aerosol glue Spray rubber glue

In the production of textiles, it is not always possible to get by with just a thread and a needle. In some cases it may be necessary to connect enough small parts. To solve the problem, you need to use special glue, able to withstand the consequences of washing, ironing and other external influences.

Careful selection chemical composition glue allows you to make the substance stable enough so that during operation adhesive connections the fabrics did not lose their strength.

Although the well-known PVA or instant glue is often used when working with fabric, it is better to use a professional product from the chemical industry. This glue has a number of advantages:

• it does not spread;
• it is completely transparent, operates without traces, odor, and stains;
• good textile glue can survive many washes with aggressive agents.

These qualities are especially important in needlework: when creating decoupage, appliques or other kinds of crafts. In addition to being water resistant, the textile adhesive should also be heat resistant as it will often need to withstand hot ironing.

Textile glue, when applied, forms an elastic film on the fabric that can provide high-quality fastening even when the fabric stretches. This allows the glued parts to adhere firmly to the base.

Another positive attribute - for a long time hardening, which makes it possible to correct the connection during the joining process necessary details to make work more accurate.

Colorless glue is quite versatile - it can easily cope with gluing wool, cotton fabrics, synthetic and artificial products.

Types and scope of application

When working with textiles and other types of materials, several types of adhesives are popular:

• Contact glue, made on the basis of water and solvents various types. Used as furniture glue, when laying floor coverings, while ensuring the connection of textiles with materials such as plastic, wood, glass, etc.
• Polyurethane synthetic based adhesive. Suitable for gluing PVC, plastic, wood, tiles, glass, etc.
• Neoprene adhesive composition. Used when working with textiles, leather, wood, rubber. It features increased heat resistance and strength.
• Nitrocellulose adhesive solution. It is most widely used in footwear factories, as it successfully bonds textiles to leather, etc.
• Rubber based adhesive. Quite elastic, used when working with leather, glass, textiles, rubber, wood. One of the varieties is latex glue.

Acrylic glue can also be used for textiles. It gained universal fame by providing good connection various materials.

Additionally, classification can be carried out according to the method of applying glue to the fabric surface. This category distinguishes between aerosol adhesive, sold in a can, and sprayable textile adhesive in the form of a spray.

Make your own fabric glue

It is not always possible to purchase professional textile glue. Therefore, if you have the necessary components of the mixture at hand, and you need to glue something together as quickly as possible, you can do glue solution on one's own. Here are a couple of recipes:

Dextrin glue

To prepare the composition you will need water and starch. The latter should be placed in an enamel bowl, then placed in drying cabinet. It must be there at a temperature of 160ºC for at least 2 hours.

The next step is to boil water and add the resulting dextrin to it in a 1:1 ratio. Stir the mixture until the dry crumbly substance is completely dissolved in the water. The adhesive composition must be applied as soon as possible, since it hardens quickly.

Casein glue mixture

As in the previous recipe, you only need 2 ingredients - casein and water in a 2:1 ratio. The liquid is added to the container with dry casein in a thin stream.

The mixture should be stirred constantly to achieve homogeneity. This mass also quickly hardens and becomes unusable.

How to remove glue from fabric

Sometimes it is necessary not to glue the fabric, but rather to clean it of the adhesive. For example, if during work the adhesive gets on your clothes. Depending on the type of adhesive solution that got on the textile, the method for removing the stain is selected.

Various substances can play the role of a cleaner:

• vodka
• acetone
• warm water
• cold water
• talc
• vinegar
• solvent
• special paint removers
• gasoline, etc.

Here are several working methods for removing glue:

• Glue moment quite easily soluble with readily available substances - it is removed from the fabric using a rag soaked in gasoline. If the stain is dry, you will need to use solvents or paint removers. But this is only when the fabric is sufficiently resistant to such substances.
• Rubber glue can be removed using a swab soaked in gasoline. The stain area is also treated with gasoline, after which it must be blotted with a sponge and sprinkled with talcum powder.
• Wood glue can be removed by simply soaking the item for 5 hours in cold water and further washing.
• Removing Super Glue carried out using acetone. Before use, it is advisable to test its effect on a small piece of fabric. If textiles react poorly to the substance, it is better to use acidified water. For 1 glass of water add 1 tbsp. l. vinegar.

Textile glue is often called liquid thread because it can hold fabric parts together much more firmly than a regular needle and thread.

Handicraft stores, construction or other specialized stores offer their customers wide choose products. Examples include the following types textile glue, as "Second", Alleskleber or Economy.

Aerosol glue – great option for fast and high-quality gluing of various different surfaces. This adhesive composition has economical consumption, has all the necessary characteristics for convenient and reliable operation.

Aerosol glue is applied by spraying, and this is its main advantage. The formula of this glue allows it to be evenly distributed over the desired surface in the amount required.

Reference! Eat different types such an adhesive substance, and each has its own characteristics. When choosing an adhesive, you need to take into account the resistance to different conditions, amount of mixture, setting time, manufacturer.

There are 2 groups of aerosol adhesives according to the method and adhesion time:

1. Temporary. This composition is used in everyday life for light materials, paper, cardboard, fabric. The advantages will be instant adhesion and the fact that it does not leave marks on the surface after separation.
2. Permanent. Connects firmly and for a long time. Most often used for films, plastic, labels, foil. It is distributed thin layer, invisible, long lasting after quick coupling.

A can of glue provides reusable, so it can be stored for some time. The composition is consumed economically, so it lasts for a long time.

Spray adhesive has the following advantages:

• Versatility.
• Easy to use.
• Economical consumption.
• Reusable.
• Possibility of dosing and controlling the width of the jet.
• Strength of fixation.
• Does not cause deformation of materials and does not spoil their appearance.
• Resistance to aggressive external factors.
• Long service life.
• Possibility of spraying in hard to reach places.
• Does not spread over the surface.
• Ready for use without additional measures.

Brands and cost

Among the variety of spray adhesives special attention The following brands deserve:

1. Multi Spray. The price of a 500 ml can is about 550 rubles. This universal remedy, which can be purchased for gluing various metal materials. The glue is well suited for both temporary and permanent fixation. The manufacturer notes that the product can firmly connect even heavy materials like brick and cement.

2. Abro. Price for 380 ml – about 850 rubles. Universal, popular in the USA, now actively spreading in Russia. Using a convenient spray can, you can apply the product in a thin layer, combining a variety of materials. Produced under the brand different glues for individual purposes, each has its own instructions and scope of use.

3. Tuskbond. The cost of 500 ml is 850 rubles. It is used for different types of fabrics; it can be used to glue leather, velor, Alcantara, and carpet. Popular when working with car dealerships.

4. Scotch Weld. Price for 500 ml – 1450 rubles. Suitable for wood, metal, rubber, leather, film, plastic. The most popular sprays in the line are 75 3M and 77 3M. Most often used for gluing lightweight materials. Positive aspects there will be high connection rates and excellent strength.

5. Presto. The cost of a 400 ml can is from 450 rubles. Universal adhesive in the form of a spray, which has a dispenser that simplifies working with it.

6. Done Deal. Price for 200 ml – 615 rubles. Universal composition, suitable for leather, glass, rubber, fabric. It is used in the repair of car interiors. The composition contains synthetic rubber, propane, butane.

7.Penosil. A 750 ml can costs 430 rubles. Used for facing and construction work, insulation, baseboards, ceramic tiles. Used with a pistol. This composition is something between a spray adhesive and polyurethane foam. It is especially good to use for thermal insulation.

How to choose the right one

When choosing a spray for high-quality gluing, you need to look at different parameters– composition, characteristics, consumption, cost. Very cheap glue cannot be good, in addition, there is a possibility of getting a fake. You also need to look at indicators such as bonded surfaces, working temperature, permissible operating conditions.

The universal gluing spray can be used for:

• Plastic.

• Plywood.

• Polymers.
• Paper, cardboard.

• Ceramic surface.
• Glass.
• Felt.
• Tiles of different types.
• Wooden products.

Scope of application

Depending on the purpose, spray adhesives can be divided into several subtypes:

• For metal and plastic products.

• For rubber – rubber-based, which gives very high-quality fixation. The spray does not disrupt the structure of the material and does not spoil it. After gluing there is no cracking or drying out.
• For carpet materials.

• Universal - wide range of applications, can be used to connect dissimilar surfaces.

Aerosol adhesive has a very wide range of applications:

• Construction. For fixation wooden products, plastic, rubber.

• Advertising. With this glue it is easy to work with complex decorative designs made of metal, polymers, plastic.
• Furniture manufacture. Used to join different fabrics to wood and plastic.

• Textile industry.

• Repair of car interiors. For this industry, spray adhesive is used very often. They can connect plastic, rubber, leather elements. The use of an aerosol eliminates the need for fixation double-sided tape, which does not very reliably connect dissimilar materials.

Reference! Some manufacturers add hardeners to the adhesive to improve properties and speed up drying after application.

How to use and store

First of all, you need to read the instructions. No special skills are required for the job. Spray adhesive is not harmful to health and does not create unnecessary contamination during operation. However, when working, you should adhere to some rules.

Features of working with adhesive in the form of a spray:

• Before gluing, you need to degrease the surfaces and make sure that no particles of dust or lint get on them during the application process.

• Shake the can well before applying.
• Spraying should be carried out at a distance of 20-30 cm.

• We have to wait until completely dry and only then exploit it.
• For better adhesion, you should press the products tightly or use a press.

Reference! While spraying, keep the can parallel to the surface. This will allow you to quickly and evenly apply the glue.

The can should be stored in a dry and dark room so that they don’t fall on him Sun rays. Storage temperature – from +5 to +30 degrees. The period of use is indicated by the manufacturer on the packaging. After it expires, the spray should not be used, as it loses its adhesive properties.

Spray adhesive is very convenient and easy to use when various works. If you take into account the area of ​​use and characteristics when choosing, the product will fully cope with its task. The spray will always be popular due to its invisibility, fastening the most different materials and the possibility of application in hard-to-reach areas.

Aerosol glue (2 videos)

Types and uses of aerosol glue (25 photos)

Aerosol glue is convenient and easy to use when the application surface is uneven. This format is especially loved by car dealerships. Aerosol glue – the best choice for quick and reliable connection parts from various materials. Its main advantage is the application of the adhesive composition by spraying, which is convenient and economical.

Types of glue

There are two types of aerosol glue you can buy:

• For permanent connection of parts made of plastic, film or foil. When sprayed, it covers the surface with a thin layer, sets quickly and long time holds materials together;
• For short-term bonding of materials such as paper, cardboard, fabric. This type of glue has a light structure, thanks to which it is able to instantly hold parts together and is not visible after drying.

How to choose glue

If you need to buy spray adhesive for fabric or other materials, you should carefully choose it. The following criteria must be taken into account:

• the type of material that is acceptable for gluing with this type of glue;
• correspondence of the amount of glue in the container to the volume of work performed;
• compliance with the gluing temperature and operation of the finished product.

Consumption is calculated based on the number of layers applied and the area of ​​application.

You can purchase aerosol glue by article number in our online store website.

Aerosol glue received widespread, which is due to the versatility of the composition and high adhesion rates. It is also important that, thanks to its special release form, it is easy to use and can be stored for a long time.

What it is?

Aerosol adhesive is a universal fixing composition suitable for gluing a large number of materials, including those of different textures. The composition demonstrates high adhesion, fast setting time, and ease of use. A special feature of this composition is its release form - it is sold in the form of a spray in cans. To apply glue to the surface, you do not need to have professional skills or purchase tools (brushes, rollers). The spray jet penetrates even hard-to-reach places, providing high-quality fixation. It is also important that thanks to the dispenser and large spray coverage, economical glue consumption is ensured. Even in open form Most formulations do not dry for more than 12 months.

This composition is suitable for paper and fabrics, polyethylene, foil, polystyrene foam products, for metal and plastic bases (which allows it to be used in short-term automotive repairs), for wood (used for furniture repair), for rubber, artificial and natural leather. In addition, the glue reliably connects ceramics and glass. Wide scope application is due not only to the characteristics of the composition, but also to the colorlessness of the glue. When dry, it forms a transparent layer, does not leave stains or streaks, does not cause warping of materials - the joints remain invisible. This glue can replace double-sided tape. It is widely used in repair work, in everyday life and at work, and is also extremely popular among motorists, because it fixes almost all the details of the interior, dries quickly, and the small volume of the bottle fits even in the glove compartment.

Properties and composition

In many ways, the composition of aerosol adhesive is similar to the composition of adhesive mixtures for certain surfaces, but in addition to them, it contains liquefied gas and other components that provide aerosol form. A large number of aerosols have a rubber base combined with solvents. There are sprays on neoprene, butadiene styrene and polyurethane bases. The latter, in their principle of action, are somewhat similar to two-component compositions based on polyurethane foam with a hardener. Today on the market you can also find odorless aerosols with an acrylic dispersed base. Regardless of the composition, all sprays demonstrate high adhesive strength and adhesion, rapid drying and sprayability. The addition of individual components increases certain characteristics of the composition, for example, providing it with increased moisture strength or frost resistance.

Kinds

Depending on exposure time Aerosol glue comes in the following types:

• for short-term gluing - the composition is intended for temporary fixation of paper, fabric, used in repair work;
• for long-term fixation - provides a longer and stronger connection of materials and parts, the subsequent dismantling of which becomes not always possible.

Depending on the material for which the glue is intended, the following types are distinguished:

• for textiles and paper - usually these compounds produce a temporary effect, and after separating the materials they do not turn yellow or deteriorate;
• for foil and film – provide both short-term and long-term fixation;
• compound polypropylene materials with wood or metal - such compositions demonstrate increased adhesion;
• compounds for rubber - they are characterized by the fact that they do not destroy the structure of the material;
• aerosol for carpets, carpet;
• spray for polystyrene foam - also does not harm the structure and integrity of the material;
• compositions for plastic.

Finally, there are universal versions suitable for joining most types of materials in all conditions. To apply drawings, you should use a special glue for stencils. Before use, you need to make sure that the stencils themselves will not be printed or become wet under the influence of the spray. Universal contact adhesive can be produced in cylinders and cylinders. The modification in a can is convenient if you need to spray glue in hard-to-reach places. The cylinder is usually equipped with a hose and an applicator, so it is convenient to use for applying glue to large areas. Assembly adhesive in a cylinder can also be used to seal joints and crevices of various surfaces made of concrete and plastic. For the same purposes, you can use a composition from a cylinder if it is equipped with a nozzle for more precise, less voluminous spraying.

Review of manufacturers

Only glue from a reputable manufacturer demonstrates high-quality fixation.

You should not expect the appearance of withered characteristics from the composition in an unnamed cylinder.

• The trust of customers has been won by the waterproof adhesive spray “3M” based on elastomers and solvents, which ensures increased moisture resistance of the composition. However, the adhesive is not suitable for surfaces in contact with oils and gasoline-containing liquids. Suitable for use at temperatures from -30 to +100ºС. If necessary, you can re-glue the materials; the glue does not leave marks and does not cause deformations. The range of adhesives of this brand is quite wide and includes compositions specifically for metal, wood, plastic, polystyrene foam and rubber surfaces. Each cylinder has its own number, and different compositions may vary in spray intensity.

• When super strong connections are required, Multi Spray is usually recommended. Certificate high adhesion composition can be considered that it is used even in aircraft and shipbuilding. The adhesive demonstrates high-quality adhesion even when applied to rough, dusty surfaces, so it can be used for fixing rubber bases to concrete ones. It is based on unique rubber components. The list of materials to be glued is very large.

• Positive reviews also receives Abro glue. In addition to excellent technical characteristics, users note the presence of several replaceable nozzles in the kit - a thin “neck” for applying the composition to narrow surfaces and a standard aerosol. The glue dries quickly, but is not suitable for all materials, since some light ones may not “take”, while heavy ones glue almost everything. This glue has several varieties. First of all, this is universal composition, but when applied to painted surfaces it can ruin them appearance, and specialized for specific types grounds.

• For fabrics, including car interior trim, Tuskbond glue is useful. It bonds even very thin materials without forming a hard “backing” or stains. For the same purposes, you can also use the universal composition Done Deal.

Instructions for use

Apply glue only to clean, dry and grease-free surfaces. Otherwise, its adhesion is reduced. Before spraying the glue, shake the can vigorously several times. After this, remove the cap and direct it with a spray (the point from which the composition comes out) onto the surfaces to be glued. The correct distance to them is 20–40 cm. As a rule, the manufacturer indicates from what distance to spray.

The glue container must be held parallel to the surface being glued, which will ensure its uniform spraying. In order to increase the bonding strength, you can apply glue in two layers, and after fixing the materials or parts, press them for a few seconds. If light bases are being combined, it is enough to apply the spray in one layer to only one of them. When connecting heavy or porous surfaces, it is recommended to apply glue to each surface, and this can be done in two layers. A little trick will help you use glue until the very end without any residue. At the end of use, turn the bottle over and press the sprayer until air begins to come out of it.

High-tech and extremely convenient aerosol glue. This is an excellent option for fast and high-quality bonding of a wide variety of materials. It has economical consumption and high connection strength. The peculiarity of this glue lies in the method of its application by spraying, the same property is its main advantage.

Varieties and features

The unique formula of the aerosol glue allows the substance to be evenly distributed over the surface. It immediately begins its action and instantly glues materials together. Some species are resistant to high and low temperatures, humidity and chemical reagents. The ability to spray the glue is achieved due to the dichloroethane substance present in the composition.

Based on the time and mechanism of adhesion, the group of aerosol adhesives can be logically divided into 2 categories:

1. For temporary fastening of materials. This adhesive is used for fabric and paper, repair and decoration. Its advantages are that it leaves no residue and sets instantly.
2. In order to obtain permanent results. This adhesive composition is ideal for strong and long-term gluing of lightweight materials - plastic, foil, labels, films. The glue lays on a thin layer and is not noticeable on the surface, dries quickly and lasts a long time.

Aerosol adhesive firmly bonds different types materials among themselves, its consumption is economical, the can is convenient for storage and can be reused.